Skip to contentSkip to conversation

2.5 BK boot hang after ide

DISCUSSION Felipe Alfaro Solana 1 participant 1 message Mar 23, 2003

lore
Share & tools
lore
#0 lore raw

----- Original Message -----
From: Duncan Sands <[email protected]>
Date: Sun, 23 Mar 2003 15:34:50 +0100
To: "Felipe Alfaro Solana" <[email protected]>, [email protected]
Subject: Re: 2.5 BK boot hang after ide

Quoted 6 lines
Quoted 6 lines

I'm experiencing exactly the same as you: 2.5 won't continue past IDE. I've tried 2.5.65-ac3, 2.5.65-bk3 and 2.5.65-mm4. All of them fail at the same point. I've tried using ACPI, APM, disabling preempt, TCQ, enabling SysRq support, but had no luck.

Quoted 9 lines
Quoted 4 lines

The machine is a Pentium 4 2.0Gz, with a QDI PlatiniX 2D/533-A (i845E), 2 UDMA100 disks (Seagate ST380021A 80GB and IBM-DTLA-307030 20GB), a Pioneer DVD-ROM and Sony CRX185E3).

2.5 BK worked for me two days ago, i.e. before Alan's latest IDE changes went in. Did any previous version work for you?

Yes, the last one I tried, before trying 2.5.65, was vanilla 2.5.64, if my memory serves me well :-)

Signature · 5 lines
______________________________________________
http://www.linuxmail.org/
Now with e-mail forwarding for only US$5.95/yr

Powered by Outblaze