Skip to contentSkip to conversation

ALC650 + Mic input not working

DISCUSSION p z oooo 2 participants 2 messages May 19, 2003 – May 20, 2003

lore
Share & tools
lore

p z oooo

author
#0 lore raw

Sorry, here it is, but this is only half solution.

Peter Zubaj

====================== REKLAMA ================================= Získajte supervýhodné ADSL e¹te výhodnej¹ie. Ceny u¾ od 399 Sk mesaène bez DPH. By» rýchly sa naozaj oplatí. http://www.slovanet.sk/menu/adsl.html

ac97_patch.c renamed from ac97_patch.c.old +7 -0
@@ -374,6 +374,13 @@
 	val &= ~0xc000; /* slot: 3,4,7,8,6,9 */
 	snd_ac97_write_cache(ac97, AC97_ALC650_MULTICH, val);
 
+	val = snd_ac97_read(ac97, 0x76);
+	val = val | 1;
+	snd_ac97_write_cache(ac97, 0x76, val);
+	val = snd_ac97_read(ac97, 0x78);
+	val = val | 0x100;
+	snd_ac97_write_cache(ac97, 0x78, val);
+
 	/* full DAC volume */
 	snd_ac97_write_cache(ac97, AC97_ALC650_SURR_DAC_VOL, 0x0808);
 	snd_ac97_write_cache(ac97, AC97_ALC650_LFE_DAC_VOL, 0x0808);
#1 lore raw

At Mon, 19 May 2003 11:59:28 +0200,

Quoted 3 lines · p z oooo

[1 <text/plain; US-ASCII (quoted-printable)>] Sorry, here it is, but this is only half solution.

i added an experimental code for ALC650 to detect the reveion E and initializes GPIO0 according to the Mic/Center switch. it's now on cvs. could you check whether it works for you?

Takashi

-------------------------------------------------------
This SF.net email is sponsored by: ObjectStore.
If flattening out C++ or Java code to make your application fit in a relational database is painful, don't do it! Check out ObjectStore. Now part of Progress Software. http://www.objectstore.net/sourceforge