IDE Hotswap Disks
Hi,
I've a rack for ide HDDs that claims to be hotswappable, in fact, I'm able to remove the disk without problems after unmount it. The problem is when I try to connect it after booting without it. The only way I have is rebooting (also with warm reboot) the machine, and then the kernel rescan the bus and see the new drive.
I tried hdparm -R /dev/hdb (i'm using devfs, but also create the block device 0 64 do nothing), but it gave me "expected hwif_ctrl". There's a way to rescan the bus without reboot? I need to try with ide-scsi support?
TIA.
Signature · 1 line
Flameeyes <[email protected]>
Quoted 9 lines · Flameeyes
I've a rack for ide HDDs that claims to be hotswappable, in fact, I'm able to remove the disk without problems after unmount it. The problem is when I try to connect it after booting without it. The only way I have is rebooting (also with warm reboot) the machine, and then the kernel rescan the bus and see the new drive.
I tried hdparm -R/dev/hdb(i'm using devfs, but also create the block device 0 64 do nothing), but it gave me "expectedhwif_ctrl". There's a way to rescan the bus without reboot? I need to try with ide-scsi support?
The hdparm package includes a script which does that (idectl). I used it sporadically with a Thinpad Ultrabay IDE disk and cdrom.
Johannes
Quoted 2 lines · Johannes Stezenbach
The hdparm package includes a script which does that (idectl). I used it sporadically with a Thinpad Ultrabay IDE disk and cdrom.
I'm working on adding proper support for this in the 2.4-ac tree at the moment