IDE DMA problem with 2.6.0-test1
Hi,
I got the following from my logs this morning, any ideas whats happening. Both hda and hdb are IDE hard drives. hdb is only used for backups and wasn't being used at the time.
Aug 6 08:30:52 gandalf -- MARK --
Aug 6 08:31:37 gandalf kernel: hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
Aug 6 08:31:37 gandalf kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
Aug 6 08:31:40 gandalf kernel: hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
Aug 6 08:31:40 gandalf kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
Aug 6 08:32:16 gandalf kernel: hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
Aug 6 08:32:16 gandalf kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
Aug 6 08:32:24 gandalf kernel: hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
Aug 6 08:32:24 gandalf kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
Aug 6 08:32:26 gandalf kernel: hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
Aug 6 08:32:26 gandalf kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
Aug 6 08:32:26 gandalf kernel: hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
Aug 6 08:32:26 gandalf kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
Aug 6 08:32:26 gandalf kernel: hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
Aug 6 08:32:26 gandalf kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
Aug 6 08:32:26 gandalf kernel: hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
Aug 6 08:32:26 gandalf kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
Aug 6 08:32:26 gandalf kernel: hdb: DMA disabled
Aug 6 08:32:26 gandalf kernel: ide0: reset: success
Aug 6 08:50:52 gandalf -- MARK --If you need anymore info then just say
Nick
Check your IDE cables.
Quoted 30 lines · Nick Sanders
Hi,
I got the following from my logs this morning, any ideas whats happening. Both hda and hdb are IDE hard drives. hdb is only used for backups and wasn't being used at the time.
Aug 6 08:30:52 gandalf -- MARK -- Aug 6 08:31:37 gandalf kernel: hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } Aug 6 08:31:37 gandalf kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC } Aug 6 08:31:40 gandalf kernel: hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } Aug 6 08:31:40 gandalf kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC } Aug 6 08:32:16 gandalf kernel: hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } Aug 6 08:32:16 gandalf kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC } Aug 6 08:32:24 gandalf kernel: hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } Aug 6 08:32:24 gandalf kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC } Aug 6 08:32:26 gandalf kernel: hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } Aug 6 08:32:26 gandalf kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC } Aug 6 08:32:26 gandalf kernel: hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } Aug 6 08:32:26 gandalf kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC } Aug 6 08:32:26 gandalf kernel: hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } Aug 6 08:32:26 gandalf kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC } Aug 6 08:32:26 gandalf kernel: hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } Aug 6 08:32:26 gandalf kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC } Aug 6 08:32:26 gandalf kernel: hdb: DMA disabled Aug 6 08:32:26 gandalf kernel: ide0: reset: success Aug 6 08:50:52 gandalf -- MARK --If you need anymore info then just say
Nick
Quoted 2 lines · Bartlomiej Zolnierkiewicz
Check your IDE cables.
As long as its not the drive that's great.
I'll get a new cable.
Thanks
Nick
You can also install smartmontools (http://smartmontools.sf.net/)
and check your drives (if they support SMART of course).
Quoted 10 lines · Nick Sanders
Quoted 1 line · Bartlomiej Zolnierkiewicz
Check your IDE cables.
As long as its not the drive that's great.
I'll get a new cable.
Thanks
Nick
In article <[email protected]>,
Quoted 3 lines · Bartlomiej Zolnierkiewicz
You can also install smartmontools (http://smartmontools.sf.net/)
and check your drives (if they support SMART of course).
Point of interest: I just had a Maxtor drive go bad on me recently. Their diag tools caught it, as did my ear (made a nice clunking noise :-). But SMART didn't report a thing, and I looked hard too. :-/
mrc
Signature · 3 lines
Mike Castle [email protected] www.netcom.com/~dalgoda/ We are all of us living in the shadow of Manhattan. -- Watchmen fatal ("You are in a maze of twisty compiler features, all different"); -- gcc
Can be buggy drive's firmware or bug in smartmontools (unlikely)...
--bartlomiej
Quoted 12 lines · Mike Castle
In article <[email protected]>,
Quoted 3 lines · Bartlomiej Zolnierkiewicz
You can also install smartmontools (http://smartmontools.sf.net/)
and check your drives (if they support SMART of course).Point of interest: I just had a Maxtor drive go bad on me recently. Their diag tools caught it, as did my ear (made a nice clunking noise :-). But SMART didn't report a thing, and I looked hard too. :-/
mrc
I don't know, I've had a few SMART capable Maxtor drives go bad to the point I knew it without a warning. Eventually, when things got really bad though, they would report SMART errors. The errors were at first intermittent, and then got to the point the warning wouldn't go away. In their defense, two of them (I've had 5) had smart errors and I never encountered any noticeable defects (still, I replaced them when they were doing the upgrade program so I could get a new 3 year warranty).
All of those are several generations old though, the newer ones I have now don't seem to want to die ;-)
--Wes--
Quoted 33 lines · Bartlomiej Zolnierkiewicz
Can be buggy drive's firmware or bug in smartmontools (unlikely)...
--bartlomiej
Quoted 8 lines · Mike Castle
In article <[email protected]>,
Quoted 4 lines · Bartlomiej Zolnierkiewicz
You can also install smartmontools (http://smartmontools.sf.net/)
and check your drives (if they support SMART of course).Quoted 7 lines
Point of interest: I just had a Maxtor drive go bad on me recently. Their diag tools caught it, as did my ear (made a nice clunking noise :-). But SMART didn't report a thing, and I looked hard too. :-/
mrc
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/