Trouble with 2.6.0-test1 on ibook2
I'm trying to boot 2.6.0-test1 on my ibook2. I compiled a kernel and it begins to boot but hangs immediately after the line
openpic: exit
is printed. Or at least seems to hang as the screen stops showing anything else and just leaves the messages up to that point forever. It also corrupted my file system so I'm reinstalling now.
Has anyone been running the devel kernel on an ibook2? Can anyone give me pointers on how to debug or work around this problem when I finish reinstalling?
--
Ryan Boder
http://www.bitwiser.org/icanoop
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
Quoted 5 lines · Ryan Boder
I'm trying to boot 2.6.0-test1 on my ibook2. I compiled a kernel and it begins to boot but hangs immediately after the line
openpic: exit
Quoted 7 lines
is printed. Or at least seems to hang as the screen stops showing anything else and just leaves the messages up to that point forever. It also corrupted my file system so I'm reinstalling now.
Has anyone been running the devel kernel on an ibook2? Can anyone give me pointers on how to debug or work around this problem when I finish reinstalling?
What graphics chip does the machine have, and have you built OFfb into the kernel? For me, radeonfb hasn't been working with recent 2.5 kernels, in fact there's been no trace whatsoever of it in the kernel output, as if it wasn't there. I wonder if it's related to the PCI code; with a 2.4 kernel, I get a lot of PCI related output, like
PCI: Probing PCI hardware
Scanning bus 00
Found 00:58 [106b/002d] 000600 00
Found 00:80 [1002/4c66] 000300 00
Fixup res 1 (101) of dev 00:10.0: 400 -> 802400
Fixups for bus 00
Bus scan for 00 returning with max=00
Scanning bus 10
[ more PCI probing stuff ]
PCI:24:0e.0: Resource 0: f5000000-f5000fff (f=200), vd: 11c1, dev: 5811 Linux NET4.0 for Linux 2.4
whereas with a 2.5 kernel just this:
PCI: Probing PCI hardware
Can't get bus-range for /pci@f2000000/cardbus@1a
BIO: pool of 256 setup, 14Kb (56 bytes/bio)
But then maybe the code in question has just been made less verbose?
--
Earthling Michel Dänzer \ Debian (powerpc), XFree86 and DRI developer
Software libre enthusiast \ http://svcs.affero.net/rm.php?r=daenzer
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
Quoted 2 lines · Michel Dänzer
What graphics chip does the machine have, and have you built OFfb into the kernel?
Rage Mobility M3 AGP 2x (rev 02).
Yes, I did. I'll try again without that as soon as my iso finished downloading. I figure I might as well move to YDL 3.0 while I'm reinstalling.
Thanks for the advice,
--
Ryan Boder
http://www.bitwiser.org/icanoop
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
Quoted 8 lines · Ryan Boder
Quoted 2 lines · Michel Dänzer
What graphics chip does the machine have, and have you built OFfb into the kernel?
Rage Mobility M3 AGP 2x (rev 02).
Yes, I did. I'll try again without that as soon as my iso finished downloading.
Well, OFfb comes up fine here.
--
Earthling Michel Dänzer \ Debian (powerpc), XFree86 and DRI developer
Software libre enthusiast \ http://svcs.affero.net/rm.php?r=daenzer
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 8 lines · Owen Stampflee
Quoted 3 lines
Has anyone been running the devel kernel on an ibook2? Can anyone give me pointers on how to debug or work around this problem when I finish reinstalling?
I'm running 2.6.0-test1 from linuxppc-2.5 on my M3 equipped iBook2 and it seems to be working okay.
My guess is that you're probably missing
CONFIG_FRAMEBUFFER_CONSOLE(Graphics -> Console display).
I got it working by using the pmac defconfig and just modifying that. I suppose a smarter person would have done that in the first place instead of just doing the config from scratch.
I'm still having an issue with the devel kernel and XFree86, but the airport driver is working and that's what I'm interested in working on so I guess I'm OK.
Thanks for the help,
--
Ryan Boder
http://www.bitwiser.org/icanoop
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/