PC going backwards
Hello,
Board: An 8260 based custom board with 64M of RAM. After board reset, the PC (Program Counter) start executing at 0x40000100 but the PC goes backwards. I also tried to trace using BDI "ti 0x40000100" with the same result.
Let me know if you have faced the similar problem.
Thanks,
Hebbar.
Hi Hebbar,
to me it looks like, that the HRCW contains something which does not allow accessing the RESET Vector correctly. So, check your HRCW.
Georg
Quoted 32 lines
-----Ursprungliche Nachricht-----
Von: u-boot-users-admin at lists.sourceforge.net [mailto:u-boot-users-admin at lists.sourceforge.net]Im Auftrag von S. Hebbar
Gesendet: Dienstag, 12. August 2003 10:51
An: u-boot-users at lists.sourceforge.net
Betreff: [U-Boot-Users] PC going backwardsHello,
Board: An 8260 based custom board with 64M of RAM. After board reset, the PC (Program Counter) start executing at
0x40000100but the PC goes backwards. I also tried to trace using BDI "ti0x40000100" with the same result.Let me know if you have faced the similar problem.
Thanks,
Hebbar.-------------------------------------------------------
This SF.Net email sponsored by: Free pre-built ASP.NET sites including Data Reports, E-commerce, Portals, and Forums are available now. Download today and enter to win an XBOX or Visual Studio .NET.
http://aspnet.click-url.com/go/psa00100003ave/direct;at.aspnet_072303_01/01
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users