2.5.x net driver queue

BK users:

bk pull bk://kernel.bkbits.net/jgarzik/net-drivers-2.6

Patch users:

ftp://ftp.kernel.org/pub/linux/kernel/people/jgarzik/patchkits/2.6/2.6.0-test4-bk2-netdrvr1.patch.bz2

This will update the following files:

 drivers/net/3c501.c             |   91 +-------
 drivers/net/3c501.h             |    2 
 drivers/net/3c503.c             |   71 ------
 drivers/net/3c505.c             |   96 +-------
 drivers/net/3c507.c             |   97 +-------
 drivers/net/3c515.c             |   94 +-------
 drivers/net/3c523.c             |   73 ------
 drivers/net/3c527.c             |   94 +-------
 drivers/net/3c59x.c             |   47 +---
 drivers/net/8139cp.c            |  444 +++++++++++++++-------------------------
 drivers/net/Kconfig             |    2 
 drivers/net/pcmcia/3c574_cs.c   |   28 --
 drivers/net/pcmcia/3c589_cs.c   |   81 +------
 drivers/net/pcmcia/axnet_cs.c   |   28 --
 drivers/net/pcmcia/fmvj18x_cs.c |   75 +-----
 drivers/net/pcmcia/ibmtr_cs.c   |   35 ---
 drivers/net/pcmcia/nmclan_cs.c  |   77 ++----
 drivers/net/pcmcia/pcnet_cs.c   |   41 ---
 drivers/net/pcmcia/xirc2ps_cs.c |   28 --
 drivers/net/sis190.c            |  157 +++++++-------
 drivers/net/sis900.c            |   43 +--
 drivers/net/tulip/dmfe.c        |   62 +----
 drivers/net/tulip/xircom_cb.c   |   38 ---
 drivers/net/wireless/ray_cs.c   |   32 --
 24 files changed, 559 insertions(+), 1277 deletions(-)

through these ChangeSets:

<[email protected]> (03/08/26 1.1306)
[netdrvr sis190] remove unneeded alignment code, other small fixes

Driver does not need to enforce 256 byte alignment for data returned from pci_alloc_consistent().
- {rx/tx}_dma_aligned and {rx/td}_dma_raw are both replaced by {rx/tx}_dma;
- {rx/tx}_desc_raw is replaced by direct use of {Rx/Tx}DescArray;
- SiS190_open()
+ fixup for a lack of kmalloc() failure handling;
+ (return status) there is no need for both retval/rc: merge them;
+ anonymous printk() fixup: the name of the guilty device is printed;
- define {RX/TX}_DESC_TOTAL_SIZE because I am too lazy to read twice the same lengthy arithmetic expression.

<[email protected]> (03/08/26 1.1305)
[wireless ray_cs] ethtool_ops support

<[email protected]> (03/08/26 1.1304)
[netdrvr xircom_cb] ethtool_ops support

Also, export PCI bus id via ETHTOOL_GDRVINFO.

<[email protected]> (03/08/26 1.1303)
[netdrvr pcmcia] convert several drivers to ethtool_ops

Drivers updated: fmvj18x_cs, ibmtr_cs, nmclan_cs, pcnet_cs, xirc2ps_cs.

<[email protected]> (03/08/26 1.1302)
[netdrvr pcmcia] ethtool_ops for 3c574, 3c589, axnet

<[email protected]> (03/08/26 1.1301)
[netdrvr] ethtool_ops support for 3c515, 3c523, 3c527, and dmfe

<[email protected]> (03/08/26 1.1300)
[netdrvr] ethtool_ops support in 3c503, 3c505, 3c507

<[email protected]> (03/08/26 1.1299)
[netdrvr 3c501] ethtool_ops support

<[email protected]> (03/08/26 1.1298)
[netdrvr sis190] make driver depend on CONFIG_BROKEN

Until RX path is cleaned up to use PCI DMA API and not virt_to_bus.

<[email protected]> (03/08/26 1.1297)
[netdrvr sis190] convert TX path to use PCI DMA API

Also, minor changes:
* mark ->hard_start_xmit ETH_ZLEN test as unlikely()
* use cpu_to_le32() and le32_to_cpu() in TX path
* fix two leak in error path, in ->hard_start_xmit
* don't test netif_queue_stopped() in TX completion path, netif_wake_queue() already does that.

<[email protected]> (03/08/26 1.1296)
[netdrvr 8139cp] ethtool_ops support

<[email protected]> (03/08/26 1.1295)
[netdrvr sis900] ethtool_ops support

<[email protected]> (03/08/26 1.1294)
[netdrvr 3c59x] ethtool_ops support

<[email protected]> (03/08/26 1.1293)
[netdrvr sis190] pass irq argument to synchronize_irq()

Looks like this driver wasn't tested on SMP :)

<[email protected]> (03/08/26 1.1292)
[netdrvr sis190] fix build with older gcc

older gcc's do not support C99/C++ style of variable declarations.