Skip to contentSkip to conversation

PROBLEM: kswapd and toshiba libretto 50ct

DISCUSSION Michael Frank 3 participants 3 messages Aug 2, 2003 – Aug 12, 2003

lore
Share & tools
lore
#0 lore raw

I used 2.4 on a 100MHz L60 until it passed away recently...

Stop overclocking!

If problem persists, config you kernel for serial console and grab the oops.

Regards
Michael

Signature · 7 lines
Powered by linux-2.6-test2-mm2. Compiled with gcc-2.95-3 - mature and rock solid

2.4/2.6 kernel testing: ACPI PCI interrupt routing, keyboard failure with
		        ACPI, PCI IRQ sharing and swsusp
2.6 kernel testing: PCMCIA yenta_socket, Suspend to RAM with ACPI S1-S3. 

More info on swsusp: http://sourceforge.net/projects/swsusp/
#1 lore raw

i have managed to resolder that pin, the kernel detects a clock speed of 75mhz again. The 2.4 kernels still don't work though. I've tried using both a modular build and one with everything tailored to the system.

I don't have the oops message on hand, but i can get it if required. As always, i can't check it on the hardware itself.

Thanks in advance,
Matthew

#2 lore raw
Quoted 9 lines · Matthew Peters

i have managed to resolder that pin, the kernel detects a clock speed of 75mhz again. The 2.4 kernels still don't work though. I've tried using both a modular build and one with everything tailored to the system.

I don't have the oops message on hand, but i can get it if required. As always, i can't check it on the hardware itself.

Thanks in advance,
Matthew

Please check
- selected processor type: Pentium-Classic
- compiled with gcc295 or equivalent
- Leave frame buffers out
- put only minimal drivers (including serial port and console on serial port)

If it still does not work, please get the oops via serial console, run it through ksymoops, without it is not much we can do.

Regards
Michael

Signature · 6 lines
Powered by linux-2.6. Compiled with gcc-2.95-3 - mature and rock solid

2.4/2.6 kernel testing: ACPI PCI interrupt routing, PCI IRQ sharing, swsusp
2.6 kernel testing:     PCMCIA yenta_socket, Suspend to RAM with ACPI S1-S3

More info on swsusp: http://sourceforge.net/projects/swsusp/