Skip to contentSkip to conversation

overclocking?

DISCUSSION Rees Boffey 2 participants 2 messages Jun 29, 2003

lore
Share & tools
lore
#0 lore raw

in the cpufreq documenatation in my 2.4.21-benh kernel it mentions that arguments echoed to the /proc/cpufreq entry are first validated before any changes are made. my question is, is it possible to remove this validation to allow the overclocking of the cpu? the ibook2.2 that i use is possible of being overclocked via software using an early version of the CHUD tools for osx but as of yet i have not found a way to do it under linux.
appreciate any replies/flames :)

rees.

#1 lore raw
Quoted 8 lines · Rees Boffey

in the cpufreq documenatation in my 2.4.21-benh kernel it mentions that arguments echoed to the /proc/cpufreq entry are first validated before any changes are made. my question is, is it possible to remove this validatio to allow the overclocking of the cpu?
the ibook2.2 that i use is possible of being overclocked via software using an early version of the CHUD tools for osx but as of yet i have not found a way to do it under linux.
appreciate any replies/flames :)

Well... some PowerMac models support only dual speeds (via PMU changing the PLL strapping & resetting the CPU). Some others (the 750FX based iBooks) could in theory be programmed to any speed supported by the PLL... Currently, I do not have code to take advantage of this "feature". Those chips have 2 PLLs and can switch instantly between them. One is setup for full speed, the other for "low speed" by the firmware, all I support via cpufreq so far is to switch between those 2

Ben.