Kconfig fixes

@@ -134,7 +134,7 @@
 	depends on NET_RADIO && PCMCIA
 
 config PCMCIA_RAYCS
-	tristate "Aviator/Raytheon 2.4MHz wireless support"
+	tristate "Aviator/Raytheon 2.4GHz wireless support"
 	depends on NET_RADIO && PCMCIA
 	---help---
 	  Say Y here if you intend to attach an Aviator/Raytheon PCMCIA

@@ -189,6 +189,8 @@
 	  configure your card and that /etc/pcmcia/wireless.opts works :
 	  <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>
 
+	  If you compile this as a module, it will be called "hermes".
+
 config APPLE_AIRPORT
 	tristate "Apple Airport support (built-in)"
 	depends on ALL_PPC && HERMES

@@ -196,7 +198,9 @@
 	  Say Y here to support the Airport 802.11b wireless Ethernet hardware
 	  built into the Macintosh iBook and other recent PowerPC-based
 	  Macintosh machines. This is essentially a Lucent Orinoco card with 
-	  a non-standard interface
+	  a non-standard interface.
+
+	  If you compile this as a module, it will be called "airport".
 
 config PLX_HERMES
 	tristate "Hermes in PLX9052 based PCI adaptor support (Netgear MA301 etc.) (EXPERIMENTAL)"

@@ -212,6 +216,8 @@
 	  Support for these adaptors is so far still incomplete and buggy.
 	  You have been warned.
 
+	  If you compile this as a module, it will be called "orinoco_plx".
+
 config PCI_HERMES
 	tristate "Prism 2.5 PCI 802.11b adaptor support (EXPERIMENTAL)"
 	depends on PCI && HERMES && EXPERIMENTAL

@@ -222,6 +228,8 @@
 	  common.  Some of the built-in wireless adaptors in laptops are of
 	  this variety.
 
+	  If you compile this as a module, it will be called "orinoco_pci."
+
 # If Pcmcia is compiled in, offer Pcmcia cards...
 comment "Wireless 802.11b Pcmcia/Cardbus cards support"
 	depends on NET_RADIO && PCMCIA

@@ -246,6 +254,8 @@
 	  configure your card and that /etc/pcmcia/wireless.opts works:
 	  <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
 
+	  If you compile this as a module, it will be called "orinoco_cs".
+
 config AIRO_CS
 	tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
 	depends on NET_RADIO && PCMCIA

@@ -259,7 +269,7 @@
 	  supports OEM of Cisco such as the DELL TrueMobile 4800 and Xircom
 	  802.11b cards.
 
-	  This driver support both the standard Linux Wireless Extensions
+	  This driver supports both the standard Linux Wireless Extensions
 	  and Cisco proprietary API, so both the Linux Wireless Tools and the
 	  Cisco Linux utilities can be used to configure the card.
 

@@ -268,6 +278,8 @@
 	  for location).  You also want to check out the PCMCIA-HOWTO,
 	  available from <http://www.linuxdoc.org/docs.html#howto>.
 
+	  If you compile this as a module, it will be called "airo_cs".
+
 # yes, this works even when no drivers are selected
 config NET_WIRELESS
 	bool

@@ -73,7 +73,7 @@
 
 	  This driver is also available as a module ( = code which can be
 	  inserted in and removed from the running kernel whenever you want).
-	  The module will be called serial_cs.  If you want to compile it as
+	  The module will be called 8250_cs.  If you want to compile it as
 	  a module, say M here and read <file:Documentation/modules.txt>.
 	  If unsure, say N.
 

@@ -364,8 +364,7 @@
 	  This driver is also available as a module ( = code which can be
 	  inserted in and removed from the running kernel whenever you want).
 	  If you want to compile it as a module, say M here and read
-	  Documentation/modules.txt. The module will be called
-	  wafer5823wdt.o
+	  Documentation/modules.txt. The module will be called "wafer5823wdt".
 
 config CPU5_WDT
 	tristate "SMA CPU5 Watchdog"

@@ -374,7 +373,7 @@
 	  TBD.
 	  This driver is also available as a module ( = code which can be
 	  inserted in and removed from the running kernel whenever you want).
-	  The module is called cpu5wdt.o.  If you want to compile it as a
+	  The module is called "cpu5wdt".  If you want to compile it as a
 	  module, say M here and read <file:Documentation/modules.txt>.
 
 endmenu

@@ -9,7 +9,7 @@
   	   or zSeries. This device driver supports Token Ring (IEEE 802.5),
   	   FDDI (IEEE 802.7) and Ethernet. 
 	   This option is also available as a module which will be
-	   called lcs.o . If you do not know what it is, it's safe to say "Y".
+	   called "lcs". If you do not know what it is, it's safe to say "Y".
 
 config CTC
 	tristate "CTC device support"

@@ -20,7 +20,7 @@
 	  coupling using ESCON. It also supports virtual CTCs when running
 	  under VM. It will use the channel device configuration if this is
 	  available.  This option is also available as a module which will be
-	  called ctc.o.  If you do not know what it is, it's safe to say "Y".
+	  called "ctc".  If you do not know what it is, it's safe to say "Y".
 
 config IUCV
 	tristate "IUCV device support (VM only)"

@@ -28,7 +28,7 @@
 	help
 	  Select this option if you want to use inter-user communication
 	  vehicle networking under VM or VIF.  This option is also available
-	  as a module which will be called iucv.o. If unsure, say "Y".
+	  as a module which will be called "iucv". If unsure, say "Y".
 
 config CCWGROUP
  	tristate

@@ -762,7 +762,7 @@
 
 	  This driver is also available as a module ( = code which can be
 	  inserted in and removed from the running kernel whenever you want).
-	  The module will be called typhoon.o.  If you want to compile it as a
+	  The module will be called "typhoon".  If you want to compile it as a
 	  module, say M here and read <file:Documentation/modules.txt> as well
 	  as <file:Documentation/networking/net-modules.txt>.
 

@@ -99,6 +99,6 @@
 
 	  This driver is also available as a module ( = code which can be
 	  inserted in and removed from the running kernel whenever you want).
-	  The module will be called xtkbd.o. If you want to compile it as a
+	  The module will be called xtkbd. If you want to compile it as a
 	  module, say M here and read <file:Documentation/modules.txt>.
 

@@ -116,6 +116,6 @@
 
 	  This driver is also available as a module ( = code which can be
 	  inserted in and removed from the running kernel whenever you want).
-	  The module will be called rpckbd.o. If you want to compile it as a
+	  The module will be called rpckbd. If you want to compile it as a
 	  module, say M here and read <file:Documentation/modules.txt>.
 

@@ -130,6 +130,6 @@
 
 	  This driver is also available as a module ( = code which can be
 	  inserted in and removed from the running kernel whenever you want).
-	  The module will be called logibm.o. If you want to compile it as a
+	  The module will be called logibm. If you want to compile it as a
 	  module, say M here and read <file.:Documentation/modules.txt>.
 

@@ -105,7 +105,7 @@
 	     Anycom Bluetooth CF Card
 
 	  Say Y here to compile support for HCI BlueCard devices into the
-	  kernel or say M to compile it as module (bluecard_cs.o).
+	  kernel or say M to compile it as module (bluecard_cs).
 
 config BT_HCIBTUART
 	tristate "HCI UART (PC Card) device driver"