Skip to contentSkip to conversation

morse code panics for 2.5.65

PATCH New Tomas Szepe 1 participant 1 message Mar 18, 2003

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 morse code panics for 2.5.65

Arch-independent morse code panics.
Rediffed against 2.5.65.

drivers/char/keyboard.c +21 -0
diff -urN a/drivers/char/keyboard.c b/drivers/char/keyboard.c
@@ -260,6 +260,27 @@
 }
 
 /*
+ * Turn all possible leds on or off.
+ */
+void kd_set_led_all(int state)
+{
+	struct list_head *node;
+	state = state ? 1 : 0;
+
+	list_for_each(node, &kbd_handler.h_list) {
+		struct input_handle *handle = to_handle_h(node);
+		if (test_bit(EV_LED, handle->dev->evbit)) {
+			int led;
+			for (led = 0; led <= LED_MAX; led++) {
+				if (test_bit(led, handle->dev->ledbit))
+					input_event(handle->dev, EV_LED, led,
+						state);
+			}
+		}
+	}
+}
+
+/*
  * Setting the keyboard rate.
  */
 static inline unsigned int ms_to_jiffies(unsigned int ms) {
include/linux/morseops.h +23 -0
diff -urN a/include/linux/morseops.h b/include/linux/morseops.h
@@ -0,0 +1,23 @@
+/*  Yes, it's morse code ops indeed.  */
+
+#ifndef _LINUX_MORSEOPS_H
+#define _LINUX_MORSEOPS_H
+
+#include <linux/config.h>
+
+#ifdef CONFIG_MORSE_PANICS
+
+extern const unsigned char morsetable[];	/* in kernel/morse.c */
+void panic_morseblink(char *buf);		/* in kernel/morse.c */
+
+static inline unsigned char tomorse(char c) {
+	if (c >= 'a' && c <= 'z')
+		c -= 'a' - 'A';
+	return (c >= '"' && c <= '_') ? morsetable[c - '"'] : 0;
+}
+
+#else	/* CONFIG_MORSE_PANICS */
+# define panic_morseblink(buf)		do { } while (0)
+#endif	/* CONFIG_MORSE_PANICS */
+
+#endif	/* _LINUX_MORSEOPS_H */
include/linux/vt_kern.h +3 -0
diff -urN a/include/linux/vt_kern.h b/include/linux/vt_kern.h
@@ -33,7 +33,10 @@
 	wait_queue_head_t paste_wait;
 } *vt_cons[MAX_NR_CONSOLES];
 
+/* keyboard.c */
+
 extern void kd_mksound(unsigned int hz, unsigned int ticks);
+extern void kd_set_led_all(int state);
 extern int kbd_rate(struct kbd_repeat *rep);
 
 /* console.c */
init/Kconfig +15 -0
diff -urN a/init/Kconfig b/init/Kconfig
@@ -108,6 +108,21 @@
 		     13 =>  8 KB
 		     12 =>  4 KB
 
+config MORSE_PANICS
+	bool "Morse code panics"
+	depends on VT
+	help
+	  When enabled, this code will make a panicking kernel cry for
+	  help in morse code, signalling on the leds of a possibly attached
+	  keyboard and/or a bleeper.  You can enable/disable your morse
+	  output devices of choice using the "panicmorse" kernel boot
+	  parameter.  Currently, "panicmorse=0" will disable the signalling
+	  completely, "panicmorse=1" (the default) will only blink the leds,
+	  "panicmorse=2" will only beep, and "panicmorse=3" will do both.
+
+	  If unsure, say Y.  This feature is very helpful to those who
+	  spend most of their time in X.
+
 endmenu
 
 
kernel/Makefile +1 -0
diff -urN a/kernel/Makefile b/kernel/Makefile
@@ -18,6 +18,7 @@
 obj-$(CONFIG_BSD_PROCESS_ACCT) += acct.o
 obj-$(CONFIG_SOFTWARE_SUSPEND) += suspend.o
 obj-$(CONFIG_COMPAT) += compat.o
+obj-$(CONFIG_MORSE_PANICS) += morse.o
 
 ifneq ($(CONFIG_IA64),y)
 # According to Alan Modra <[email protected]>, the -fno-omit-frame-pointer is
kernel/morse.c +229 -0

229 lines not on this page · raw message

kernel/panic.c +3 -1
diff -urN a/kernel/panic.c b/kernel/panic.c
@@ -16,6 +16,7 @@
 #include <linux/init.h>
 #include <linux/sysrq.h>
 #include <linux/interrupt.h>
+#include <linux/morseops.h>
 
 asmlinkage void sys_sync(void);	/* it's really int */
 
@@ -95,7 +96,8 @@
         disabled_wait(caller);
 #endif
 	local_irq_enable();
-	for(;;) {
+	for (;;) {
+		panic_morseblink(buf);
 		CHECK_EMERGENCY_SYNC
 	}
 }