[2.5.67 - 2.5.68] Hangs on pcmcia yenta_socket initialisation
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hello,
Kernels 2.5.6[78] hang when the pcmcia yenta_socket is initialised.
The last message I get is this:
Apr 23 06:54:22 laptop kernel: Linux Kernel Card Services 3.1.22 Apr 23 06:54:22 laptop kernel: options: [pci] [cardbus] [pm] Apr 23 06:54:22 laptop kernel: Intel PCIC probe: not found. Apr 23 06:54:22 laptop kernel: PCI: Found IRQ 11 for device 00:03.0 Apr 23 06:54:22 laptop kernel: PCI: Sharing IRQ 11 with 00:03.1 Apr 23 06:54:22 laptop kernel: PCI: Sharing IRQ 11 with 00:07.2 Apr 23 06:54:22 laptop kernel: Yenta IRQ list 0698, PCI irq11 Apr 23 06:54:22 laptop kernel: Socket status: 30000020 Apr 23 06:54:22 laptop kernel: PCI: Found IRQ 11 for device 00:03.1 Apr 23 06:54:22 laptop kernel: PCI: Sharing IRQ 11 with 00:03.0 Apr 23 06:54:22 laptop kernel: PCI: Sharing IRQ 11 with 00:07.2 Apr 23 06:54:22 laptop kernel: Yenta IRQ list 0698, PCI irq11 Apr 23 06:54:23 laptop kernel: Socket status: 30000010
After this, the system becomes unresponsive. Reboot is possible using the SysRq keys.
System information:
System:
Dell Latitude CPx J 650MHz - Pentium 3 650
Distribution:
Debian Unstable (Sid)
Hardware:
00:03.0 CardBus bridge: Texas Instruments PCI1225 (rev 01)
Subsystem: Dell Computer Corporation: Unknown device 00bb
Flags: bus master, medium devsel, latency 168, IRQ 11
Memory at 10000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 10400000-107ff000 (prefetchable)
Memory window 1: 10800000-10bff000
I/O window 0: 00001000-000010ff
I/O window 1: 00001400-000014ff
16-bit legacy interface ports at 000100:03.1 CardBus bridge: Texas Instruments PCI1225 (rev 01)
Subsystem: Dell Computer Corporation: Unknown device 00bb
Flags: bus master, medium devsel, latency 168, IRQ 11
Memory at 10001000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
Memory window 0: 10c00000-10fff000 (prefetchable)
Memory window 1: 11000000-113ff000
I/O window 0: 00001800-000018ff
I/O window 1: 00001c00-00001cff
16-bit legacy interface ports at 0001To reproduce: boot with any 2.5.6[78] kernel with pcmcia as modules, and have it loaded through pcmcia-cs at bootup
It works fine on kernel 2.5.66.
DK
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (GNU/Linux)
iD8DBQE+pijspuyeqyCEh60RAl/7AJwOq6hubHFvffLFVO6RJ+yttCGoZgCfU4zS fOYYQnc7w12OKOe50rx8WuE=
=Wuuf
-----END PGP SIGNATURE-----
Quoted 9 lines · DevilKin
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1Hello,
Kernels 2.5.6[78] hang when the pcmcia
yenta_socketis initialised.The last message I get is this:
Quoted 13 lines
Apr 23 06:54:22 laptop kernel: Linux Kernel Card Services 3.1.22 Apr 23 06:54:22 laptop kernel: options: [pci] [cardbus] [pm] Apr 23 06:54:22 laptop kernel: Intel PCIC probe: not found. Apr 23 06:54:22 laptop kernel: PCI: Found IRQ 11 for device 00:03.0 Apr 23 06:54:22 laptop kernel: PCI: Sharing IRQ 11 with 00:03.1 Apr 23 06:54:22 laptop kernel: PCI: Sharing IRQ 11 with 00:07.2 Apr 23 06:54:22 laptop kernel: Yenta IRQ list 0698, PCI irq11 Apr 23 06:54:22 laptop kernel: Socket status: 30000020 Apr 23 06:54:22 laptop kernel: PCI: Found IRQ 11 for device 00:03.1 Apr 23 06:54:22 laptop kernel: PCI: Sharing IRQ 11 with 00:03.0 Apr 23 06:54:22 laptop kernel: PCI: Sharing IRQ 11 with 00:07.2 Apr 23 06:54:22 laptop kernel: Yenta IRQ list 0698, PCI irq11 Apr 23 06:54:23 laptop kernel: Socket status: 30000010
Download and apply the following:
http://patches.arm.linux.org.uk/pcmcia/pcmcia-1.diff
Also, the -mm kernel series starting with 2.5.67-mm4 do include this patch. You can download -mm patches from ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.5
Signature · 3 lines
Please AVOID sending me WORD, EXCEL or POWERPOINT attachments. See http://www.fsf.org/philosophy/no-word-attachments.html Linux Registered User #287198
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Quoted 7 lines · Felipe Alfaro Solana
Download and apply the following:
http://patches.arm.linux.org.uk/pcmcia/pcmcia-1.diff
Also, the -mm kernel series starting with 2.5.67-mm4 do include this patch. You can download -mm patches from ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.5
This results in the following oops:
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
Intel PCIC probe: not found.
PCI: Found IRQ 11 for device 00:03.0
PCI: Sharing IRQ 11 with 00:03.1
PCI: Sharing IRQ 11 with 00:07.2
Yenta IRQ list 0698, PCI irq11
Socket status: 30000020
PCI: Found IRQ 11 for device 00:03.1
PCI: Sharing IRQ 11 with 00:03.0
PCI: Sharing IRQ 11 with 00:07.2
Yenta IRQ list 0698, PCI irq11
Socket status: 30000010
cs: sock ce519800 old smfunc d116d1a0 mask 0x0000004a pending 0x00000002 sockstate 0x00000000 status 0x00001880 delivering 0x00000002
cs: sock ce519800 new smfunc d116d280 mask 0x00000001 pending 0x00000002 sockstate 0x00000010
cs: sock ce519800 old smfunc d116d280 mask 0x00000001 pending 0x00000003 sockstate 0x00000010 status 0x00001880 delivering 0x00000001
cs: sock ce519800 new smfunc d116d480 mask 0x00000001 pending 0x00000002 sockstate 0x00008018
cs: sock ce519000 old smfunc d116d1a0 mask 0x0000004a pending 0x00000002 sockstate 0x00000000 status 0x000000b0 delivering 0x00000002
cs: sock ce519000 new smfunc d116d280 mask 0x00000001 pending 0x00000002 sockstate 0x00000010
cs: sock ce519000 old smfunc d116d280 mask 0x00000001 pending 0x00000003 sockstate 0x00000010 status 0x000000b0 delivering 0x00000001
cs: sock ce519000 new smfunc d116d480 mask 0x00000001 pending 0x00000002 sockstate 0x00000018
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: excluding 0x800-0x84f 0x868-0x86f
cs: IO port probe 0x0100-0x04ff: excluding 0x280-0x287 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: sock ce519800 old smfunc d116d480 mask 0x00000001 pending 0x00000023 sockstate 0x00008018 status 0x000019c0 delivering 0x00000001
cs: sock ce519800 new smfunc d116d580 mask 0x00000001 pending 0x00000022 sockstate 0x00008018
cs: sock ce519800 old smfunc d116d580 mask 0x00000001 pending 0x00000023 sockstate 0x00008018 status 0x000019c0 delivering 0x00000001
Unable to handle kernel paging request at virtual address d10545c0 printing eip: c01b0368 *pde = 0fb66067 *pte = 00000000 Oops: 0000 [#1] CPU: 0 EIP: 0060:[<c01b0368>] Not tainted EFLAGS: 00010286
EIP is at pci_bus_match+0x18/0xb0
eax: 00000000 ebx: cef4dc00 ecx: d10545c0 edx: 00000000
esi: cef4dc4c edi: ffffffed ebp: c12d284c esp: ce479e74
ds: 007b es: 007b ss: 0068
Process pcmcia/0 (pid: 2203, threadinfo=ce478000 task=ce4df300)
Stack: d109edc8 c01d1abf cef4dc4c d109edc8 d109edf8 cef4dc4c c02d7ff8 c01d1b5f
cef4dc4c d109edc8 cef4dc4c c02d7fa0 cef4dc88 c01d1d24 cef4dc4c c0282ddf
c02de000 cef4dc4c 00000000 cef4dc88 c01d0ef0 cef4dc4c cef4dc00 cffd08b4
Call Trace:
[<d109edc8>] m3_pci_driver+0x28/0xa0 [maestro3]
[<c01d1abf>] bus_match+0x2f/0x80
[<d109edc8>] m3_pci_driver+0x28/0xa0 [maestro3]
[<d109edf8>] m3_pci_driver+0x58/0xa0 [maestro3]
[<c01d1b5f>] device_attach+0x4f/0x90
[<d109edc8>] m3_pci_driver+0x28/0xa0 [maestro3]
[<c01d1d24>] bus_add_device+0x64/0xb0
[<c01d0ef0>] device_add+0xd0/0x110
[<c01aca6b>] pci_bus_add_devices+0x4b/0xb0
[<d1170e2d>] cb_alloc+0xad/0xf0 [pcmcia_core]
[<c011a608>] printk+0x118/0x180
[<d116d6d1>] state_wait_ready+0x151/0x260 [pcmcia_core]
[<d116dbf1>] sm_do_work+0xa1/0xf0 [pcmcia_core]
[<c012867f>] worker_thread+0x1ff/0x2e0
[<d116db50>] sm_do_work+0x0/0xf0 [pcmcia_core]
[<c01168f0>] default_wake_function+0x0/0x20
[<c01091c2>] ret_from_fork+0x6/0x14
[<c01168f0>] default_wake_function+0x0/0x20
[<c0128480>] worker_thread+0x0/0x2e0
[<c01071dd>] kernel_thread_helper+0x5/0x18
Code: 8b 11 85 d2 74 7a 89 f6 83 fa ff 74 2b 0f b7 43 24 39 c2 74 DK
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (GNU/Linux)
iD8DBQE+poz3puyeqyCEh60RAmgoAJ40zorNV1oRGbmy6hngz6LE29T/sACfbiro +tUYPVecqFk8PBWN6njOBDI=
=ubew
-----END PGP SIGNATURE-----
Quoted 94 lines · DevilKin
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1Quoted 7 lines · Felipe Alfaro Solana
Download and apply the following:
http://patches.arm.linux.org.uk/pcmcia/pcmcia-1.diff
Also, the -mm kernel series starting with 2.5.67-mm4 do include this patch. You can download -mm patches from ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.5
This results in the following oops:
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
Intel PCIC probe: not found.
PCI: Found IRQ 11 for device 00:03.0
PCI: Sharing IRQ 11 with 00:03.1
PCI: Sharing IRQ 11 with 00:07.2
Yenta IRQ list 0698, PCI irq11
Socket status: 30000020
PCI: Found IRQ 11 for device 00:03.1
PCI: Sharing IRQ 11 with 00:03.0
PCI: Sharing IRQ 11 with 00:07.2
Yenta IRQ list 0698, PCI irq11
Socket status: 30000010
cs: sockce519800old smfuncd116d1a0mask0x0000004apending0x00000002sockstate0x00000000status0x00001880delivering0x00000002
cs: sockce519800new smfuncd116d280mask0x00000001pending0x00000002sockstate0x00000010
cs: sockce519800old smfuncd116d280mask0x00000001pending0x00000003sockstate0x00000010status0x00001880delivering0x00000001
cs: sockce519800new smfuncd116d480mask0x00000001pending0x00000002sockstate0x00008018
cs: sockce519000old smfuncd116d1a0mask0x0000004apending0x00000002sockstate0x00000000status0x000000b0delivering0x00000002
cs: sockce519000new smfuncd116d280mask0x00000001pending0x00000002sockstate0x00000010
cs: sockce519000old smfuncd116d280mask0x00000001pending0x00000003sockstate0x00000010status0x000000b0delivering0x00000001
cs: sockce519000new smfuncd116d480mask0x00000001pending0x00000002sockstate0x00000018
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: excluding 0x800-0x84f 0x868-0x86f
cs: IO port probe 0x0100-0x04ff: excluding 0x280-0x287 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: sockce519800old smfuncd116d480mask0x00000001pending0x00000023sockstate0x00008018status0x000019c0delivering0x00000001
cs: sockce519800new smfuncd116d580mask0x00000001pending0x00000022sockstate0x00008018
cs: sockce519800old smfuncd116d580mask0x00000001pending0x00000023sockstate0x00008018status0x000019c0delivering0x00000001Unable to handle kernel paging request at virtual address d10545c0 printing eip: c01b0368 *pde = 0fb66067 *pte = 00000000 Oops: 0000 [#1] CPU: 0 EIP: 0060:[<c01b0368>] Not tainted EFLAGS: 00010286EIP is at
pci_bus_match+0x18/0xb0
eax: 00000000 ebx:cef4dc00ecx:d10545c0edx: 00000000
esi:cef4dc4cedi: ffffffed ebp:c12d284cesp:ce479e74
ds: 007b es: 007b ss: 0068
Process pcmcia/0 (pid: 2203, threadinfo=ce478000 task=ce4df300)Stack: d109edc8 c01d1abf cef4dc4c d109edc8 d109edf8 cef4dc4c c02d7ff8 c01d1b5f cef4dc4c d109edc8 cef4dc4c c02d7fa0 cef4dc88 c01d1d24 cef4dc4c c0282ddf c02de000 cef4dc4c 00000000 cef4dc88 c01d0ef0 cef4dc4c cef4dc00 cffd08b4 Call Trace: [<d109edc8>] m3_pci_driver+0x28/0xa0 [maestro3] [<c01d1abf>] bus_match+0x2f/0x80 [<d109edc8>] m3_pci_driver+0x28/0xa0 [maestro3] [<d109edf8>] m3_pci_driver+0x58/0xa0 [maestro3] [<c01d1b5f>] device_attach+0x4f/0x90 [<d109edc8>] m3_pci_driver+0x28/0xa0 [maestro3] [<c01d1d24>] bus_add_device+0x64/0xb0 [<c01d0ef0>] device_add+0xd0/0x110 [<c01aca6b>] pci_bus_add_devices+0x4b/0xb0 [<d1170e2d>] cb_alloc+0xad/0xf0 [pcmcia_core] [<c011a608>] printk+0x118/0x180 [<d116d6d1>] state_wait_ready+0x151/0x260 [pcmcia_core] [<d116dbf1>] sm_do_work+0xa1/0xf0 [pcmcia_core] [<c012867f>] worker_thread+0x1ff/0x2e0 [<d116db50>] sm_do_work+0x0/0xf0 [pcmcia_core] [<c01168f0>] default_wake_function+0x0/0x20 [<c01091c2>] ret_from_fork+0x6/0x14 [<c01168f0>] default_wake_function+0x0/0x20 [<c0128480>] worker_thread+0x0/0x2e0 [<c01071dd>] kernel_thread_helper+0x5/0x18 Code: 8b 11 85 d2 74 7a 89 f6 83 fa ff 74 2b 0f b7 43 24 39 c2 74
Quoted 8 lines
DK
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (GNU/Linux)iD8DBQE+poz3puyeqyCEh60RAmgoAJ40zorNV1oRGbmy6hngz6LE29T/sACfbiro +tUYPVecqFk8PBWN6njOBDI=
=ubew
-----END PGP SIGNATURE-----
Could you please try again with this individual and newer PCMCIA patch at http://patches.arm.linux.org.uk/pcmcia-20030421.diff? If you prefer, you can also try with 2.5.68-mm2 which includes the mentioned patch.
Signature · 3 lines
Please AVOID sending me WORD, EXCEL or POWERPOINT attachments. See http://www.fsf.org/philosophy/no-word-attachments.html Linux Registered User #287198
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Quoted 3 lines · Felipe Alfaro Solana
Could you please try again with this individual and newer PCMCIA patch at http://patches.arm.linux.org.uk/pcmcia-20030421.diff? If you prefer, you can also try with 2.5.68-mm2 which includes the mentioned patch.
Tried the patch against vanilla 2.5.68, gives me this oops:
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
Intel PCIC probe: not found.
PCI: Found IRQ 11 for device 00:03.0
PCI: Sharing IRQ 11 with 00:03.1
PCI: Sharing IRQ 11 with 00:07.2
Yenta IRQ list 0698, PCI irq11
Socket status: 30000020
PCI: Found IRQ 11 for device 00:03.1
PCI: Sharing IRQ 11 with 00:03.0
PCI: Sharing IRQ 11 with 00:07.2
Yenta IRQ list 0698, PCI irq11
Socket status: 30000010
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: excluding 0x800-0x84f 0x868-0x86f
cs: IO port probe 0x0100-0x04ff: excluding 0x280-0x287 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
Unable to handle kernel paging request at virtual address d10545c0 printing eip: c01b0368 *pde = 0fb66067 *pte = 00000000 Oops: 0000 [#1] CPU: 0 EIP: 0060:[<c01b0368>] Not tainted EFLAGS: 00010286
EIP is at pci_bus_match+0x18/0xb0
eax: 00000000 ebx: cf2a8800 ecx: d10545c0 edx: 00000000
esi: cf2a884c edi: ffffffed ebp: c12d284c esp: ce591e88
ds: 007b es: 007b ss: 0068
Process pcmcia/0 (pid: 388, threadinfo=ce590000 task=ce6f7300)
Stack: d109edc8 c01d1abf cf2a884c d109edc8 d109edf8 cf2a884c c02d7ff8 c01d1b5f
cf2a884c d109edc8 cf2a884c c02d7fa0 cf2a8888 c01d1d24 cf2a884c c0282ddf
c02de000 cf2a884c 00000000 cf2a8888 c01d0ef0 cf2a884c cf2a8800 cffd08b4
Call Trace:
[<d109edc8>] m3_pci_driver+0x28/0xa0 [maestro3]
[<c01d1abf>] bus_match+0x2f/0x80
[<d109edc8>] m3_pci_driver+0x28/0xa0 [maestro3]
[<d109edf8>] m3_pci_driver+0x58/0xa0 [maestro3]
[<c01d1b5f>] device_attach+0x4f/0x90
[<d109edc8>] m3_pci_driver+0x28/0xa0 [maestro3]
[<c01d1d24>] bus_add_device+0x64/0xb0
[<c01d0ef0>] device_add+0xd0/0x110
[<c01aca6b>] pci_bus_add_devices+0x4b/0xb0
[<d116fdad>] cb_alloc+0xad/0xf0 [pcmcia_core]
[<d115a17e>] pci_set_socket+0x3e/0x40 [yenta_socket]
[<d115d140>] +0x0/0x5a0 [yenta_socket]
[<d116c6d1>] state_wait_ready+0x151/0x260 [pcmcia_core]
[<d116b9fa>] get_socket_status+0x1a/0x20 [pcmcia_core]
[<d116cbae>] sm_do_work+0x5e/0x70 [pcmcia_core]
[<c012867f>] worker_thread+0x1ff/0x2e0
[<d116cb50>] sm_do_work+0x0/0x70 [pcmcia_core]
[<c01168f0>] default_wake_function+0x0/0x20
[<c01091c2>] ret_from_fork+0x6/0x14
[<c01168f0>] default_wake_function+0x0/0x20
[<c0128480>] worker_thread+0x0/0x2e0
[<c01071dd>] kernel_thread_helper+0x5/0x18
Code: 8b 11 85 d2 74 7a 89 f6 83 fa ff 74 2b 0f b7 43 24 39 c2 74 DK
- --
San Francisco isn't what it used to be, and it never was.
-- Herb Caen
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (GNU/Linux)
iD8DBQE+puCBpuyeqyCEh60RAoj+AJ97jlGV25k0tMzJFx7SIhRmhVjyKgCeMBRr 1QyJMJciTYIcNm6odgu+CZk=
=HVXA
-----END PGP SIGNATURE-----
Quoted 14 lines · DevilKin-LKML
Unable to handle kernel paging request at virtual address d10545c0 printing eip: c01b0368 *pde = 0fb66067 *pte = 00000000 Oops: 0000 [#1] CPU: 0 EIP: 0060:[<c01b0368>] Not tainted EFLAGS: 00010286EIP is at
pci_bus_match+0x18/0xb0
eax: 00000000 ebx:cf2a8800ecx:d10545c0edx: 00000000
esi:cf2a884cedi: ffffffed ebp:c12d284cesp:ce591e88
ds: 007b es: 007b ss: 0068
Process pcmcia/0 (pid: 388, threadinfo=ce590000 task=ce6f7300)
Quoted 10 lines
Stack: d109edc8 c01d1abf cf2a884c d109edc8 d109edf8 cf2a884c c02d7ff8 c01d1b5f
cf2a884c d109edc8 cf2a884c c02d7fa0 cf2a8888 c01d1d24 cf2a884c c0282ddf
c02de000 cf2a884c 00000000 cf2a8888 c01d0ef0 cf2a884c cf2a8800 cffd08b4
Call Trace:
[<d109edc8>] m3_pci_driver+0x28/0xa0 [maestro3]
[<c01d1abf>] bus_match+0x2f/0x80
[<d109edc8>] m3_pci_driver+0x28/0xa0 [maestro3]
[<d109edf8>] m3_pci_driver+0x58/0xa0 [maestro3]
[<c01d1b5f>] device_attach+0x4f/0x90
[<d109edc8>] m3_pci_driver+0x28/0xa0 [maestro3]I don't think this is PCMCIA related - something else is going on here.
My guess is we're trying to locate a driver for the card, and we get to maestro3. This works as expected, but the next driver on the chain seems to be a module which was may have been removed but which left its pci_driver structure behind (at 0xd10545c0.)
Decoding the attached x86 opcodes didn't reveal anything interesting to me.
Anyone else?
Signature · 2 lines
Russell King ([email protected]) The developer of ARM Linux http://www.arm.linux.org.uk/personal/aboutme.html
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Quoted 26 lines · Russell King
Quoted 14 lines · DevilKin-LKML
Unable to handle kernel paging request at virtual address d10545c0 printing eip: c01b0368 *pde = 0fb66067 *pte = 00000000 Oops: 0000 [#1] CPU: 0 EIP: 0060:[<c01b0368>] Not tainted EFLAGS: 00010286EIP is at
pci_bus_match+0x18/0xb0
eax: 00000000 ebx:cf2a8800ecx:d10545c0edx: 00000000
esi:cf2a884cedi: ffffffed ebp:c12d284cesp:ce591e88
ds: 007b es: 007b ss: 0068
Process pcmcia/0 (pid: 388, threadinfo=ce590000 task=ce6f7300)Quoted 10 lines
Stack: d109edc8 c01d1abf cf2a884c d109edc8 d109edf8 cf2a884c c02d7ff8 c01d1b5f cf2a884c d109edc8 cf2a884c c02d7fa0 cf2a8888 c01d1d24 cf2a884c c0282ddf c02de000 cf2a884c 00000000 cf2a8888 c01d0ef0 cf2a884c cf2a8800 cffd08b4 Call Trace: [<d109edc8>] m3_pci_driver+0x28/0xa0 [maestro3] [<c01d1abf>] bus_match+0x2f/0x80 [<d109edc8>] m3_pci_driver+0x28/0xa0 [maestro3] [<d109edf8>] m3_pci_driver+0x58/0xa0 [maestro3] [<c01d1b5f>] device_attach+0x4f/0x90 [<d109edc8>] m3_pci_driver+0x28/0xa0 [maestro3]
Quoted 6 lines
I don't think this is PCMCIA related - something else is going on here.
My guess is we're trying to locate a driver for the card, and we get to maestro3. This works as expected, but the next driver on the chain seems to be a module which was may have been removed but which left its
pci_driverstructure behind (at0xd10545c0.)
I have a Maestro3 in the laptop (which is also why the module is loaded), but I never unload it once it's loaded at bootup...
Anything else I can try?
Jan
- --
To be sure of hitting the target, shoot first and, whatever you hit, call it the target.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (GNU/Linux)
iD8DBQE+p5TlpuyeqyCEh60RAuAuAJ9WByWWm+pwMNT3HrarHxiW/6HfKACeMOPZ 2d2+dnUbdZhDG2A3vfVNHoI=
=rw/c
-----END PGP SIGNATURE-----
Quoted 4 lines · DevilKin-LKML
I have a Maestro3 in the laptop (which is also why the module is loaded), but I never unload it once it's loaded at bootup...
Anything else I can try?
Maybe looking in /sysfs/bus/pci/drivers before inserting the card (this may cause an oops as well - if so, it confirms my suspicion.)
Signature · 2 lines
Russell King ([email protected]) The developer of ARM Linux http://www.arm.linux.org.uk/personal/aboutme.html
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Quoted 8 lines · Russell King
Quoted 4 lines · DevilKin-LKML
I have a Maestro3 in the laptop (which is also why the module is loaded), but I never unload it once it's loaded at bootup...
Anything else I can try?
Maybe looking in /sysfs/bus/pci/drivers before inserting the card (this may cause an oops as well - if so, it confirms my suspicion.)
Uh... The Maestro3 is integrated on the motherboard, so that's kinda hard.
I have 1 pcmcia card and 1 cardbus card in the system (see below). I have tested the booting with no cards, than it boots fine. Booting with only the pcmcia card also works fine, so It's really the cardbus card that seems to throw the system into an unstable state.
laptop:/home/devilkin# cardctl ident Socket 0: product info: "3Com Corporation", "3CCFE575BT", "LAN Cardbus Card", "001" manfid: 0x0101, 0x5157 function: 6 (network) Socket 1: product info: "Psion Dacom", "Gold Card Global 56K+Fax", "56K+Fax", "V8.25" manfid: 0x016c, 0x0005 function: 2 (serial)
Jan
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (GNU/Linux)
iD8DBQE+p7cvpuyeqyCEh60RAtLVAJwOVfwwZ0RyTG5UwqprhYK2yibtlgCfbWRP v0glplXaF6gJbQ+83/bqS/k=
=Au0c
-----END PGP SIGNATURE-----
Quoted 8 lines · DevilKin
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1Quoted 2 lines · Russell King
Maybe looking in /sysfs/bus/pci/drivers before inserting the card (this may cause an oops as well - if so, it confirms my suspicion.)
Uh... The Maestro3 is integrated on the motherboard, so that's kinda hard.
Sorry, I meant booting without the cardbus card inserted, then looking at /sysfs/bus/pci/drivers.
Signature · 2 lines
Russell King ([email protected]) The developer of ARM Linux http://www.arm.linux.org.uk/personal/aboutme.html
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Quoted 5 lines · Russell King
Quoted 4 lines · DevilKin
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1On Thursday 24 April 2003 09:57, Russell King wrote:
Quoted 8 lines
Quoted 5 lines
Quoted 2 lines
Maybe looking in /sysfs/bus/pci/drivers before inserting the card (this may cause an oops as well - if so, it confirms my suspicion.)
Uh... The Maestro3 is integrated on the motherboard, so that's kinda hard.
Sorry, I meant booting without the cardbus card inserted, then looking at /sysfs/bus/pci/drivers.
devilkin@laptop:~$ tree /sys/bus/pci/drivers/
/sys/bus/pci/drivers/
|-- PIIX IDE
| `-- 00:07.1 -> ../../../../devices/pci0/00:07.1
|-- cardbus
| |-- 00:03.0 -> ../../../../devices/pci0/00:03.0
| `-- 00:03.1 -> ../../../../devices/pci0/00:03.1
|-- ess_m3_audio
| `-- 00:08.0 -> ../../../../devices/pci0/00:08.0
|-- parport_pc
|-- serial
`-- uhci-hcd
`-- 00:07.2 -> ../../../../devices/pci0/00:07.2Jan
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (GNU/Linux)
iD8DBQE+p7l1puyeqyCEh60RAkK0AJ48w7l9nl93DpKbQAldI7Q1nsMfkgCghNiP IzwpmcKOxgGytMG+OQP20RI=
=SnTJ
-----END PGP SIGNATURE-----
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Quoted 7 lines · DevilKin
Uh... The Maestro3 is integrated on the motherboard, so that's kinda hard.
I have 1 pcmcia card and 1 cardbus card in the system (see below). I have tested the booting with no cards, than it boots fine. Booting with only the pcmcia card also works fine, so It's really the cardbus card that seems to throw the system into an unstable state.
Forgot to mention that inserting the cardbus card afterwards and modprobe'ing the module then (3c59x) works ok too. Its only during the detection that something seems to go wrong.
Jan
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (GNU/Linux)
iD8DBQE+p7i+puyeqyCEh60RAvpqAJ4nT5C26gAzEKmp18wqArh7cIjf4gCeP116 mir+3C9x7idsfJpnbDdrDpI=
=5vOg
-----END PGP SIGNATURE-----
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Just reporting that this now works fine under 2.5.69. Whatever the problem, it's definitely gone now.
DK
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (GNU/Linux)
iD8DBQE+tiX5puyeqyCEh60RAvk1AJ9Qvygxk+70PFSKSSLKTgUi2mWmJwCaAjf0 5AR6Cz0LF6fC9g6Nd5t2eP8=
=o4WM
-----END PGP SIGNATURE-----
Was this one you reported - I didn't see this one.
I still get a hang on any 2.5.50+ kernel when I load yenta and have ACPI turned on. It locks solid about three seconds after loading the module
Quoted 4 lines
Just reporting that this now works fine under 2.5.69. Whatever the problem, it's definitely gone now.
Signature · 3 lines
Matthew Harrell Preserve wildlife -- Bit Twiddlers, Inc. pickle a squirrel today! [email protected]
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Quoted 1 line · Matthew Harrell
Was this one you reported - I didn't see this one.
It was the fact that when I booted my system with my 3com cardbus NIC inserted in the slot it would oops, giving me a non-working pcmcia/cardbus system.
Booting without the card worked fine, and inserting the card afterwards also worked great.
thread is here:
http://marc.theaimsgroup.com/?l=linux-kernel&m=105107713129722&w=2
Quoted 4 lines
I still get a hang on any 2.5.50+ kernel when I load yenta and have ACPI turned on. It locks solid about three seconds after loading the module
Ah. I don't use ACPI, because well... it caused me more pain than it helped me in the past, in both OS' on my system (being Linux and win2k)
Jan
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (GNU/Linux)
iD8DBQE+uJdQpuyeqyCEh60RAv/oAKCAUsots5uqvrL0O3dsrBGVXJ9icwCfQS/c H6BRfG+uFkYWWsFQL8SJsSs=
=cGpw
-----END PGP SIGNATURE-----
Quoted 61 lines · DevilKin-LKML
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1Quoted 3 lines · Felipe Alfaro Solana
Could you please try again with this individual and newer PCMCIA patch at http://patches.arm.linux.org.uk/pcmcia-20030421.diff? If you prefer, you can also try with 2.5.68-mm2 which includes the mentioned patch.
Tried the patch against vanilla 2.5.68, gives me this oops
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
Intel PCIC probe: not found.
PCI: Found IRQ 11 for device 00:03.0
PCI: Sharing IRQ 11 with 00:03.1
PCI: Sharing IRQ 11 with 00:07.2
Yenta IRQ list 0698, PCI irq11
Socket status: 30000020
PCI: Found IRQ 11 for device 00:03.1
PCI: Sharing IRQ 11 with 00:03.0
PCI: Sharing IRQ 11 with 00:07.2
Yenta IRQ list 0698, PCI irq11
Socket status: 30000010
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: excluding 0x800-0x84f 0x868-0x86f
cs: IO port probe 0x0100-0x04ff: excluding 0x280-0x287 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.Unable to handle kernel paging request at virtual address d10545c0 printing eip: c01b0368 *pde = 0fb66067 *pte = 00000000 Oops: 0000 [#1] CPU: 0 EIP: 0060:[<c01b0368>] Not tainted EFLAGS: 00010286EIP is at
pci_bus_match+0x18/0xb0
eax: 00000000 ebx:cf2a8800ecx:d10545c0edx: 00000000
esi:cf2a884cedi: ffffffed ebp:c12d284cesp:ce591e88
ds: 007b es: 007b ss: 0068
Process pcmcia/0 (pid: 388, threadinfo=ce590000 task=ce6f7300)Stack: d109edc8 c01d1abf cf2a884c d109edc8 d109edf8 cf2a884c c02d7ff8 c01d1b5f cf2a884c d109edc8 cf2a884c c02d7fa0 cf2a8888 c01d1d24 cf2a884c c0282ddf c02de000 cf2a884c 00000000 cf2a8888 c01d0ef0 cf2a884c cf2a8800 cffd08b4 Call Trace: [<d109edc8>] m3_pci_driver+0x28/0xa0 [maestro3] [<c01d1abf>] bus_match+0x2f/0x80 [<d109edc8>] m3_pci_driver+0x28/0xa0 [maestro3] [<d109edf8>] m3_pci_driver+0x58/0xa0 [maestro3] [<c01d1b5f>] device_attach+0x4f/0x90 [<d109edc8>] m3_pci_driver+0x28/0xa0 [maestro3] [<c01d1d24>] bus_add_device+0x64/0xb0 [<c01d0ef0>] device_add+0xd0/0x110 [<c01aca6b>] pci_bus_add_devices+0x4b/0xb0 [<d116fdad>] cb_alloc+0xad/0xf0 [pcmcia_core] [<d115a17e>] pci_set_socket+0x3e/0x40 [yenta_socket] [<d115d140>] +0x0/0x5a0 [yenta_socket] [<d116c6d1>] state_wait_ready+0x151/0x260 [pcmcia_core] [<d116b9fa>] get_socket_status+0x1a/0x20 [pcmcia_core] [<d116cbae>] sm_do_work+0x5e/0x70 [pcmcia_core] [<c012867f>] worker_thread+0x1ff/0x2e0
Quoted 9 lines
[<d116cb50>] sm_do_work+0x0/0x70 [pcmcia_core] [<c01168f0>] default_wake_function+0x0/0x20 [<c01091c2>] ret_from_fork+0x6/0x14 [<c01168f0>] default_wake_function+0x0/0x20 [<c0128480>] worker_thread+0x0/0x2e0 [<c01071dd>] kernel_thread_helper+0x5/0x18 Code: 8b 11 85 d2 74 7a 89 f6 83 fa ff 74 2b 0f b7 43 24 39 c2 74
Don't know what the device "M3" is. This falls out of my knowledge... Russell, Andrew, someone?
Signature · 3 lines
Please AVOID sending me WORD, EXCEL or POWERPOINT attachments. See http://www.fsf.org/philosophy/no-word-attachments.html Linux Registered User #287198