2.5.66-mm3: hang and crash
Just tried mm3 for the fun of it with two results:
1. If I leave my Xircom card in the PCMCIA slot, the kernel hangs at the following point during boot:
Yenta IRQ list 00b8, PCI irq 10
Socket Status: 30000820
*hang*
This does not happen if the card is not in plugged in.
2. After I booted, I logged into X, started up my mutts (6 of em) and started moving the mouse cursor about. Laptop turned itself off.
Signature · 6 lines
Martin's distress was in contrast to the bitter satisfaction of some of his fellow marines as they surveyed the scene. "The Iraqis are sick people and we are the chemotherapy," said Corporal Ryan Dupre. "I am starting to hate this country. Wait till I get hold of a friggin' Iraqi. No, I won't get hold of one. I'll just kill him." - http://www.informationclearinghouse.info/article2479.htm
Quoted 7 lines · CaT
Just tried mm3 for the fun of it with two results:
1. If I leave my Xircom card in the PCMCIA slot, the kernel hangs at the following point during boot:
Quoted 5 lines
Yenta IRQ list 00b8, PCI irq 10
Socket Status: 30000820
*hang*This does not happen if the card is not in plugged in.
Russell is working on that one.
Quoted 2 lines
2. After I booted, I logged into X, started up my mutts (6 of em) and started moving the mouse cursor about. Laptop turned itself off.
The first thing to do when a -mm kernel mysteriously explodes is to try just the Linus part. Could you please do that?
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.5/2.5.66/2.5.66-mm3/broken-out/linus.patch
It is against 2.5.66.
Quoted 5 lines · Andrew Morton
Quoted 2 lines
2. After I booted, I logged into X, started up my mutts (6 of em) and started moving the mouse cursor about. Laptop turned itself off.
The first thing to do when a -mm kernel mysteriously explodes is to try just the Linus part. Could you please do that?
Done.
Quoted 3 lines
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.5/2.5.66/2.5.66-mm3/broken-out/linus.patch
It is against 2.5.66.
I had to apply the framebuffer patch so that my kernel would not crash for that reason (this was applied to the original mm3 aswell - forgot to metnion). Also the percentile tmpfs was applied. Normal kernel works fine with both patches.
Still, the linus.patch produced the same result. If you think it's worthwhile I'll compile out the fa and perc patchesb but I didn't think it significant due to them workign just fine with 2.5.66.
Signature · 6 lines
Martin's distress was in contrast to the bitter satisfaction of some of his fellow marines as they surveyed the scene. "The Iraqis are sick people and we are the chemotherapy," said Corporal Ryan Dupre. "I am starting to hate this country. Wait till I get hold of a friggin' Iraqi. No, I won't get hold of one. I'll just kill him." - http://www.informationclearinghouse.info/article2479.htm
Quoted 4 lines · CaT
Still, the linus.patch produced the same result. If you think it's worthwhile I'll compile out the fa and perc patchesb but I didn't think it significant due to them workign just fine with 2.5.66.
Well you've already worked out that the problem is due to the i2c and/or sensors changes, yes?
That's the area to start backing stuff out to work out where it broke.
Quoted 9 lines · Andrew Morton
Quoted 3 lines · CaT
Still, the linus.patch produced the same result. If you think it's worthwhile I'll compile out the fa and perc patchesb but I didn't think it significant due to them workign just fine with 2.5.66.
Well you've already worked out that the problem is due to the i2c and/or sensors changes, yes?
That's the area to start backing stuff out to work out where it broke.
Some more info for you: -bk10 is working fine (except for the pcmcia thing). Was able to start up my mutts and am currently compiling it with I2C code to see if it goes then.
Signature · 6 lines
Martin's distress was in contrast to the bitter satisfaction of some of his fellow marines as they surveyed the scene. "The Iraqis are sick people and we are the chemotherapy," said Corporal Ryan Dupre. "I am starting to hate this country. Wait till I get hold of a friggin' Iraqi. No, I won't get hold of one. I'll just kill him." - http://www.informationclearinghouse.info/article2479.htm
Quoted 4 lines · CaT
Just tried mm3 for the fun of it with two results:
1. If I leave my Xircom card in the PCMCIA slot, the kernel hangs at the following point during boot:
It's a know problem... Russell King its working on it. Please, be patient :-)
For now, you can try removing the card from the PCMCIA slot, booting the kernel and then, inserting the card.
Thanks!
________________________________________________________________________
Linux Registered User #287198