Skip to contentSkip to conversation

CONFIG_64_BIT

PATCH Matthew Wilcox 5 participants 5 messages Sep 2, 2003 – Sep 3, 2003

lore
Share & tools
lore
#0 lore raw

What do people think of CONFIG_64_BIT? It saves us from using !(IA64 || MIPS64 || PARISC64 || S390X || SPARC64 || X86_64) or the X86_64 people deciding their architecture is more important.

I also considered CONFIG_ILP32 vs CONFIG_LP64 (since that's the real problem with, eg, megaraid), but that requires more explanation and offers people several ways to get it wrong (should I depend on ILP32 or !LP64?)

Index: arch/alpha/Kconfig
===================================================================
RCS file: /var/cvs/linux-2.6/arch/alpha/Kconfig,v
retrieving revision 1.3

alpha/Kconfig +3 -0
diff -u -p -r1.3 Kconfig
@@ -11,6 +11,9 @@ config ALPHA
 	  now Hewlett-Packard.  The Alpha Linux project has a home page at
 	  <http://www.alphalinux.org/>.
 
+config 64_BIT
+	def_bool y
+
 config MMU
 	bool
 	default y

Index: arch/ia64/Kconfig
===================================================================
RCS file: /var/cvs/linux-2.6/arch/ia64/Kconfig,v
retrieving revision 1.2

ia64/Kconfig +3 -0
diff -u -p -r1.2 Kconfig
@@ -18,6 +18,9 @@ config IA64
 	  page at <http://www.linuxia64.org/> and a mailing list at
 	  [email protected].
 
+config 64_BIT
+	def_bool y
+
 config MMU
 	bool
 	default y

Index: arch/mips/Kconfig
===================================================================
RCS file: /var/cvs/linux-2.6/arch/mips/Kconfig,v
retrieving revision 1.2

mips/Kconfig +3 -0
diff -u -p -r1.2 Kconfig
@@ -11,6 +11,9 @@ config MIPS64
 	  64-bit processing, otherwise say N.  You must say Y for kernels for
 	  SGI IP27 (Origin 200 and 2000).  If in doubt say N.
 
+config 64_BIT
+	def_bool MIPS64
+
 config MIPS32
 	bool
 	depends on MIPS64 = 'n'

Index: arch/parisc/Kconfig
===================================================================
RCS file: /var/cvs/linux-2.6/arch/parisc/Kconfig,v retrieving revision 1.6

parisc/Kconfig +3 -0
diff -u -p -r1.6 Kconfig
@@ -103,6 +103,9 @@ config PARISC64
 	  enable this option otherwise. The 64bit kernel is significantly bigger
 	  and slower than the 32bit one.
 
+config 64_BIT
+	def_bool PARISC64
+
 config PDC_NARROW
 	bool "32-bit firmware"
 	depends on PARISC64

Index: arch/ppc64/Kconfig
===================================================================
RCS file: /var/cvs/linux-2.6/arch/ppc64/Kconfig,v
retrieving revision 1.3

ppc64/Kconfig +3 -0
diff -u -p -r1.3 Kconfig
@@ -3,6 +3,9 @@
 # see Documentation/kbuild/kconfig-language.txt.
 #
 
+config 64_BIT
+	def_bool y
+
 config MMU
 	bool
 	default y

Index: arch/s390/Kconfig
===================================================================
RCS file: /var/cvs/linux-2.6/arch/s390/Kconfig,v
retrieving revision 1.2

s390/Kconfig +3 -0
diff -u -p -r1.2 Kconfig
@@ -40,6 +40,9 @@ config ARCH_S390X
 	  Select this option if you have a 64 bit IBM zSeries machine
 	  and want to use the 64 bit addressing mode.
 
+config 64_BIT
+	def_bool ARCH_S390X
+
 config ARCH_S390_31
 	bool
 	depends on ARCH_S390X = 'n'

Index: arch/sparc64/Kconfig
===================================================================
RCS file: /var/cvs/linux-2.6/arch/sparc64/Kconfig,v retrieving revision 1.3

sparc64/Kconfig +3 -0
diff -u -p -r1.3 Kconfig
@@ -5,6 +5,9 @@
 
 mainmenu "Linux/UltraSPARC Kernel Configuration"
 
+config 64_BIT
+	def_bool y
+
 config MMU
 	bool
 	default y

Index: arch/x86_64/Kconfig
===================================================================
RCS file: /var/cvs/linux-2.6/arch/x86_64/Kconfig,v retrieving revision 1.2

x86_64/Kconfig +3 -0
diff -u -p -r1.2 Kconfig
@@ -16,6 +16,9 @@ config X86_64
 	  Port to the x86-64 architecture. x86-64 is a 64-bit extension to the
 	  classical 32-bit x86 architecture. For details see http://www.x86-64.org
 
+config 64_BIT
+	def_bool y
+
 config X86
 	bool
 	default y

Index: drivers/scsi/Kconfig
===================================================================
RCS file: /var/cvs/linux-2.6/drivers/scsi/Kconfig,v retrieving revision 1.3

scsi/Kconfig +2 -2
diff -u -p -r1.3 Kconfig
@@ -355,7 +355,7 @@ source "drivers/scsi/aic7xxx/Kconfig.aic
 # All the I2O code and drivers do not seem to be 64bit safe.
 config SCSI_DPT_I2O
 	tristate "Adaptec I2O RAID support "
-	depends on !X86_64 && SCSI
+	depends on !64_BIT && SCSI
 	help
 	  This driver supports all of Adaptec's I2O based RAID controllers as 
 	  well as the DPT SmartRaid V cards.  This is an Adaptec maintained
@@ -416,7 +416,7 @@ config SCSI_AM53C974
 
 config SCSI_MEGARAID
 	tristate "AMI MegaRAID support"
-	depends on PCI && SCSI
+	depends on PCI && SCSI && !64_BIT
 	help
 	  This driver supports the AMI MegaRAID 418, 428, 438, 466, 762, 490
 	  and 467 SCSI host adapters.
Signature · 184 lines
"It's not Hollywood.  War is real, war is primarily not about defeat or
victory, it is about death.  I've seen thousands and thousands of dead bodies.
Do you think I want to have an academic debate on this subject?" -- Robert Fisk
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

What do people think of CONFIG_64_BIT?  It saves us from using
!(IA64 || MIPS64 || PARISC64 || S390X || SPARC64 || X86_64) or
the X86_64 people deciding their architecture is more important.

I also considered CONFIG_ILP32 vs CONFIG_LP64 (since that's the real
problem with, eg, megaraid), but that requires more explanation and
offers people several ways to get it wrong (should I depend on ILP32
or !LP64?)

Index: arch/alpha/Kconfig
===================================================================
RCS file: /var/cvs/linux-2.6/arch/alpha/Kconfig,v
retrieving revision 1.3
diff -u -p -r1.3 Kconfig
--- arch/alpha/Kconfig	23 Aug 2003 02:46:12 -0000	1.3
+++ arch/alpha/Kconfig	2 Sep 2003 14:24:46 -0000
@@ -11,6 +11,9 @@ config ALPHA
 	  now Hewlett-Packard.  The Alpha Linux project has a home page at
 	  <http://www.alphalinux.org/>.
 
+config 64_BIT
+	def_bool y
+
 config MMU
 	bool
 	default y
Index: arch/ia64/Kconfig
===================================================================
RCS file: /var/cvs/linux-2.6/arch/ia64/Kconfig,v
retrieving revision 1.2
diff -u -p -r1.2 Kconfig
--- arch/ia64/Kconfig	12 Aug 2003 19:10:49 -0000	1.2
+++ arch/ia64/Kconfig	2 Sep 2003 14:24:46 -0000
@@ -18,6 +18,9 @@ config IA64
 	  page at <http://www.linuxia64.org/> and a mailing list at
 	  [email protected].
 
+config 64_BIT
+	def_bool y
+
 config MMU
 	bool
 	default y
Index: arch/mips/Kconfig
===================================================================
RCS file: /var/cvs/linux-2.6/arch/mips/Kconfig,v
retrieving revision 1.2
diff -u -p -r1.2 Kconfig
--- arch/mips/Kconfig	12 Aug 2003 19:10:50 -0000	1.2
+++ arch/mips/Kconfig	2 Sep 2003 14:24:47 -0000
@@ -11,6 +11,9 @@ config MIPS64
 	  64-bit processing, otherwise say N.  You must say Y for kernels for
 	  SGI IP27 (Origin 200 and 2000).  If in doubt say N.
 
+config 64_BIT
+	def_bool MIPS64
+
 config MIPS32
 	bool
 	depends on MIPS64 = 'n'
Index: arch/parisc/Kconfig
===================================================================
RCS file: /var/cvs/linux-2.6/arch/parisc/Kconfig,v
retrieving revision 1.6
diff -u -p -r1.6 Kconfig
--- arch/parisc/Kconfig	23 Aug 2003 02:56:56 -0000	1.6
+++ arch/parisc/Kconfig	2 Sep 2003 14:24:47 -0000
@@ -103,6 +103,9 @@ config PARISC64
 	  enable this option otherwise. The 64bit kernel is significantly bigger
 	  and slower than the 32bit one.
 
+config 64_BIT
+	def_bool PARISC64
+
 config PDC_NARROW
 	bool "32-bit firmware"
 	depends on PARISC64
Index: arch/ppc64/Kconfig
===================================================================
RCS file: /var/cvs/linux-2.6/arch/ppc64/Kconfig,v
retrieving revision 1.3
diff -u -p -r1.3 Kconfig
--- arch/ppc64/Kconfig	23 Aug 2003 02:46:30 -0000	1.3
+++ arch/ppc64/Kconfig	2 Sep 2003 14:24:47 -0000
@@ -3,6 +3,9 @@
 # see Documentation/kbuild/kconfig-language.txt.
 #
 
+config 64_BIT
+	def_bool y
+
 config MMU
 	bool
 	default y
Index: arch/s390/Kconfig
===================================================================
RCS file: /var/cvs/linux-2.6/arch/s390/Kconfig,v
retrieving revision 1.2
diff -u -p -r1.2 Kconfig
--- arch/s390/Kconfig	12 Aug 2003 19:10:57 -0000	1.2
+++ arch/s390/Kconfig	2 Sep 2003 14:24:47 -0000
@@ -40,6 +40,9 @@ config ARCH_S390X
 	  Select this option if you have a 64 bit IBM zSeries machine
 	  and want to use the 64 bit addressing mode.
 
+config 64_BIT
+	def_bool ARCH_S390X
+
 config ARCH_S390_31
 	bool
 	depends on ARCH_S390X = 'n'
Index: arch/sparc64/Kconfig
===================================================================
RCS file: /var/cvs/linux-2.6/arch/sparc64/Kconfig,v
retrieving revision 1.3
diff -u -p -r1.3 Kconfig
--- arch/sparc64/Kconfig	12 Aug 2003 19:10:57 -0000	1.3
+++ arch/sparc64/Kconfig	2 Sep 2003 14:24:47 -0000
@@ -5,6 +5,9 @@
 
 mainmenu "Linux/UltraSPARC Kernel Configuration"
 
+config 64_BIT
+	def_bool y
+
 config MMU
 	bool
 	default y
Index: arch/x86_64/Kconfig
===================================================================
RCS file: /var/cvs/linux-2.6/arch/x86_64/Kconfig,v
retrieving revision 1.2
diff -u -p -r1.2 Kconfig
--- arch/x86_64/Kconfig	12 Aug 2003 19:10:59 -0000	1.2
+++ arch/x86_64/Kconfig	2 Sep 2003 14:24:47 -0000
@@ -16,6 +16,9 @@ config X86_64
 	  Port to the x86-64 architecture. x86-64 is a 64-bit extension to the
 	  classical 32-bit x86 architecture. For details see http://www.x86-64.org
 
+config 64_BIT
+	def_bool y
+
 config X86
 	bool
 	default y
Index: drivers/scsi/Kconfig
===================================================================
RCS file: /var/cvs/linux-2.6/drivers/scsi/Kconfig,v
retrieving revision 1.3
diff -u -p -r1.3 Kconfig
--- drivers/scsi/Kconfig	25 Aug 2003 19:49:06 -0000	1.3
+++ drivers/scsi/Kconfig	2 Sep 2003 14:24:48 -0000
@@ -355,7 +355,7 @@ source "drivers/scsi/aic7xxx/Kconfig.aic
 # All the I2O code and drivers do not seem to be 64bit safe.
 config SCSI_DPT_I2O
 	tristate "Adaptec I2O RAID support "
-	depends on !X86_64 && SCSI
+	depends on !64_BIT && SCSI
 	help
 	  This driver supports all of Adaptec's I2O based RAID controllers as 
 	  well as the DPT SmartRaid V cards.  This is an Adaptec maintained
@@ -416,7 +416,7 @@ config SCSI_AM53C974
 
 config SCSI_MEGARAID
 	tristate "AMI MegaRAID support"
-	depends on PCI && SCSI
+	depends on PCI && SCSI && !64_BIT
 	help
 	  This driver supports the AMI MegaRAID 418, 428, 438, 466, 762, 490
 	  and 467 SCSI host adapters.

-- 
"It's not Hollywood.  War is real, war is primarily not about defeat or
victory, it is about death.  I've seen thousands and thousands of dead bodies.
Do you think I want to have an academic debate on this subject?" -- Robert Fisk
#1 lore raw
Quoted 1 line · Matthew Wilcox

What do people think of CONFIG_64_BIT? It saves us from using

Yes! Please!

Though I would of course make it CONFIG_64BIT ;-)

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Quoted 1 line · Matthew Wilcox

What do people think of CONFIG_64_BIT? It saves us from using

Yes! Please!

Though I would of course make it CONFIG_64BIT ;-)

#2 lore raw
Quoted 6 lines · Jeff Garzik
Quoted 1 line · Matthew Wilcox

What do people think of CONFIG_64_BIT? It saves us from using

Yes! Please!

Though I would of course make it CONFIG_64BIT ;-)

Or CONFIG_LINUX64? :-)

Quoted 2 lines
Quoted 1 line · Matthew Wilcox

What do people think of CONFIG_64_BIT? It saves us from using

Why do some many mails from lkml have duplicated contents?

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]

In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds

#3 lore raw
Quoted 1 line · Geert Uytterhoeven

Why do some many mails from lkml have duplicated contents?

Might be a problem on your side, I didn't see that.

Andreas.

Signature · 4 lines
Andreas Schwab, SuSE Labs, [email protected]
SuSE Linux AG, Deutschherrnstr. 15-19, D-90429 Nürnberg
Key fingerprint = 58CA 54C7 6D53 942B 1756  01D3 44D5 214B 8276 4ED5
"And now for something completely different."
#4 lore raw
Quoted 10 lines · Andreas Schwab
Quoted 1 line · Geert Uytterhoeven

Why do some many mails from lkml have duplicated contents?

Might be a problem on your side, I didn't see that.

Andreas.

No, see the "vger's today hickups" thread.