ipq+AF8-set+AF8-verdict problem in bridge+-iptables
Hello Harald,
Thank you for your emails!
I want to use the iptable_queue in bridge+-iptables environment. I can get the packet in userspace using -j QUEUE command. However, If I change the packet size. for example, I change the ping icmp packet size to 400, the packet Ethernet header is changed. In my test, the MAC address is changed to 0xffffffffff. I can capture this packet using sniffer tool. Since the MAC address is changed, the other computer cannot receive the ICMP packet.
It seems that the bridge iptables patch changed something in the function ipq_set_verdict().
Regarding the MTU issue, you are right. the ipq_set_verdict function does not perform the IP fragment. If I send a packet larger than MTU, it is missing. Is it by design?
Can I modify the ipq_set_verdict function to perform the IP fragment? Is there any patch for this IP fragment issue?
Thank you again for your help!
Yong
Quoted 24 lines
----- Original Message -----
From: "Harald Welte" <[email protected]>
To: "Yong Li" <[email protected]>
Cc: <[email protected]>
Sent: Monday, July 14, 2003 4:07 PM
Subject: Re:ipq_set_verdictproblem in bridge+-iptablesQuoted 6 lines · Yong Li
Hello All,
I encountered a problem with the
ipq_set_verdictfunction. I want to modify the packet content and size using theipq_set_verdictfunction. However, I found I cannot change the IP packet size more than 400+- bytes. Is it a known issue?what do you mean by 'I cannot' ? What happens? Is an error returned to the
ipq_set_verdict()call? Is the packet silently discarded? Is the packet truncated?Anyway, it should work. But if you exceed the outgoing interface's MTU, I could imagine that no fragmentation happens...
Quoted 2 lines
Thanks in advance!
Yong
Quoted 9 lines · Yong
I want to use the
iptable_queuein bridge+-iptables environment. I can get
the packet in userspace using -j QUEUE command. However, If I change the packet size. for example, I change the ping icmp packet size to 400, the packet Ethernet header is changed. In my test, the MAC address is changed to0xffffffffff. I can capture this packet using sniffer tool. Since the MAC address is changed, the other computer cannot receive the ICMP packet.It seems that the bridge iptables patch changed something in the function
ipq_set_verdict().
Please test the patch below.
cheers,
Bart
--- linux-2.6.0-test1/net/ipv4/netfilter/ip_queue.c.old 2003-07-16 19:35:07.000000000 +-0200
+-+-+- linux-2.6.0-test1/net/ipv4/netfilter/ip_queue.c 2003-07-16 19:39:05.000000000 +-0200
@@ -353,6 +-353,11 @@ ipq_mangle_ipv4(ipq_verdict_msg_t *v, st
}
if (e->skb->sk)
skb_set_owner_w(newskb, e->skb->sk);
+-#if defined(CONFIG_BRIDGE) || defined(CONFIG_BRIDGE_MODULE) +- /* bridged packets already have their Ethernet header */ +- if (e->skb->nf_bridge) +- memcpy(newskb->data - 16, e->skb->data - 16, 16); +-#endif
kfree_skb(e->skb);
e->skb = newskb;
}