Skip to contentSkip to conversation

Changing BIOS IRQs and I/O addresses

DISCUSSION Matt Flax 3 participants 3 messages May 28, 2003

lore
Share & tools
lore

Matt Flax

author
#0 lore raw

Hello,

I have traced my problem with my sound card to the function 'request_irq' in the intel8x0 module.

Unfortunatly the IRQ is set up by the BIOS to be 0. This bios does not let the user alter the IRQs.

Can anyone tell me how to change the IRQ manually ?

Here is some extended info about the card :
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS7012 PCI Audio Accelerator (rev a0)
Subsystem: CLEVO/KAPOK Computer: Unknown device 0400
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 0
Region 0: I/O ports at 1c00 [disabled] [size=256] Region 1: I/O ports at 1800 [disabled] [size=128]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

thanks
Matt

Signature · 13 lines
http://mffm.ee.unsw.edu.au

WSOLA TimeScale Audio Mod  : http://mffmtimescale.sourceforge.net/
FFTw C++                   : http://mffmfftwrapper.sourceforge.net/
Vector Bass                : http://mffmvectorbass.sourceforge.net/
Multimedia Time Code       : http://mffmtimecode.sourceforge.net/


-------------------------------------------------------
This SF.net email is sponsored by: ObjectStore.
If flattening out C++ or Java code to make your application fit in a
relational database is painful, don't do it! Check out ObjectStore.
Now part of Progress Software. http://www.objectstore.net/sourceforge
#1 lore raw
Quoted 2 lines · Matt Flax

Unfortunatly the IRQ is set up by the BIOS to be 0. This bios does not let the user alter the IRQs.

Usually, the BIOS has an option "PnP OS" or maybe "ACPI OS" to specify whether the resources are to be allocated by the BIOS or by the OS.

If your BIOS doesn't support this, you have to configure the Linux kernel to allocate the resources. I don't know if or how this is possible.

HTH
Clemens

-------------------------------------------------------
This SF.net email is sponsored by: ObjectStore.
If flattening out C++ or Java code to make your application fit in a relational database is painful, don't do it! Check out ObjectStore. Now part of Progress Software. http://www.objectstore.net/sourceforge

#2 lore raw
In reply to Matt Flax

If you can't set the IRQ in the BIOS the only way that I know of to change it is to change the PCI slot. That is how I got mine set.

Jan

Quoted 26 lines · Matt Flax

Hello,

I have traced my problem with my sound card to the function 'request_irq' in the intel8x0 module.

Unfortunatly the IRQ is set up by the BIOS to be 0. This bios does not let the user alter the IRQs.

Can anyone tell me how to change the IRQ manually ?

Here is some extended info about the card :
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS7012 PCI Audio Accelerator (rev a0)
Subsystem: CLEVO/KAPOK Computer: Unknown device 0400
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 0
Region 0: I/O ports at 1c00 [disabled] [size=256] Region 1: I/O ports at 1800 [disabled] [size=128]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

Quoted 20 lines

thanks
Matt

Signature · 17 lines
http://mffm.ee.unsw.edu.au

WSOLA TimeScale Audio Mod  : http://mffmtimescale.sourceforge.net/
FFTw C++                   : http://mffmfftwrapper.sourceforge.net/
Vector Bass                : http://mffmvectorbass.sourceforge.net/
Multimedia Time Code       : http://mffmtimecode.sourceforge.net/


-------------------------------------------------------
This SF.net email is sponsored by: ObjectStore.
If flattening out C++ or Java code to make your application fit in a
relational database is painful, don't do it! Check out ObjectStore.
Now part of Progress Software. http://www.objectstore.net/sourceforge
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel

-------------------------------------------------------
This SF.net email is sponsored by: eBay
Get office equipment for less on eBay!
http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5