Problems with PCMCIA (Texas Instruments PCI1410)
can you please retest with -test4 and russell's yenta patches?
http://patches.arm.linux.org.uk/pcmcia/yenta-20030817.tar
if that doesn't work out: could you please add these lines to in yenta_socket.c?
in yenta_events(), before return:printk("yenta_events: socket %p, cb: %x, csc: %x\n", socket, cb_event, csc);
in yenta_get_status(), before return:printk("yenta_get_status: socket %p, state: %x\n", socket, state);
and then report the output on boot, when removig, inserting, cardctl eject, cardctl insert? this could give an idea what's going on....
rgds
-daniel
Quoted 2 lines · Daniel Ritz
can you please retest with -test4 and russell's yenta patches?
http://patches.arm.linux.org.uk/pcmcia/yenta-20030817.tar
I've just created http://pcmcia.arm.linux.org.uk/ to document the currently known problems and to contain patches for them.
Quoted 2 lines
if that doesn't work out: could you please add these lines to in
yenta_socket.c?
What seems to happen is that some peoples cardbus bridges don't report the "card insert" interrupt, or they do and the socket status does not report that the card is inserted.
I'll review all the reports thus far this afternoon and expand the problem description on the website.
Signature · 2 lines
Russell King ([email protected]) The developer of ARM Linux http://www.arm.linux.org.uk/personal/aboutme.html
Re: Problems with PCMCIA (Texas Instruments PCI1450)
Quoted 3 lines · Russell King
I've just created http://pcmcia.arm.linux.org.uk/ to document the currently known problems and to contain patches for them.
ok, I've built and booted linux 2.5.70 to 2.5.75, and it seems that the detecting the aironet card as a memory_cs device happens in 2.5.74
_but_ I did come across a number of other weirdnesses on the way.
1. 2.5.71 was missing a #include <linux/cpu.h> in flow.c
2. when i patched 2.5.70 to 2.5.71 and then 2.5.72 somehow SMP became enabled, and this stopped pcmcia from working at all
3. my /etc/defaults/pcmcia contained the line PCIC-i82365, which seemed not tp cause 2.5.70 any problems, but after that i had to change that to yenta before pcmicia started successfully
I assume the next step is to apply the 2.5.74 patch in pieces ?
cheers
Sven
-----------------
from dmesg 2.5.73
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
PCI: Found IRQ 9 for device 00:02.0
PCI: Sharing IRQ 9 with 00:05.0
PCI: Sharing IRQ 9 with 01:00.0
Yenta IRQ list 00b8, PCI irq9
Socket status: 30000006
PCI: Found IRQ 9 for device 00:02.1
Yenta IRQ list 00b8, PCI irq9
Socket status: 30000010
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x3c0-0x3df 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
airo: Doing fast bap_reads
airo: MAC enabled eth1 0:40:96:33:e:a4
eth1: index 0x05: Vcc 5.0, Vpp 5.0, irq 3, io 0x0100-0x013f
bad: scheduling while atomic!
Call Trace: [<c0117666>] schedule+0x3b6/0x3c0 [<e0852bea>] sendcommand+0xaa/0xe0 [airo] [<e0852b0c>] issuecommand+0x5c/0x90 [airo] [<e08530ca>] PC4500_accessrid+0x4a/0x90 [airo] [<e0853177>] PC4500_readrid+0x67/0x120 [airo] [<c0175118>] padzero+0x28/0x30
-----------------
dmesg from 2.5.74
Yenta IRQ list 0000, PCI irq9
Socket status: 30000006
PCI: Found IRQ 9 for device 0000:00:02.1
ti113x: Routing card interrupts to PCI
Yenta IRQ list 0000, PCI irq9
Socket status: 30000010
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x3c0-0x3df 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
----------------
the differences between the 2 .config files
root@sven:/usr/src/2.5# diff linux-2.5.73/.config linux-2.5.74/.config 174d173 < CONFIG_BINFMT_AOUT=m 175a175
Quoted 1 line
CONFIG_BINFMT_AOUT=m
178a179,183
Quoted 5 lines
# Generic Driver Options
#
#CONFIG_FW_LOADERis not set#
350d354
< # CONFIG_SCSI_NCR53C7xx is not set
352d355
< # CONFIG_SCSI_NCR53C8XX is not set
711d713
< # CONFIG_MOUSE_PS2_SYNAPTICS is not set
747a750
Quoted 1 line
#
CONFIG_I2C_PROSAVAGEis not set
758a762
Quoted 1 line
#
CONFIG_I2C_ALI1535is not set
774a779
Quoted 1 line
#
CONFIG_SENSORS_LM78is not set
1266a1272
Quoted 1 line
#
CONFIG_USB_AX8817Xis not set
Re: Problems with PCMCIA (Texas Instruments PCI1450)
Quoted 6 lines · Sven Dowideit
Quoted 3 lines · Russell King
I've just created http://pcmcia.arm.linux.org.uk/ to document the currently known problems and to contain patches for them.
ok, I've built and booted linux 2.5.70 to 2.5.75, and it seems that the detecting the aironet card as a
memory_csdevice happens in 2.5.74
Ok, there's two sets of changes between .73 and .74 which touch PCMCIA. The first is 2.5.73-bk1-bk2 and the second is 2.5.73-bk8-bk9.
ftp.kernel.org:/pub/linux/kernel/v2.5/snapshots/incr/patch-2.5.73-bk1-bk2.bz2 ftp.kernel.org:/pub/linux/kernel/v2.5/snapshots/incr/patch-2.5.73-bk8-bk9.bz2
I'm not going to try to guess which caused the problem, but I'm intrigued to know which is causing the problems.
Thanks for your efforts so far tracking the problem down.
Signature · 5 lines
Russell King ([email protected]) http://www.arm.linux.org.uk/personal/ Linux kernel maintainer of: 2.6 ARM Linux - http://www.arm.linux.org.uk/ 2.6 PCMCIA - http://pcmcia.arm.linux.org.uk/ 2.6 Serial core
Re: Problems with PCMCIA (Texas Instruments PCI1450)
In reply to Sven Dowideitok, now i can reproduce the problem on my ti1410 too. on boot detection works fine with an UP kernel and fails with an SMP kernel. thanx for the hint.
i go to look at the csets a bit and try to find out more.... (i think i know which change...)
Quoted 101 lines · Sven Dowideit
Quoted 3 lines · Russell King
I've just created http://pcmcia.arm.linux.org.uk/ to document the currently known problems and to contain patches for them.
ok, I've built and booted linux 2.5.70 to 2.5.75, and it seems that the detecting the aironet card as a
memory_csdevice happens in 2.5.74_but_ I did come across a number of other weirdnesses on the way.
1. 2.5.71 was missing a #include <linux/cpu.h> inflow.c
2. when i patched 2.5.70 to 2.5.71 and then 2.5.72 somehow SMP became enabled, and this stopped pcmcia from working at all
3. my/etc/defaults/pcmciacontained the line PCIC-i82365, which seemed not tp cause 2.5.70 any problems, but after that i had to change that to yenta before pcmicia started successfullyI assume the next step is to apply the 2.5.74 patch in pieces ?
cheers
Sven-----------------
from dmesg 2.5.73Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
PCI: Found IRQ 9 for device 00:02.0
PCI: Sharing IRQ 9 with 00:05.0
PCI: Sharing IRQ 9 with 01:00.0
Yenta IRQ list 00b8, PCI irq9
Socket status: 30000006
PCI: Found IRQ 9 for device 00:02.1
Yenta IRQ list 00b8, PCI irq9
Socket status: 30000010
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x3c0-0x3df 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
airo: Doing fastbap_reads
airo: MAC enabled eth1 0:40:96:33:e:a4
eth1: index0x05: Vcc 5.0, Vpp 5.0, irq 3, io 0x0100-0x013f
bad: scheduling while atomic!Call Trace: [<c0117666>] schedule+0x3b6/0x3c0 [<e0852bea>] sendcommand+0xaa/0xe0 [airo] [<e0852b0c>] issuecommand+0x5c/0x90 [airo] [<e08530ca>] PC4500_accessrid+0x4a/0x90 [airo] [<e0853177>] PC4500_readrid+0x67/0x120 [airo] [<c0175118>] padzero+0x28/0x30-----------------
dmesg from 2.5.74Yenta IRQ list 0000, PCI irq9
Socket status: 30000006
PCI: Found IRQ 9 for device 0000:00:02.1
ti113x: Routing card interrupts to PCI
Yenta IRQ list 0000, PCI irq9
Socket status: 30000010
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x3c0-0x3df 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.----------------
the differences between the 2 .config filesroot@sven:/usr/src/2.5# diff linux-2.5.73/.config linux-2.5.74/.config 174d173 < CONFIG_BINFMT_AOUT=m 175a175Quoted 1 line
CONFIG_BINFMT_AOUT=m178a179,183
Quoted 5 lines
# Generic Driver Options
#
#CONFIG_FW_LOADERis not set#
350d354
< #CONFIG_SCSI_NCR53C7xxis not set
352d355
< #CONFIG_SCSI_NCR53C8XXis not set
711d713
< #CONFIG_MOUSE_PS2_SYNAPTICSis not set
747a750Quoted 1 line
#
CONFIG_I2C_PROSAVAGEis not set758a762
Quoted 1 line
#
CONFIG_I2C_ALI1535is not set774a779
Quoted 1 line
#
CONFIG_SENSORS_LM78is not set
1266a1272Quoted 1 line
#
CONFIG_USB_AX8817Xis not set
A message that is not in the archive (sent off-list or not yet received): [email protected]
Re: Problems with PCMCIA (Texas Instruments PCI1450)
Quoted 9 lines · Russell King
Quoted 6 lines · Daniel Ritz
ok, now i can reproduce the problem on my ti1410 too. on boot detection works fine with an UP kernel and fails with an SMP kernel. thanx for the hint.
i go to look at the csets a bit and try to find out more.... (i think i know which change...)
Care to provide a hint?
yes. just tested. patch below makes on boot detection with a SMP kernel working again (for me). which is nice, but i don't see why it is better that way...
===== cs.c 1.56 vs edited =====
cs.c renamed from drivers/pcmcia/cs.c +3 -1
@@ -316,7 +316,6 @@wait_for_completion (&socket->thread_done);BUG_ON (!socket->thread); -pcmcia_parse_events (socket,SS_DETECT );return 0 ; }
@@ -1524,6 +1523,9 @@if (client ==NULL )return CS_OUT_OF_RESOURCE ; +if (++s->real_clients ==1 ) +pcmcia_parse_events (s,SS_DETECT ); + *handle = client; client->state &= ~CLIENT_UNBOUND ; client->Socket = s;
Re: Problems with PCMCIA (Texas Instruments PCI1450)
Quoted 6 lines · Daniel Ritz
Quoted 5 lines · Russell King
Quoted 4 lines · Daniel Ritz
ok, now i can reproduce the problem on my ti1410 too. on boot detection works fine with an UP kernel and fails with an SMP kernel. thanx for the hint.
Quoted 8 lines
Quoted 4 lines
Quoted 2 lines
i go to look at the csets a bit and try to find out more.... (i think i know which change...)
Care to provide a hint?
yes. just tested. patch below makes on boot detection with a SMP kernel working again (for me). which is nice, but i don't see why it is better that way...
Ok, now I need to hear from Sven (and others) to see if this patch fixes their problems. Also, are these other people running a SMP kernel as well?
Meanwhile, I'm wondering if we have a timing problem here. Can you check whether adding a mdelay(1) just after the BUG_ON in the original code fixes the problem?
Quoted 22 lines
=====
cs.c1.56 vs edited =====cs.c renamed from drivers/pcmcia/cs.c +3
-1@@ -316,7 +316,6 @@wait_for_completion (&socket->thread_done);BUG_ON (!socket->thread); -pcmcia_parse_events (socket,SS_DETECT );return 0 ; }@@ -1524,6 +1523,9 @@if (client ==NULL )return CS_OUT_OF_RESOURCE ; +if (++s->real_clients ==1 ) +pcmcia_parse_events (s,SS_DETECT ); + *handle = client; client->state &= ~CLIENT_UNBOUND ; client->Socket = s;
Signature · 5 lines
Russell King ([email protected]) http://www.arm.linux.org.uk/personal/ Linux kernel maintainer of: 2.6 ARM Linux - http://www.arm.linux.org.uk/ 2.6 PCMCIA - http://pcmcia.arm.linux.org.uk/ 2.6 Serial core
Re: Problems with PCMCIA (Texas Instruments PCI1450)
Quoted 16 lines · Russell King
Quoted 6 lines · Daniel Ritz
Quoted 5 lines · Russell King
Quoted 4 lines · Daniel Ritz
ok, now i can reproduce the problem on my ti1410 too. on boot detection works fine with an UP kernel and fails with an SMP kernel. thanx for the hint.
Quoted 8 lines
Quoted 4 lines
Quoted 2 lines
i go to look at the csets a bit and try to find out more.... (i think i know which change...)
Care to provide a hint?
yes. just tested. patch below makes on boot detection with a SMP kernel working again (for me). which is nice, but i don't see why it is better that way...
Quoted 7 lines
Ok, now I need to hear from Sven (and others) to see if this patch fixes their problems. Also, are these other people running a SMP kernel as well?
Meanwhile, I'm wondering if we have a timing problem here. Can you check whether adding a mdelay(1) just after the
BUG_ONin the original code fixes the problem?
no effect. i tried that before with loooong sleeps (1 second) w/o any effect...
Quoted 32 lines
Quoted 23 lines
=====
cs.c1.56 vs edited =====cs.c renamed from drivers/pcmcia/cs.c +3
-1@@ -316,7 +316,6 @@wait_for_completion (&socket->thread_done);BUG_ON (!socket->thread); -pcmcia_parse_events (socket,SS_DETECT );return 0 ; }@@ -1524,6 +1523,9 @@if (client ==NULL )return CS_OUT_OF_RESOURCE ; +if (++s->real_clients ==1 ) +pcmcia_parse_events (s,SS_DETECT ); + *handle = client; client->state &= ~CLIENT_UNBOUND ; client->Socket = s;Signature · 5 lines
Russell King ([email protected]) http://www.arm.linux.org.uk/personal/ Linux kernel maintainer of: 2.6 ARM Linux - http://www.arm.linux.org.uk/ 2.6 PCMCIA - http://pcmcia.arm.linux.org.uk/ 2.6 Serial core
[PATCH] Re: Problems with PCMCIA (Texas Instruments PCI1450)
In reply to Russell KingQuoted 12 lines · Russell King
Quoted 11 lines · Daniel Ritz
Quoted 9 lines · Russell King
Quoted 6 lines · Daniel Ritz
ok, now i can reproduce the problem on my ti1410 too. on boot detection works fine with an UP kernel and fails with an SMP kernel. thanx for the hint.
i go to look at the csets a bit and try to find out more.... (i think i know which change...)
Care to provide a hint?
Quoted 7 lines
Quoted 3 lines
yes. just tested. patch below makes on boot detection with a SMP kernel working again (for me). which is nice, but i don't see why it is better that way...
Ok, now I need to hear from Sven (and others) to see if this patch fixes their problems. Also, are these other people running a SMP kernel as well?
Ok, I've updated pcmcia.arm.linux.org.uk with a couple of patches which should solve the real cause of problem - a nice race condition. I'm including the patch here - can people which this problem check whether it solves the problem on their hardware?
I'd like to hear back from people who have been affected by this bug before I push this patch to Linus.
Thanks.
drivers/pcmcia/cs.c +14 -12
@@ -474,7 +474,7 @@DEBUG (1 ,"cs: shutdown_socket(%p)\n" , s);/* Blank out the socket state */ - s->state &=SOCKET_PRESENT |SOCKET_SETUP_PENDING ; + s->state &=SOCKET_PRESENT |SOCKET_INUSE ; s->socket = dead_socket; s->ops->init (s); s->irq.AssignedIRQ = s->irq.Config =0 ;
@@ -657,7 +657,6 @@pcmcia_error (skt,"unsupported voltage key.\n" );return CS_BAD_TYPE ; } - skt->state |=SOCKET_PRESENT ; skt->socket.flags =SS_DEBOUNCED ; skt->ops->set_socket (skt, &skt->socket);
@@ -678,22 +677,23 @@ {int ret; -if (!try_module_get (skt->owner)) +if (!cs_socket_get (skt))return CS_NO_CARD ; ret =socket_setup (skt, setup_delay);if (ret ==CS_SUCCESS ) { + skt->state |=SOCKET_PRESENT ;#ifdef CONFIG_CARDBUS if (skt->state &SOCKET_CARDBUS ) {cb_alloc (skt); skt->state |=SOCKET_CARDBUS_CONFIG ; }#endif send_event (skt,CS_EVENT_CARD_INSERTION ,CS_EVENT_PRI_LOW ); skt->socket.flags &= ~SS_DEBOUNCED ; }else {socket_shutdown (skt); -module_put (skt->owner); +cs_socket_put (skt); }return ret;
@@ -741,10 +741,8 @@ } skt->socket.flags &= ~SS_DEBOUNCED ; }else { -unsigned int old_state = skt->state;socket_shutdown (skt); -if (old_state &SOCKET_PRESENT ) -module_put (skt->owner); +cs_socket_put (skt); } skt->state &= ~SOCKET_SUSPEND ;
@@ -755,7 +753,7 @@static void socket_remove (struct pcmcia_socket *skt) {socket_shutdown (skt); -module_put (skt->owner); +cs_socket_put (skt); }/*
@@ -1346,8 +1344,6 @@ status->CardState |=CS_EVENT_PM_SUSPEND ;if (!(s->state &SOCKET_PRESENT ))return CS_NO_CARD ; -if (s->state &SOCKET_SETUP_PENDING ) - status->CardState |=CS_EVENT_CARD_INSERTION ;/* Get info from the PRR, if necessary */ if (handle->Function ==BIND_FN_ALL ) {
@@ -1524,6 +1520,10 @@if (client ==NULL )return CS_OUT_OF_RESOURCE ; +/* +* Prevent this racing with a card insertion. +*/ +down (&s->skt_sem); *handle = client; client->state &= ~CLIENT_UNBOUND ; client->Socket = s;
@@ -1555,13 +1555,15 @@ client, client->Socket, client->dev_info);if (client->EventMask &CS_EVENT_REGISTRATION_COMPLETE )EVENT (client,CS_EVENT_REGISTRATION_COMPLETE ,CS_EVENT_PRI_LOW ); -if ((s->state &SOCKET_PRESENT ) && - !(s->state &SOCKET_SETUP_PENDING )) { + +if ((s->state & (SOCKET_PRESENT |SOCKET_CARDBUS )) ==SOCKET_PRESENT ) {if (client->EventMask &CS_EVENT_CARD_INSERTION )EVENT (client,CS_EVENT_CARD_INSERTION ,CS_EVENT_PRI_LOW );else client->PendingEvents |=CS_EVENT_CARD_INSERTION ; } + +up (&s->skt_sem);return CS_SUCCESS ; }/* register_client */
drivers/pcmcia/cs_internal.h +21 -1
@@ -99,7 +99,7 @@/* Flags in socket state */ #define SOCKET_PRESENT 0x0008 -#define SOCKET_SETUP_PENDING 0x0010 +#define SOCKET_INUSE 0x0010#define SOCKET_SHUTDOWN_PENDING 0x0020#define SOCKET_RESET_PENDING 0x0040#define SOCKET_SUSPEND 0x0080
@@ -109,6 +109,26 @@#define SOCKET_CARDBUS 0x8000#define SOCKET_CARDBUS_CONFIG 0x10000 +static inline int cs_socket_get (struct pcmcia_socket *skt) +{ +int ret; + +WARN_ON (skt->state &SOCKET_INUSE ); + + ret =try_module_get (skt->owner); +if (ret) + skt->state |=SOCKET_INUSE ; +return ret; +} + +static inline void cs_socket_put (struct pcmcia_socket *skt) +{ +if (skt->state &SOCKET_INUSE ) { + skt->state &= ~SOCKET_INUSE ; +module_put (skt->owner); + } +} +#define CHECK_HANDLE (h) \ (((h) == NULL) || ((h)->client_magic != CLIENT_MAGIC))
Signature · 5 lines
Russell King ([email protected]) http://www.arm.linux.org.uk/personal/ Linux kernel maintainer of: 2.6 ARM Linux - http://www.arm.linux.org.uk/ 2.6 PCMCIA - http://pcmcia.arm.linux.org.uk/ 2.6 Serial core
Re: [PATCH] Re: Problems with PCMCIA (Texas Instruments PCI1450)
Quoted 2 lines · Russell King
I'd like to hear back from people who have been affected by this bug before I push this patch to Linus.
it fixes my pcmcia problem at startup :)
and for bonus points, it also when plugged into the docking station pcmcia cards (which is one up on the last 2.4 i used)
when i get a chance I will put the pc-card bridge back into my dual processor piii, and see how that goes too.. is the PC-Card code supposed to work on SMP?
Quoted 1 line
Thanks.
no, thank you!
in the process of playing around with cardctl eject, insert and pulling out the card without warning i have gotten the following..
airo: Doing fast bap_reads
airo: MAC enabled eth1 0:40:96:33:e:a4
eth1: index 0x05: Vcc 5.0, Vpp 5.0, irq 3, io 0x0100-0x013f nfs warning: mount version older than kernel
nfs: server 10.10.10.10 not responding, still trying
nfs: server 10.10.10.10 OK
nfs: server 10.10.10.10 not responding, still trying
RPC: sendmsg returned error 101
nfs: RPC call returned error 101
RPC: sendmsg returned error 101
nfs: RPC call returned error 101
RPC: sendmsg returned error 101
nfs: RPC call returned error 101
airo: Probing for PCI adapterskobject_register failed for airo (-17)
Call Trace: [<c0214da9>] kobject_register+0x59/0x60 [<c023c1e2>] bus_add_driver+0x52/0xb0 [<c021ef7e>] pci_register_driver+0x6e/0xa0 [<e08670e8>] airo_init_module+0xe8/0x10d [airo] [<c0139f0f>] sys_init_module+0x12f/0x260 [<c010b0db>] syscall_call+0x7/0xb
airo: Finished probing for PCI adapters airo: Doing fast bap_reads airo: MAC enabled eth1 0:40:96:33:e:a4 eth1: index 0x05: Vcc 5.0, Vpp 5.0, irq 3, io 0x0100-0x013f airo: Probing for PCI adapters kobject_register failed for airo (-17) Call Trace: [<c0214da9>] kobject_register+0x59/0x60 [<c023c1e2>] bus_add_driver+0x52/0xb0 [<c021ef7e>] pci_register_driver+0x6e/0xa0 [<e08670e8>] airo_init_module+0xe8/0x10d [airo] [<c0139f0f>] sys_init_module+0x12f/0x260 [<c010b0db>] syscall_call+0x7/0xb
airo: Finished probing for PCI adapters
airo: Doing fast bap_reads
airo: MAC enabled eth1 0:40:96:33:e:a4
eth1: index 0x05: Vcc 5.0, Vpp 5.0, irq 3, io 0x0100-0x013f irq 9: nobody cared!
Call Trace: [<c010d45a>] __report_bad_irq+0x2a/0x90 [<c010d550>] note_interrupt+0x70/0xb0 [<c010d890>] do_IRQ+0x160/0x1a0 [<c010ba48>] common_interrupt+0x18/0x20 [<e087007b>] yenta_get_status+0x4b/0x110 [yenta_socket] [<c010d3e0>] handle_IRQ_event+0x30/0x80 [<c010d7e7>] do_IRQ+0xb7/0x1a0 [<c010ba48>] common_interrupt+0x18/0x20 [<e0828253>] apm_bios_call_simple+0x83/0x100 [apm] [<e0828437>] apm_do_idle+0x27/0x80 [apm] [<e0828572>] apm_cpu_idle+0xa2/0x140 [apm] [<c0105000>] _stext+0x0/0x70 [<c0108c8b>] cpu_idle+0x3b/0x50 [<c03ea919>] start_kernel+0x199/0x1d0 [<c03ea490>] unknown_bootoption+0x0/0x120
handlers:
[<c0260f90>] (ide_intr+0x0/0x1e0) [<e08708b0>] (yenta_interrupt+0x0/0x40 [yenta_socket]) [<e08708b0>] (yenta_interrupt+0x0/0x40 [yenta_socket]) Disabling IRQ #9
Quoted 3 lines
diff -ur
ref/drivers/pcmcia/cs.clinux/drivers/pcmcia/cs.c
--ref/drivers/pcmcia/cs.cTue Aug 5 11:19:39 2003
+++linux/drivers/pcmcia/cs.cSat Sep 6 15:07:25 2003
Re: [PATCH] Re: Problems with PCMCIA (Texas Instruments PCI1450)
In reply to Russell KingQuoted 11 lines
Quoted 3 lines
Ok, now I need to hear from Sven (and others) to see if this patch fixes their problems. Also, are these other people running a SMP kernel as well?
Ok, I've updated pcmcia.arm.linux.org.uk with a couple of patches which should solve the real cause of problem - a nice race condition. I'm including the patch here - can people which this problem check whether it solves the problem on their hardware?
I'd like to hear back from people who have been affected by this bug before I push this patch to Linus.
Seems to work for me. Thanks! :-)
Signature · 2 lines
If voting could change the system, it would be illegal. If not voting could change the system, it would be illegal.
Quoted 4 lines · Daniel Ritz
can you please retest with -test4 and russell's yenta patches?
http://patches.arm.linux.org.uk/pcmcia/yenta-20030817.tarif that doesn't work out: could you please add these lines to in
yenta_socket.c?
(this is the TI PCI1450)
mmm it seems to work fine every time except if i boot with the card inserted. (same result as test4 only)
this log (with the yenta patch) is from insertting and removing the card
- cardctl insert and remove look the same..
sven......
Linux version 2.6.0-test4 (root@sven) (gcc version 3.3.2 20030812 (Debian prerelease)) #5 Thu Aug 28 08:02:48 EST 2003
Video mode to be used for restore is f00
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fffec00 (ACPI data)
BIOS-e820: 000000001fffec00 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 511MB LOWMEM available.
On node 0 totalpages: 131056
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126960 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
IBM machine detected. Enabling interrupts during APM calls. IBM machine detected. Disabling SMBus accesses.
ACPI: RSDP (v000 PTLTD ) @0x000f7120
ACPI: RSDT (v001 PTLTD RSDT 0x06041150 LTP 0x00000000) @0x1fff4c5d
ACPI: FADT (v001 IBM TP-T21 0x06041150 0x00000000) @ 0x1fffeb65
ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06041150 LTP 0x00000001) @ 0x1fffebd9
ACPI: DSDT (v001 IBM TP-T21 0x06041150 MSFT 0x0100000c) @0x00000000
ACPI: MADT not present
Building zonelist for node : 0
Kernel command line: BOOT_IMAGE=linux26 ro root=303
Local APIC disabled by BIOS -- reenabling.
Could not enable APIC!
Initializing CPU#0
PID hash table entries: 2048 (order 11: 16384 bytes) Detected 846.433 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1675.26 BogoMIPS
Memory: 515036k/524224k available (2045k kernel code, 8444k reserved, 788k data, 160k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) -> /dev
-> /dev/console
-> /root
CPU: After generic identify, caps: 0383f9ff 00000000 00000000
00000000
CPU: After vendor identify, caps: 0383f9ff 00000000 00000000
00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040
CPU: Intel Pentium III (Coppermine) stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
PM: Adding info for No Bus:legacy
Initializing RT netlink socket
PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=7
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
BIO: pool of 256 setup, 14Kb (56 bytes/bio)
biovec pool[0]: 1 bvecs: 256 entries (12 bytes)
biovec pool[1]: 4 bvecs: 256 entries (48 bytes)
biovec pool[2]: 16 bvecs: 256 entries (192 bytes)
biovec pool[3]: 64 bvecs: 256 entries (768 bytes)
biovec pool[4]: 128 bvecs: 256 entries (1536 bytes)
biovec pool[5]: 256 bvecs: 256 entries (3072 bytes)
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PM: Adding info for No Bus:pci0000:00
PM: Adding info for pci:0000:00:00.0
PM: Adding info for pci:0000:00:01.0
PM: Adding info for pci:0000:00:02.0
PM: Adding info for pci:0000:00:02.1
PM: Adding info for pci:0000:00:03.0
PM: Adding info for pci:0000:00:03.1
PM: Adding info for pci:0000:00:05.0
PM: Adding info for pci:0000:00:07.0
PM: Adding info for pci:0000:00:07.1
PM: Adding info for pci:0000:00:07.2
PM: Adding info for pci:0000:00:07.3
PM: Adding info for pci:0000:01:00.0
PM: Adding info for No Bus:pci0000:08
PCI: Discovered primary peer bus 08 [IRQ]
PCI: Using IRQ router PIIX [8086/7110] at 0000:00:07.0
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
fb0: VGA16 VGA frame buffer device
pty: 256 Unix98 ptys configured
SBF: ACPI BOOT descriptor is wrong length (39)
SBF: Simple Boot Flag extension found and enabled.
SBF: Setting boot flags 0x1
cpufreq: Intel(R) SpeedStep(TM) for this chipset not (yet) available. ikconfig 0.5 with /proc/ikconfig
VFS: Disk quotas dquot_6.5.1
Journalled Block Device driver loaded
Limiting direct PCI/PCI transfers.
Real Time Clock Driver v1.11a
Using anticipatory scheduling elevator
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
PM: Adding info for platform:floppy0
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1c00-0x1c07, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1c08-0x1c0f, BIOS settings: hdc:DMA, hdd:piohda: IC25T048ATDA05-0, ATA DISK drive
PM: Adding info for No Bus:ide0
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
PM: Adding info for ide:0.0
hdc: MATSHITADVD-ROM SR-8175, ATAPI CD/DVD-ROM drive
PM: Adding info for No Bus:ide1
ide1 at 0x170-0x177,0x376 on irq 15
PM: Adding info for ide:1.0
hda: max request size: 128KiB
hda: 93759120 sectors (48004 MB) w/1806KiB Cache, CHS=65535/16/63
hda: hda1 hda2 hda3 hda4 < hda5 hda6 >end_request: I/O error, dev hdc, sector 0
hdc: ATAPI 24X DVD-ROM drive, 512kB Cache
Uniform CD-ROM driver Revision: 3.12
ide-floppy driver 0.99.newide
mice: PS/2 mouse device common for all mice
input: PS/2 Generic Mouse on isa0060/serio1
serio: i8042 AUX port at 0x60,0x64 irq 12
input: AT Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
I2O Core - (C) Copyright 1999 Red Hat Software
I2O: Event thread created as pid 10
i2o: Checking for PCI I2O controllers...
I2O configuration manager v 0.04.
(C) Copyright 1999 Red Hat Software
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 160k freed
EXT3 FS on hda3, internal journal
drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub drivers/usb/core/usb.c: registered new driver usbkbd drivers/usb/input/usbkbd.c: :USB HID Boot Protocol keyboard driver airo: Probing for PCI adapters airo: Finished probing for PCI adapters apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) PCI: Found IRQ 11 for device 0000:00:03.0 PCI: Sharing IRQ 11 with 0000:00:03.1
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 0000:00:03.0: 3Com PCI 3c556B Laptop Hurricane at 0x1800. Vers LK1.1.19 kjournald starting. Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds
EXT3 FS on hda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
Intel PCIC probe: not found.
PCI: Found IRQ 9 for device 0000:00:02.0
PCI: Sharing IRQ 9 with 0000:00:05.0
PCI: Sharing IRQ 9 with 0000:01:00.0
Yenta: CardBus bridge found at 0000:00:02.0 [1014:0130]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta: ISA IRQ list 00b8, PCI irq9
Socket status: 30000010
PCI: Found IRQ 9 for device 0000:00:02.1
Yenta: CardBus bridge found at 0000:00:02.1 [1014:0130]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta: ISA IRQ list 00b8, PCI irq9
Socket status: 30000006yenta_get_status: socket dfafdc00, state: 30000410yenta_get_status: socket dfafdc00, state: 30000410yenta_get_status: socket dfafd000, state: 30000086yenta_get_status: socket dfafdc00, state: 30000410yenta_get_status: socket dfafdc00, state: 30000419
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x3c0-0x3df 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.yenta_get_status: socket dfafdc00, state: 30000419yenta_get_status: socket dfafdc00, state: 30000419yenta_get_status: socket dfafdc00, state: 30000419yenta_get_status: socket dfafdc00, state: 30000459yenta_get_status: socket dfafdc00, state: 30000459yenta_events: socket dfafdc00, cb: 0, csc: 8yenta_events: socket dfafd000, cb: 0, csc: 0yenta_events: socket dfafdc00, cb: 6, csc: 0yenta_events: socket dfafd000, cb: 0, csc: 0yenta_get_status: socket dfafdc00, state: 3000011fyenta_events: socket dfafdc00, cb: c, csc: 0yenta_events: socket dfafd000, cb: 0, csc: 0yenta_events: socket dfafdc00, cb: 4, csc: 0yenta_events: socket dfafd000, cb: 0, csc: 0yenta_get_status: socket dfafdc00, state: 30000086yenta_events: socket dfafdc00, cb: 0, csc: 8yenta_events: socket dfafd000, cb: 0, csc: 0yenta_events: socket dfafdc00, cb: 6, csc: 0yenta_events: socket dfafd000, cb: 0, csc: 0yenta_get_status: socket dfafdc00, state: 30000410yenta_get_status: socket dfafdc00, state: 30000410yenta_get_status: socket dfafdc00, state: 30000410yenta_get_status: socket dfafdc00, state: 30000419yenta_get_status: socket dfafdc00, state: 30000419yenta_get_status: socket dfafdc00, state: 30000419yenta_get_status: socket dfafdc00, state: 30000459yenta_get_status: socket dfafdc00, state: 30000459yenta_get_status: socket dfafdc00, state: 30000459
airo: Doing fast bap_reads
airo: MAC enabled eth1 0:40:96:33:e:a4
eth1: index 0x05: Vcc 5.0, Vpp 5.0, irq 3, io 0x0100-0x013fyenta_events: socket dfafdc00, cb: 0, csc: 8yenta_events: socket dfafd000, cb: 0, csc: 0yenta_events: socket dfafdc00, cb: 6, csc: 0yenta_events: socket dfafd000, cb: 0, csc: 0yenta_get_status: socket dfafdc00, state: 3000001fyenta_events: socket dfafdc00, cb: 4, csc: 0yenta_events: socket dfafd000, cb: 0, csc: 0yenta_get_status: socket dfafdc00, state: 3000028ayenta_events: socket dfafdc00, cb: 4, csc: 0yenta_events: socket dfafd000, cb: 0, csc: 0yenta_get_status: socket dfafdc00, state: 3000028eyenta_events: socket dfafdc00, cb: c, csc: 0yenta_events: socket dfafd000, cb: 0, csc: 0yenta_events: socket dfafdc00, cb: 4, csc: 0yenta_events: socket dfafd000, cb: 0, csc: 0yenta_get_status: socket dfafdc00, state: 30000286yenta_events: socket dfafdc00, cb: 0, csc: 8yenta_events: socket dfafd000, cb: 0, csc: 0yenta_events: socket dfafdc00, cb: 6, csc: 0yenta_events: socket dfafd000, cb: 0, csc: 0yenta_get_status: socket dfafdc00, state: 30000610yenta_get_status: socket dfafdc00, state: 30000610yenta_get_status: socket dfafdc00, state: 30000610yenta_get_status: socket dfafdc00, state: 30000619yenta_get_status: socket dfafdc00, state: 30000619yenta_get_status: socket dfafdc00, state: 30000619yenta_get_status: socket dfafdc00, state: 30000659yenta_get_status: socket dfafdc00, state: 30000659yenta_get_status: socket dfafdc00, state: 30000659
airo: Probing for PCI adapterskobject_register failed for airo (-17)
Call Trace: [<c0201f59>] kobject_register+0x59/0x60 [<c02281b2>] bus_add_driver+0x52/0xb0 [<c022862f>] driver_register+0x2f/0x40 [<c0184094>] create_proc_entry+0x84/0xd0 [<c020bd5c>] pci_register_driver+0x5c/0x90 [<e08790e8>] airo_init_module+0xe8/0x10d [airo] [<c0133d98>] sys_init_module+0x118/0x230 [<c010ae9b>] syscall_call+0x7/0xb
airo: Finished probing for PCI adapters airo: Doing fast bap_reads airo: MAC enabled eth1 0:40:96:33:e:a4 eth1: index 0x05: Vcc 5.0, Vpp 5.0, irq 3, io 0x0100-0x013f yenta_events: socket dfafdc00, cb: 0, csc: 8 yenta_events: socket dfafd000, cb: 0, csc: 0 yenta_events: socket dfafdc00, cb: 6, csc: 0 yenta_events: socket dfafd000, cb: 0, csc: 0 yenta_get_status: socket dfafdc00, state: 3000021f yenta_events: socket dfafdc00, cb: 4, csc: 0 yenta_events: socket dfafd000, cb: 0, csc: 0 yenta_get_status: socket dfafdc00, state: 3000028a yenta_events: socket dfafdc00, cb: 4, csc: 0 yenta_events: socket dfafd000, cb: 0, csc: 0 yenta_get_status: socket dfafdc00, state: 3000028e yenta_events: socket dfafdc00, cb: c, csc: 0 yenta_events: socket dfafd000, cb: 0, csc: 0 yenta_events: socket dfafdc00, cb: 4, csc: 0 yenta_events: socket dfafd000, cb: 0, csc: 0 yenta_get_status: socket dfafdc00, state: 30000286 yenta_get_status: socket dfafdc00, state: 30000286 yenta_events: socket dfafdc00, cb: 0, csc: 8 yenta_events: socket dfafd000, cb: 0, csc: 0 yenta_events: socket dfafdc00, cb: 6, csc: 0 yenta_events: socket dfafd000, cb: 0, csc: 0 yenta_get_status: socket dfafdc00, state: 30000610 yenta_get_status: socket dfafdc00, state: 30000610 yenta_get_status: socket dfafdc00, state: 30000610 yenta_get_status: socket dfafdc00, state: 30000619 yenta_get_status: socket dfafdc00, state: 30000619 yenta_get_status: socket dfafdc00, state: 30000619 yenta_get_status: socket dfafdc00, state: 30000659 yenta_get_status: socket dfafdc00, state: 30000659 airo: Probing for PCI adapters kobject_register failed for airo (-17) Call Trace: [<c0201f59>] kobject_register+0x59/0x60 [<c02281b2>] bus_add_driver+0x52/0xb0 [<c022862f>] driver_register+0x2f/0x40 [<c0184094>] create_proc_entry+0x84/0xd0 [<c020bd5c>] pci_register_driver+0x5c/0x90 [<e08790e8>] airo_init_module+0xe8/0x10d [airo] [<c0133d98>] sys_init_module+0x118/0x230 [<c010ae9b>] syscall_call+0x7/0xb
airo: Finished probing for PCI adapters
airo: Doing fast bap_reads
airo: MAC enabled eth1 0:40:96:33:e:a4
eth1: index 0x05: Vcc 5.0, Vpp 5.0, irq 3, io 0x0100-0x013fyenta_events: socket dfafdc00, cb: 0, csc: 8yenta_events: socket dfafd000, cb: 0, csc: 0yenta_events: socket dfafdc00, cb: 6, csc: 0yenta_events: socket dfafd000, cb: 0, csc: 0yenta_get_status: socket dfafdc00, state: 3000021f