2.6.0-test1: Hang during boot on Intel D865PERL motherboard
Hi,
I've compiled linux-2.6.0-test1 kernel with the attached "config" file. When trying to boot the kernel, it hangs on "Uncompress Linux kernel...OK". The system is:
Intel 3.06Ghz Pentium IV
Intel D865PERL motherboard
ATI Radeon 7000 VE
I've tried with SMP and UP, but the kernel hangs anyway. The attached "config" contains the minimal set of drivers I can think of that could lead to a bootable system.
Curiously, Red Hat's 9 Stock kernel does boot perfectly with SMP and enables HT successfully. However, RH kernel doesn't seem to recognize the built-in SATA controller.
Any ideas?
Thanks!
Signature · 5 lines
______________________________________________ http://www.linuxmail.org/ Now with e-mail forwarding for only US$5.95/yr Powered by Outblaze
Quoted 3 lines · Felipe Alfaro Solana
Hi,
I've compiled linux-2.6.0-test1 kernel with the attached "config" file. When trying to boot the kernel, it hangs on "Uncompress Linux kernel...OK". The system is:
You only have the dummy console selected ensuring you have:
CONFIG_CONSOLE_VGA=y
Should display things to screen.
Paul
Quoted 8 lines · Paul Nasrat
Quoted 3 lines · Felipe Alfaro Solana
Hi,
I've compiled linux-2.6.0-test1 kernel with the attached "config" file. When trying to boot the kernel, it hangs on "Uncompress Linux kernel...OK". The system is:
You only have the dummy console selected ensuring you have:
CONFIG_CONSOLE_VGA=y
I should add please read:
http://codemonkey.org.uk/post-halloween-2.5.txt
Which documents this and other things to expect.
Paul
On Mon, 14 Jul 2003 12:03:35 +0100
Paul Nasrat <[email protected]> bubbled:
Quoted 10 lines · Felipe Alfaro Solana
Quoted 5 lines
Hi,
I've compiled linux-2.6.0-test1 kernel with the attached "config" file. When trying to boot the kernel, it hangs on "Uncompress Linux kernel...OK". The system is:
You only have the dummy console selected ensuring you have:
CONFIG_CONSOLE_VGA=y
you meant:CONFIG_VGA_CONSOLE=y
Quoted 9 lines
Should display things to screen.
Paul
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Signature · 7 lines
MyExcuse: tachyon emissions overloading the system Martin Zwickel <[email protected]> Research & Development TechnoTrend AG <http://www.technotrend.de>
Quoted 10 lines · Paul Nasrat
Quoted 3 lines · Felipe Alfaro Solana
Hi,
I've compiled linux-2.6.0-test1 kernel with the attached "config" file. When trying to boot the kernel, it hangs on "Uncompress Linux kernel...OK". The system is:
You only have the dummy console selected ensuring you have:
CONFIG_CONSOLE_VGA=yShould display things to screen.
Yeah! I'm stupid... I forgot to check that. Thanks :-)
Quoted 3 lines · Felipe Alfaro Solana
Hi,
I've compiled linux-2.6.0-test1 kernel with the attached "config" file. When trying to boot the kernel, it hangs on "Uncompress Linux kernel...OK". The system is:
Hang or blank screen?
Known gotchas.
~~~~~~~~~~~~~~
Certain known bugs are being reported over and over. Here are the workarounds.
- Blank screen after decompressing kernel?
Make sure your .config has
CONFIG_INPUT=y, CONFIG_VT=y, CONFIG_VGA_CONSOLE=y and CONFIG_VT_CONSOLE=y A lot of people have discovered that taking their .config from 2.4 and running make oldconfig to pick up new options leads to problems, notably with CONFIG_VT not being set.
Signature · 9 lines
/================================================\ | Ramón Rey Vicente <ramon.rey at hispalinux.es> | | | | Jabber ID <rreylinux at jabber.org> | | | | Public GPG Key http://pgp.escomposlinux.org | | | | GLiSa http://glisa.hispalinux.es | \================================================/