Skip to contentSkip to conversation

Partition check issue (againandagain??)

DISCUSSION Orm Finnendahl 2 participants 2 messages Jul 25, 2003

lore
Share & tools
lore
#0 lore raw

Hi,

I'm trying to run a new (self-compiled) 2.4.21 kernel on my Acer Notebook with Ali15x3 Chipset, revision 195 (C3) and experience a freeze upon bootup at the partition check.

Kernel version <= 2.4.18 works fine on my laptop (including dma), all kernels > 2.4.18 lock up at boot.

The partition check line shows:

Partition check:
hda1 hda2 hda3 hda4 <

before it freezes.

With the working 2.4.18 kernel the line shows:

Partition check:
hda1 hda2 hda3 hda4 <hda5 hda6>

hda5 and hda6 are swap and the main partition
respectively, running a reiserfs.

I checked the mailing list and found some hints for 2.4.19 kernels, but that bug doesn't seem to apply as my chipset revision is < C4, apart from that it seems to be fixed in /drivers/ide/pci/alim15x3.c

Any ideas?

Please cc the mail to me. I tried to subscribe to the list an hour ago but didn't get any reply yet.

Thanx,
Orm

#1 lore raw
Quoted 11 lines · Orm Finnendahl

Notebook with Ali15x3 Chipset, revision 195 (C3) and experience a freeze upon bootup at the partition check.

Kernel version <= 2.4.18 works fine on my laptop (including dma), all kernels > 2.4.18 lock up at boot.

The partition check line shows:

Partition check:
hda1 hda2 hda3 hda4 <

Quoted 6 lines

before it freezes.

With the working 2.4.18 kernel the line shows:

Partition check:
hda1 hda2 hda3 hda4 <hda5 hda6>

This sounds like your kernel succeeds in reading sector 0 but fails to read the starting sector of the extended partition. An IDE problem, I suppose.