Microstar MS-6163 blacklist

In other news, I noticed recently that the IO-APIC on my MS-6163 BX-Master was being disabled at boot by the kernel, due to a recently introduced blacklist:

{ apm_kills_local_apic, "Microstar 6163",

	{ MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"),
	  MATCH(DMI_BOARD_NAME, "MS-6163"),
	  NO_MATCH, NO_MATCH } },

Consulting mailing list archives indicated that there is some sort of problem with the IO-APIC on the MS-6163 Pro and APM events. However, this seems a rather clumsy fix to the problem, since it disabled the IO-APIC on _all_ MS-6163 boards rather than just the Pro, and also regardless of whether APM support is even enabled (I don't enable it and don't use it at all).

The DMI string for my board is:
Board Information Block

	Vendor: MICRO-STAR INTERNATIONAL CO., LTD
	Product: MS-6163 (i440BX)
	Version: 3.X
	Serial Number:

It would seem that if a closer match were performed, using the version number of the board (3.X in my case, likely 2.X in the case of the broken Pro), it would be a better idea. Perhaps another alternative solution would be to only disable the IO-APIC if CONFIG_APM is defined. (?)

Thoughts?

Ryan Underwood, <nemesis at icequake.net>, icq=10317253

Its more likely to be about BIOS version than about the board itself

It would have been nice if the original submitter of the patch would have specified what bios they were using. IO-APIC support on my board seemed to be working nicely until eventually it got disabled. :)

I am using the 5.6 bios from their site for the BX Master -- the 6163 Pro (v2) has a totally different BIOS versions and I'm not sure if a blanket black-list for this board would be the best idea.

Thanks,

Ryan Underwood, <nemesis at icequake.net>, icq=10317253