advansys problems
i get this error with 2.4.21-ac4
advansys: advansys_reset: board 0: SCSI bus reset started...
advansys: advansys_reset: board 0: SCSI bus reset successful...
scsi: device set offline - not ready or command retry failed after bus reset:
host 0 channel 0 id 0 lun 0
then it displays the 2 'advansys_reset' messages again and freezes... i never used to get any of these problems or messages in kernel version 2.4.21,
is this bug known already?
Nehal
Quoted 7 lines · On Maw, 2003-07-01 at 01:31, [email protected] wrote:
i get this error with 2.4.21-ac4
advansys:
advansys_reset: board 0: SCSI bus reset started...
advansys:advansys_reset: board 0: SCSI bus reset successful...
scsi: device set offline - not ready or command retry failed after bus reset:
host 0 channel 0 id 0 lun 0
Quoted 5 lines
then it displays the 2 '
advansys_reset' messages again and freezes... i never used to get any of these problems or messages in kernel version 2.4.21,is this bug known already?
Can you try a kernel with ACPI disabled as a first guess (-ac and base are the same for the advansys driver)
Quoted 8 lines · Alan Cox
Quoted 7 lines · On Maw, 2003-07-01 at 01:31, [email protected] wrote:
i get this error with 2.4.21-ac4
advansys:
advansys_reset: board 0: SCSI bus reset started...
advansys:advansys_reset: board 0: SCSI bus reset successful...
scsi: device set offline - not ready or command retry failed after bus
reset: host 0 channel 0 id 0 lun 0
Quoted 9 lines
Quoted 5 lines
then it displays the 2 '
advansys_reset' messages again and freezes... i never used to get any of these problems or messages in kernel version 2.4.21,is this bug known already?
Can you try a kernel with ACPI disabled as a first guess (-ac and base are the same for the advansys driver)
that did it, i disabled ACPI ..... and now SCSI in 2.4.21-ac4 works fine now...
Nehal