ALi M5451/Trident sound module -> video corruption

DISCUSSION David Caplan 2 participants 3 messages May 14, 2003

Share & tools

David Caplan

author

2003-05-14 03:59 UTC #0 lore raw

Hello,

I have a Sharp Actius MM10 "sub-notebook", on which I'm running kernel 2.4.21-rc1.
When I load the trident.o sound module, the lcd begins flashing blue stripes continuously. I am not up to date on the current issues with this driver, am I doing something wrong? could there be some sort of hardware
conflict? or is it a kernel problem?

I have included the output of lspci...
Please CC me any responses.

Thanks,
-David

-lspci--output
00:00.0 Host bridge: Transmeta Corporation LongRun Northbridge (rev 03)
00:00.1 RAM memory: Transmeta Corporation SDRAM controller
00:00.2 RAM memory: Transmeta Corporation BIOS scratchpad
00:05.0 CardBus bridge: Ricoh Co Ltd RL5c475 (rev 81)
00:06.0 Multimedia audio controller: ALi
Corporation M5451 PCI AC-Link Controller Audio Device (rev 02)
00:07.0 ISA bridge: ALi Corporation M1533 PCI to ISA Bridge [Aladdin IV] 00:09.0 VGA compatible controller: Silicon Motion, Inc. SM720 Lynx3DM (rev c1) 00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ 00:0b.0 Network controller: Harris Semiconductor Prism 2.5
Wavelan chipset (rev 01)
00:0c.0 USB Controller: NEC Corporation USB
00:0c.1 USB Controller: NEC Corporation USB (rev 41)
00:0c.2 USB Controller: NEC Corporation USB 2.0 (rev 02)
00:10.0 IDE interface: ALi Corporation M5229 IDE (rev c4)
00:11.0 Bridge: ALi Corporation M7101 PMU

Signature · 3 lines

--
David Caplan {[email protected]|[email protected]}
gpg fingerprint:: B586 07D3 6EC0 EB36 6866  18C8 79B3 3A94 5898 39A0

Muli Ben-Yehuda

2003-05-14 04:30 UTC #1 lore raw

Quoted 9 lines · David Caplan

Hello,
I have a Sharp Actius MM10 "sub-notebook", on which I'm running kernel 2.4.21-rc1.
When I load the trident.o sound module, the lcd begins flashing blue stripes continuously. I am not up to date on the current issues with this driver, am I doing something wrong? could there be some sort of hardware
conflict? or is it a kernel problem?

There aren't any outstanding issues that I know of, the driver has been stable for a long time. Could you send the output of lspci -vvv? Also, could you try it with trident built into the kernel?

Thanks,
Muli.

Signature · 2 lines

Muli Ben-Yehuda
http://www.mulix.org

David Caplan

author

2003-05-14 10:54 UTC #2 lore raw

When I build it into the kernel it does the same thing, except on boot up :/
When I tried using the alsa drivers (last night) the exact same thing happend, I think it may be a hardware/memory conflict between the sound card and the video, but I'm not sure.

-David

Quoted 11 lines · * Muli Ben-Yehuda ([email protected]) wrote:

Quoted 9 lines · David Caplan
Hello,
I have a Sharp Actius MM10 "sub-notebook", on which I'm running kernel 2.4.21-rc1.
When I load the trident.o sound module, the lcd begins flashing blue stripes continuously. I am not up to date on the current issues with this driver, am I doing something wrong? could there be some sort of hardware
conflict? or is it a kernel problem?

Quoted 10 lines

There aren't any outstanding issues that I know of, the driver has been stable for a long time. Could you send the output of lspci -vvv? Also, could you try it with trident built into the kernel?
Thanks,
Muli.
Signature · 2 lines
Muli Ben-Yehuda
http://www.mulix.org

--
David Caplan {[email protected]|[email protected]} gpg fingerprint:: B586 07D3 6EC0 EB36 6866 18C8 79B3 3A94 5898 39A0

00:00.0 Host bridge: Transmeta Corporation LongRun Northbridge (rev 03)
Subsystem: Sharp corporation: Unknown device 102b
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 64
Region 0: Memory at f4000000 (32-bit, non-prefetchable) [size=1M]

00:00.1 RAM memory: Transmeta Corporation SDRAM controller
Subsystem: Sharp corporation: Unknown device 102b
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:00.2 RAM memory: Transmeta Corporation BIOS scratchpad
Subsystem: Sharp corporation: Unknown device 102b
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:05.0 CardBus bridge: Ricoh Co Ltd RL5c475 (rev 81)

	Subsystem: Sharp corporation: Unknown device 102b
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 168
	Interrupt: pin A routed to IRQ 9
	Region 0: Memory at 10000000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=00, secondary=01, subordinate=04, sec-latency=176
	Memory window 0: 10400000-107ff000 (prefetchable)
	Memory window 1: 10800000-10bff000
	I/O window 0: 00004000-000040ff
	I/O window 1: 00004400-000044ff
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
	16-bit legacy interface ports at 0001

00:06.0 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link Controller Audio Device (rev 02)
Subsystem: Sharp corporation: Unknown device 102b
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR+ <PERR+
Latency: 64 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 0
Region 0: I/O ports at 1400 [size=256]
Region 1: Memory at f4100000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:07.0 ISA bridge: ALi Corporation M1533 PCI to ISA Bridge [Aladdin IV]
Subsystem: Sharp corporation: Unknown device 102b
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [a0] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:09.0 VGA compatible controller: Silicon Motion, Inc. SM720 Lynx3DM (rev c1) (prog-if 00 [VGA])
Subsystem: Sharp corporation: Unknown device 102b
Control: I/O+ Mem+ BusMaster- SpecCycle+ MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 10
Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: [40] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] AGP version 2.0
Status: RQ=1 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=<none>
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>

00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Sharp corporation: Unknown device 102b
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at 1800 [size=256]
Region 1: Memory at f4101000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0b.0 Network controller: Harris Semiconductor Prism 2.5 Wavelan chipset (rev 01)
Subsystem: AMBIT Microsystem Corp.: Unknown device 0200
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 5
Region 0: Memory at f4104000 (32-bit, prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0c.0 USB Controller: NEC Corporation USB (rev 41) (prog-if 10 [OHCI])
Subsystem: Sharp corporation: Unknown device 102b
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (250ns min, 10500ns max), cache line size 08
Interrupt: pin A routed to IRQ 7
Region 0: Memory at 000da000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0c.1 USB Controller: NEC Corporation USB (rev 41) (prog-if 10 [OHCI])
Subsystem: Sharp corporation: Unknown device 102b
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (250ns min, 10500ns max), cache line size 08
Interrupt: pin B routed to IRQ 7
Region 0: Memory at 000db000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0c.2 USB Controller: NEC Corporation USB 2.0 (rev 02) (prog-if 20 [EHCI])
Subsystem: Sharp corporation: Unknown device 102b
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 132 (4000ns min, 8500ns max), cache line size 08
Interrupt: pin C routed to IRQ 11
Region 0: Memory at f4101400 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:10.0 IDE interface: ALi Corporation M5229 IDE (rev c4) (prog-if ea)
Subsystem: Sharp corporation: Unknown device 102b
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 1000ns max)
Interrupt: pin A routed to IRQ 0
Region 4: I/O ports at 1000 [size=16]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:11.0 Bridge: ALi Corporation M7101 PMU
Subsystem: Sharp corporation: Unknown device 102b
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-