Recomended IDE-RAID MB
Hi All,
What brand of motherboard would you use for just mirroring two huge
IDE drives?
Best - Andrew
Quoted 3 lines · Andrew B. Cramer
What brand of motherboard would you use for just mirroring two huge
IDE drives?
I'd just make sure the drives were fast, that the MB supported ATA100 and that you used 80w IDE cables. My Soyo Dragon Plus gets fairly good throughput; unfortunately, my drives are too slow, which means the total performance would be better than:
Version 1.02c ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
blackjesus 512M 7128 64 8339 6 4925 3 8256 70 13530 5 161.1 0
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
16 11707 97 +++++ +++ 13882 99 8859 76 +++++ +++ 12141 100In my experience it takes at the most 5 minutes to resync the (on-average) 2GB partitions it is cut up into.
This board also includes Promise IDE Hardware RAID, but I've never used it and can't comment on its performance.
Take care,
--
Christian Reis, Senior Engineer, Async Open Source, Brazil.
http://async.com.br/~kiko/ | [+55 16] 261 2331 | NMFL
Christian,
Thank you for your input. Just about any speed drive will eat up a T-
1. I'm just looking for maybe most supported, and reliable. Drives are cheap and I will be getting either ATA100 or 133 drives.
Best - Andrew
Quoted 34 lines · Christian Reis
Quoted 3 lines · Andrew B. Cramer
What brand of motherboard would you use for just mirroring two huge
IDE drives?I'd just make sure the drives were fast, that the MB supported ATA100 and that you used 80w IDE cables. My Soyo Dragon Plus gets fairly good throughput; unfortunately, my drives are too slow, which means the total performance would be better than:
Version 1.02c ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks-- Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP blackjesus 512M 7128 64 8339 6 4925 3 8256 70 13530 5 161.1 0 ------Sequential Create------ --------Random Create-------- -Create-- --Read--- -Delete-- -Create-- --Read--- -Delete-- files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP 16 11707 97 +++++ +++ 13882 99 8859 76 +++++ +++ 12141 100In my experience it takes at the most 5 minutes to resync the (on-average) 2GB partitions it is cut up into.
This board also includes Promise IDE Hardware RAID, but I've never used it and can't comment on its performance.
Take care,
--
Christian Reis, Senior Engineer, Async Open Source, Brazil.
http://async.com.br/~kiko/ | [+55 16] 261 2331 | NMFL
-
To unsubscribe from this list: send the line "unsubscribe linux-admin" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
In my experience where I work, the Tyan motherboards with built in RAID work well.
Some of them have Promise RAID chip, and the higher end ones have Adaptec RAID chip, integrated on the motherboard.
I have no throughput test numbers to give.
Quoted 51 lines · Andrew B. Cramer
Christian,
Thank you for your input. Just about any speed drive will eat up a T-
1. I'm just looking for maybe most supported, and reliable. Drives are cheap and I will be getting either ATA100 or 133 drives.Best - Andrew
Quoted 27 lines · Christian Reis
Quoted 4 lines · Andrew B. Cramer
What brand of motherboard would you use for just mirroring two huge
IDE drives?I'd just make sure the drives were fast, that the MB supported ATA100 and that you used 80w IDE cables. My Soyo Dragon Plus gets fairly good throughput; unfortunately, my drives are too slow, which means the total performance would be better than:
Version 1.02c ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks-- Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP blackjesus 512M 7128 64 8339 6 4925 3 8256 70 13530 5 161.1 0 ------Sequential Create------ --------Random Create-------- -Create-- --Read--- -Delete-- -Create-- --Read--- -Delete-- files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP 16 11707 97 +++++ +++ 13882 99 8859 76 +++++ +++ 12141 100In my experience it takes at the most 5 minutes to resync the (on-average) 2GB partitions it is cut up into.
This board also includes Promise IDE Hardware RAID, but I've never used it and can't comment on its performance.
Quoted 11 lines
Take care,
--
Christian Reis, Senior Engineer, Async Open Source, Brazil.
http://async.com.br/~kiko/ | [+55 16] 261 2331 | NMFL
-
To unsubscribe from this list: send the line "unsubscribe linux-admin" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 7 lines
-
To unsubscribe from this list: send the line "unsubscribe linux-admin" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
- --
- -----------
73 de K6LNX
Matt M.
LinuxKnight
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (MingW32)
iD8DBQE+kKZS84ta5vs8jhYRArGGAKDUsbfohx+31aN8ZwKeaCsd4wOk9QCgxuiT /fIvvaBwWRdl3r9Ofq2WvMo=
=gh+2
-----END PGP SIGNATURE-----
Thanks,
I like TYAN except they have been quite restrictive with memory
requirements before. I'll look at their products again. I think the AHA-RAID chip makes more sense.
Cheers - Andrew (ICQ # 243211228)
Quoted 95 lines · Matt McKenzie
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1In my experience where I work, the Tyan motherboards with built in RAID work well.
Some of them have Promise RAID chip, and the higher end ones have Adaptec RAID chip, integrated on the motherboard.I have no throughput test numbers to give.
Quoted 52 lines · Andrew B. Cramer
Christian,
Thank you for your input. Just about any speed drive will eat up a T-
1. I'm just looking for maybe most supported, and reliable. Drives are cheap and I will be getting either ATA100 or 133 drives.Best - Andrew
Quoted 27 lines · Christian Reis
Quoted 4 lines · Andrew B. Cramer
What brand of motherboard would you use for just mirroring two huge
IDE drives?I'd just make sure the drives were fast, that the MB supported ATA100 and that you used 80w IDE cables. My Soyo Dragon Plus gets fairly good throughput; unfortunately, my drives are too slow, which means the total performance would be better than:
Version 1.02c ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks-- Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP blackjesus 512M 7128 64 8339 6 4925 3 8256 70 13530 5 161.1 0 ------Sequential Create------ --------Random Create-------- -Create-- --Read--- -Delete-- -Create-- --Read--- -Delete-- files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP 16 11707 97 +++++ +++ 13882 99 8859 76 +++++ +++ 12141 100In my experience it takes at the most 5 minutes to resync the (on-average) 2GB partitions it is cut up into.
This board also includes Promise IDE Hardware RAID, but I've never used it and can't comment on its performance.
Quoted 11 lines
Take care,
--
Christian Reis, Senior Engineer, Async Open Source, Brazil.
http://async.com.br/~kiko/ | [+55 16] 261 2331 | NMFL
-
To unsubscribe from this list: send the line "unsubscribe linux-admin" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.htmlQuoted 7 lines
-
To unsubscribe from this list: send the line "unsubscribe linux-admin" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html- --
- -----------
73 de K6LNXMatt M.
LinuxKnight-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (MingW32)iD8DBQE+kKZS84ta5vs8jhYRArGGAKDUsbfohx+31aN8ZwKeaCsd4wOk9QCgxuiT /fIvvaBwWRdl3r9Ofq2WvMo=
=gh+2
-----END PGP SIGNATURE------
To unsubscribe from this list: send the line "unsubscribe linux-admin" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Kernel Panic
In reply to Andrew B. CramerDear Linux Admin,
On Linux 2.4 I have had three Kernel Panics recently.
They include the following: journal.o "( ret != 0 )". I see in the source code that there is an assertion: J_ASSERT(ret != 0) in the function:
unsigned long journal_bmap(journal_t *journal, unsigned long blocknr)
Which looks like a possible place for the origin of this.
There is also a large amount of Hex data, which I do not have, unless logged somewhere on my system unknown to me. (I don't get many Panics, not sure where panic data is logged...)
On reboot I loose files. Although nothing serious yet.
The system is a POP3 server, handling about 1,000 email files and about 10,000 email's a day, so there is constantly great disk load by sendmail and the default redhat POP3.
Should I upgrade my kernel, or may I be doing something specific to cause this?
Thanks with any help,
Ben Clewett.
Re: Kernel Panic
Sounds to me like you have bad sectors on your harddisk that the journalling file system is trying to work around. What file system are you using and what hardware?
cheers
Jamie...
Quoted 33 lines
Dear Linux Admin,
On Linux 2.4 I have had three Kernel Panics recently.
They include the following: journal.o "( ret != 0 )". I see in the source code that there is an assertion:
J_ASSERT(ret != 0)in the function:unsigned long
journal_bmap(journal_t *journal, unsigned long blocknr)Which looks like a possible place for the origin of this.
There is also a large amount of Hex data, which I do not have, unless logged somewhere on my system unknown to me. (I don't get many Panics, not sure where panic data is logged...)
On reboot I loose files. Although nothing serious yet.
The system is a POP3 server, handling about 1,000 email files and about 10,000 email's a day, so there is constantly great disk load by sendmail
and the default redhat POP3.Should I upgrade my kernel, or may I be doing something specific to cause this?
Thanks with any help,
Ben Clewett.
-
To unsubscribe from this list: send the line "unsubscribe linux-admin" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Signature · 1 line
** This message was transmitted on 100% recycled electrons **
Re: Kernel Panic
The filesystem are ext2 and ex3:
Filesystem Type 1M-blocks Used Available Use% Mounted on /dev/hda3 ext3 37038 1860 33296 6% / /dev/hdc1 ext3 1969 119 1750 7% /apache /dev/hda1 ext2 30 6 23 19% /boot /dev/hdc3 ext2 37560 279 35373 1% /var/spool/mail /dev/hdc4 ext2 35087 76 33229 1% /home
The kernel panic mensions journal.o so I guess this must be an ext3 partision? Probably on the '/' as no files in the 'apache' are ever effected.
I am not sure about the hardware, it's not easy to check, but I belive my /dev/hda is a 40Gb someting purchaced a year back. On IDE. Either a Seagate, a Fujisu or a Western Digital. (Can't get cover off as rack-mounted and rack screwed into removable cover :)
I hope you can help me, as the implications of an old kernel or an old disk have radically different fix's :)
Ben
Quoted 45 lines · Jamie Harris
Sounds to me like you have bad sectors on your harddisk that the journalling file system is trying to work around. What file system are you using and what hardware?
cheers
Jamie...
Quoted 33 lines
Dear Linux Admin,
On Linux 2.4 I have had three Kernel Panics recently.
They include the following: journal.o "( ret != 0 )". I see in the source code that there is an assertion:
J_ASSERT(ret != 0)in the function:unsigned long
journal_bmap(journal_t *journal, unsigned long blocknr)Which looks like a possible place for the origin of this.
There is also a large amount of Hex data, which I do not have, unless logged somewhere on my system unknown to me. (I don't get many Panics, not sure where panic data is logged...)
On reboot I loose files. Although nothing serious yet.
The system is a POP3 server, handling about 1,000 email files and about 10,000 email's a day, so there is constantly great disk load by sendmail and the default redhat POP3.
Should I upgrade my kernel, or may I be doing something specific to cause this?
Thanks with any help,
Ben Clewett.
-
To unsubscribe from this list: send the line "unsubscribe linux-admin" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html