Skip to contentSkip to conversation

ES18xx and IRQ problem

DISCUSSION Tyson Whitehead 1 participant 1 message Jun 24, 2003

lore
Share & tools
lore
#0 lore raw

The latest version of alsa-driver (0.9.4) seems to have an IRQ problem on the DEC version of the ES1888. Any PCM stuff I tried to play would just result in endless looping of the first bit of sound.

Checking /proc/interrupts and revealed that the interrupt counter for the ES1888 would go to 4 upon loading the snd-es18xx module, and then remain there.

Browsing through the source (es18xx.c), I discovered that, in the snd_es18xx_interrupt routine, some alternative interrupt source determination code (in the case of the chip not having a control port -- the only two of which seem to be the ES1887 and ES1888) was '#if 0'ed out.

I re-enabled this code (and disabling the snd_es18xx_mixer_read source based code) and the driver now works fine on my Alpha box.

Maybe someone more knowledgable then me could make some comment of relevance here?

Later -T

PS: Very clean code layout in the alsa drivers guys and gals (or at least the es18xx driver -- I haven't looked at the rest *grin*). I'm impressed. Great job!

PPS: The alternative code seems to handle the mixer as well (or, at least, I can still change my mixer settings and hear the results). :-)

Signature · 4 lines
 Tyson Whitehead  ([email protected] -- WSC-)
 Computer Engineer                        Dept. of Applied Mathematics,
 Graduate Student- Applied Mathematics    University of Western Ontario,
 GnuPG Key ID# 0x8A2AB5D8                 London, Ontario, Canada