orinoco USB driver
I'm currently trying to get my Avaya Wireless 'Silver' USB device to work with the orinoco_usb driver v0.2.1.
Firstly, it is not 'supported.' So I had to use force_unsupported=1. But the firmware you download is from Avaya's site, so it seems to me like it should work!
Here's what i get:
firesong:/usr/src/orinoco-usb-0.2.1# modprobe orinoco_usb debug=1 force_unsupported=1 /usr/src/orinoco-usb-0.2.1/driver/orinoco_usb.c: Device is not supported (you may want to set force_unsupported=1) /usr/src/orinoco-usb-0.2.1/driver/orinoco_usb.c: Trying to handle device anyway as requested /usr/src/orinoco-usb-0.2.1/driver/orinoco_usb.c:bridge_probe: ENTER /usr/src/orinoco-usb-0.2.1/driver/orinoco_usb.c: No firmware to download /usr/src/orinoco-usb-0.2.1/driver/orinoco_usb.c:bridge_remove_in_urb: no urb to remove /usr/src/orinoco-usb-0.2.1/driver/orinoco_usb.c:bridge_delete: ENTER unregister_netdevice: device wlan%d/cf4f3000 never was registered /usr/src/orinoco-usb-0.2.1/driver/orinoco_usb.c:bridge_delete: EXIT /usr/src/orinoco-usb-0.2.1/driver/orinoco_usb.c:bridge_probe: EXIT drivers/usb/core/usb.c: registered new driver Orinoco USB orinoco_usb.c v0.2.1 (Manuel Estrada Sainz <[email protected]>)
The light does not come on and I don't get any device. I notice that the firmware is loaded from a .SYS file and installed into the hotplug /usr/lib directory. When is this loaded?
Do you have any pointers? It would be really nice to get the card to work!
Regards
Josh
Signature · 5 lines
"Notice that, written there, rather legibly, in the Baroque style common
to New York subway wall writers, was, uhm... was the old familiar
suggestion. And rather beautifully illustrated, as well..."
-- Art Garfunkel on the inspiration for "A Poem On The Underground Wall"Quoted 22 lines · Joshua Kwan
I'm currently trying to get my Avaya Wireless 'Silver' USB device to work with the
orinoco_usbdriver v0.2.1.Firstly, it is not 'supported.' So I had to use force_unsupported=1. But the firmware you download is from Avaya's site, so it seems to me like it should work!
Here's what i get:
firesong:/usr/src/orinoco-usb-0.2.1# modprobe orinoco_usb debug=1 force_unsupported=1 /usr/src/orinoco-usb-0.2.1/driver/orinoco_usb.c: Device is not supported (you may want to set force_unsupported=1) /usr/src/orinoco-usb-0.2.1/driver/orinoco_usb.c: Trying to handle device anyway as requested /usr/src/orinoco-usb-0.2.1/driver/orinoco_usb.c:bridge_probe: ENTER /usr/src/orinoco-usb-0.2.1/driver/orinoco_usb.c: No firmware to download /usr/src/orinoco-usb-0.2.1/driver/orinoco_usb.c:bridge_remove_in_urb: no urb to remove /usr/src/orinoco-usb-0.2.1/driver/orinoco_usb.c:bridge_delete: ENTER unregister_netdevice: device wlan%d/cf4f3000 never was registered /usr/src/orinoco-usb-0.2.1/driver/orinoco_usb.c:bridge_delete: EXIT /usr/src/orinoco-usb-0.2.1/driver/orinoco_usb.c:bridge_probe: EXIT drivers/usb/core/usb.c: registered new driver Orinoco USB orinoco_usb.c v0.2.1 (Manuel Estrada Sainz <[email protected]>)
Quoted 6 lines
The light does not come on and I don't get any device. I notice that the firmware is loaded from a .SYS file and installed into the hotplug
/usr/libdirectory. When is this loaded?Do you have any pointers? It would be really nice to get the card to work!
You need a working hotplug package for the new driver to work.
Manuel
Signature · 6 lines
--- Manuel Estrada Sainz <[email protected]> <[email protected]> <[email protected]> ------------------------ <[email protected]> ------------------- Let us have the serenity to accept the things we cannot change, courage to change the things we can, and wisdom to know the difference.
Quoted 23 lines · Manuel Estrada Sainz
Quoted 22 lines · Joshua Kwan
I'm currently trying to get my Avaya Wireless 'Silver' USB device to work with the
orinoco_usbdriver v0.2.1.Firstly, it is not 'supported.' So I had to use force_unsupported=1. But the firmware you download is from Avaya's site, so it seems to me like it should work!
Here's what i get:
firesong:/usr/src/orinoco-usb-0.2.1# modprobe orinoco_usb debug=1 force_unsupported=1 /usr/src/orinoco-usb-0.2.1/driver/orinoco_usb.c: Device is not supported (you may want to set force_unsupported=1) /usr/src/orinoco-usb-0.2.1/driver/orinoco_usb.c: Trying to handle device anyway as requested /usr/src/orinoco-usb-0.2.1/driver/orinoco_usb.c:bridge_probe: ENTER /usr/src/orinoco-usb-0.2.1/driver/orinoco_usb.c: No firmware to download /usr/src/orinoco-usb-0.2.1/driver/orinoco_usb.c:bridge_remove_in_urb: no urb to remove /usr/src/orinoco-usb-0.2.1/driver/orinoco_usb.c:bridge_delete: ENTER unregister_netdevice: device wlan%d/cf4f3000 never was registered /usr/src/orinoco-usb-0.2.1/driver/orinoco_usb.c:bridge_delete: EXIT /usr/src/orinoco-usb-0.2.1/driver/orinoco_usb.c:bridge_probe: EXIT drivers/usb/core/usb.c: registered new driver Orinoco USB orinoco_usb.c v0.2.1 (Manuel Estrada Sainz <[email protected]>)
Quoted 8 lines
Quoted 6 lines
The light does not come on and I don't get any device. I notice that the firmware is loaded from a .SYS file and installed into the hotplug
/usr/libdirectory. When is this loaded?Do you have any pointers? It would be really nice to get the card to work!
You need a working hotplug package for the new driver to work.
What do you mean? Does the base linux-hotplug scripts need to be changed for this device somehow?
thanks,
greg k-h
Quoted 28 lines · Greg KH
Quoted 27 lines · Manuel Estrada Sainz
Quoted 26 lines · Joshua Kwan
I'm currently trying to get my Avaya Wireless 'Silver' USB device to work with the
orinoco_usbdriver v0.2.1.Firstly, it is not 'supported.' So I had to use force_unsupported=1. But the firmware you download is from Avaya's site, so it seems to me like it should work!
Here's what i get:
firesong:/usr/src/orinoco-usb-0.2.1# modprobe orinoco_usb debug=1 force_unsupported=1 /usr/src/orinoco-usb-0.2.1/driver/orinoco_usb.c: Device is not supported (you may want to set force_unsupported=1) /usr/src/orinoco-usb-0.2.1/driver/orinoco_usb.c: Trying to handle device anyway as requested /usr/src/orinoco-usb-0.2.1/driver/orinoco_usb.c:bridge_probe: ENTER /usr/src/orinoco-usb-0.2.1/driver/orinoco_usb.c: No firmware to download /usr/src/orinoco-usb-0.2.1/driver/orinoco_usb.c:bridge_remove_in_urb: no urb to remove /usr/src/orinoco-usb-0.2.1/driver/orinoco_usb.c:bridge_delete: ENTER unregister_netdevice: device wlan%d/cf4f3000 never was registered /usr/src/orinoco-usb-0.2.1/driver/orinoco_usb.c:bridge_delete: EXIT /usr/src/orinoco-usb-0.2.1/driver/orinoco_usb.c:bridge_probe: EXIT drivers/usb/core/usb.c: registered new driver Orinoco USB orinoco_usb.c v0.2.1 (Manuel Estrada Sainz <[email protected]>)The light does not come on and I don't get any device. I notice that the firmware is loaded from a .SYS file and installed into the hotplug
/usr/libdirectory. When is this loaded?
Quoted 7 lines
Quoted 4 lines
Quoted 2 lines
Do you have any pointers? It would be really nice to get the card to work!
You need a working hotplug package for the new driver to work.
What do you mean? Does the base linux-hotplug scripts need to be changed for this device somehow?
Adding /etc/hotplug/firmware.agent is enough for request_firmware() to work. I currently include the 2.4 backport of request_firmware() with it.
Once a more recent hotplug gets into Debian sid (currently it is 0.0.20030117-7) I'll change it and use hotplug.d.
Have a nice day
Manuel
Signature · 6 lines
--- Manuel Estrada Sainz <[email protected]> <[email protected]> <[email protected]> ------------------------ <[email protected]> ------------------- Let us have the serenity to accept the things we cannot change, courage to change the things we can, and wisdom to know the difference.