Skip to contentSkip to conversation

Hardware supported by the kernel

DISCUSSION Ch & Ph Drapela 9 participants 18 messages Sep 6, 2003 – Sep 16, 2003

lore
Share & tools
lore
#0 lore raw

Hi everyone!

As maybe im gonna buy a new pc i would like to know if these components are supported by the kernel
- a pentium 4 2.8 GHz with hyprthreading
- an ASUS P4P000Deluxe Mainboard
- Kingston RAM for my mAinboard (th asus one)
- a S-ATA HD
- an ATI Gapiccard
- the other things should work (DVD-Rom and CD RW)

Thanks for an answer!

Yannick

#1 lore raw

Hi Yannick :)

* Ch & Ph Drapela <[email protected]> dixit:

Quoted 1 line

- a pentium 4 2.8 GHz with hyprthreading

I think that it is...

Quoted 1 line

- an ATI Gapiccard

I have an ATI card (128 LT Pro) and it's fully supported. IMHO
all ATI cards are.

Quoted 1 line

- the other things should work (DVD-Rom and CD RW)

Y have a Plextor Premium CDrecorder and it works. Any ATAPI DVD
should be supported. See the cdrecord homepage to see supported and unsupported CD-recorders. I recommend Plextor, anyway.

Raúl Núñez de Arenas Coronado

Signature · 2 lines
Linux Registered User 88736
http://www.pleyades.net & http://raul.pleyades.net/
#2 lore raw
Quoted 3 lines · DervishD
Quoted 1 line

- an ATI Gapiccard

I have an ATI card (128 LT Pro) and it's fully supported. IMHO
all ATI cards are.

Depends on your definition of 'supported'. Recent ATI cards[*] will only work in accelerated 3d using their binary only driver.

Dave

[*] Except the 9200

Signature · 1 line
 Dave Jones     http://www.codemonkey.org.uk
#3 lore raw

Hi Dave :)

* Dave Jones <[email protected]> dixit:

Quoted 5 lines
Quoted 3 lines
Quoted 1 line

- an ATI Gapiccard

I have an ATI card (128 LT Pro) and it's fully supported. IMHO
all ATI cards are.

Depends on your definition of 'supported'. Recent ATI cards[*] will only work in accelerated 3d using their binary only driver.

A couple of months ago someone on this list said that ATI no
longer provides information about their graphics cards, so when I say 'supported' I'm speaking of my particular model, that it's really supported (is a quite old model). When I said 'all ATI cards' I was talking about older models, because I forgot that ATI no longer supports Linux.

My mistake, sorry. BTW: what graphics cards manufacturer currently
supports Linux?. I need to buy a new graphic card for a friend (AGP) and I don't know what one to buy :(((

Raúl Núñez de Arenas Coronado

Signature · 2 lines
Linux Registered User 88736
http://www.pleyades.net & http://raul.pleyades.net/
#4 lore raw
Quoted 13 lines · DervishD
Quoted 5 lines
Quoted 3 lines
Quoted 1 line

- an ATI Gapiccard

I have an ATI card (128 LT Pro) and it's fully supported. IMHO
all ATI cards are.

Depends on your definition of 'supported'. Recent ATI cards[*] will only work in accelerated 3d using their binary only driver.

A couple of months ago someone on this list said that ATI no
longer provides information about their graphics cards, so when I say 'supported' I'm speaking of my particular model, that it's really supported (is a quite old model). When I said 'all ATI cards' I was talking about older models, because I forgot that ATI no longer supports Linux.

Quoted 3 lines

My mistake, sorry. BTW: what graphics cards manufacturer currently
supports Linux?. I need to buy a new graphic card for a friend (AGP) and I don't know what one to buy :(((

in the performance/gamer end of the market, you're screwed.

ATI - Radeon 9200 is AGPx8, supported by open driver (Based on R200 core)
All other current cards need binary only driver.
Nvidia - Binary only for accelerated 3d.
Matrox - Not exactly a speed demon any more in the 3d market. Open
drivers though. Not sure about Parhelia.
SiS - Cards like the Xabre are quite cheap, though unsupported,
though SiS folks did seemto wnat to help at one point, then when quiet.
S3 - Again, poorly performing, specs/drivers are out there.

who did I miss ?

Dave

Signature · 1 line
 Dave Jones     http://www.codemonkey.org.uk
#5 lore raw

Hi Dave :)

* Dave Jones <[email protected]> dixit:

Quoted 4 lines
Quoted 3 lines

My mistake, sorry. BTW: what graphics cards manufacturer currently
supports Linux?. I need to buy a new graphic card for a friend (AGP) and I don't know what one to buy :(((

in the performance/gamer end of the market, you're screwed.

I supposed :(( The problem is that this friend have never used
Linux at all, and wants a Knoppix, so any card supported by Knoppix, both with open and binary only drivers will do. But I would largely prefer a card with open drivers. I don't feel like supporting closed hardware with my money (well, my friend's money in this case).

Speed shouldn't be an issue, since this computer is fairly old,
and the graphics card replacement is just because the PC failed recently and although we identified the problem (seemed to be the HD), the graphics card does... well, weird things...

OTOH, I'm worried because if someday I must replace *my* graphic
card, I want one that gives me speed in 2D, no more. I spend 99% of my time in the console, so I need... 1D so to say ;))). When I run X I just want decent performance, not a high-end card. Any card supported by X with some speed and an open driver will do.

Quoted 2 lines

ATI - Radeon 9200 is AGPx8, supported by open driver (Based on R200 core)
All other current cards need binary only driver.

Well, if the Radeon 9200 has open driver, it may be the card.

Quoted 1 line

Nvidia - Binary only for accelerated 3d.

I will NEVER buy an NVidia. I will NEVER put a binary only driver
in my box.

Quoted 2 lines

Matrox - Not exactly a speed demon any more in the 3d market. Open
drivers though. Not sure about Parhelia.

Speed is not an issue. If a Matrox is open hardware (well, more
or less) it may be a candidate too.

Quoted 1 line

S3 - Again, poorly performing, specs/drivers are out there.

S3 are slow cards, generally, but I don't mind. If it works in
text mode I'm done. If it works with X (without bells and whistles, no KDE maybe, slow window moving, etc...) it may do too. I would like to see movies under my X, but if I must sacrifice some functionality in order to support open drivers, I will do.

Thanks a lot for the info ;)

Raúl Núñez de Arenas Coronado

Signature · 2 lines
Linux Registered User 88736
http://www.pleyades.net & http://raul.pleyades.net/
#6 lore raw
In reply to Dave Jones
Quoted 3 lines · Dave Jones

SiS - Cards like the Xabre are quite cheap, though unsupported,
though SiS folks did seemto wnat to help at one point, then when quiet.

SiS have also since spun off their graphics division. Someone is porting the SiS drivers to current DRI at the moment.

Quoted 1 line

S3 - Again, poorly performing, specs/drivers are out there.

Drivers for 4.2 release by VIA need porting to 4.3

Quoted 1 line

who did I miss ?

Trident - documentation is public, nobody has tackled a driver

Intel - older stuff is slow, newer onboard video is actually pretty good and Intel support this stuff seriously. Its not a radeon but it players cube perfectly well 8) Presumably intel will eventually fuse the CPU and graphics into one chip.

VIA - XFree 4.2 drivers need porting over to 4.3. Original 4.2 code provided by VIA. I've got glxgears kind of working but didnt have time to go further and fix the span bugs and the locking v acceleration.

#7 lore raw

Hi Alan :)

* Alan Cox <[email protected]> dixit:

Quoted 2 lines
Quoted 1 line

who did I miss ?

Trident - documentation is public, nobody has tackled a driver

Trident cards are still sold? Here in Spain is difficult to get
one (except a second-hand maybe).

Quoted 4 lines

Intel - older stuff is slow, newer onboard video is actually pretty good and Intel support this stuff seriously. Its not a radeon but it players cube perfectly well 8) Presumably intel will eventually fuse the CPU and graphics into one chip.

I tested the 810 a time ago. It was not slow (2D at least, didn't
check 3D), but it was buggy (even in Windows, so Linux drivers weren't blame of this).

Raúl Núñez de Arenas Coronado

Signature · 2 lines
Linux Registered User 88736
http://www.pleyades.net & http://raul.pleyades.net/
#8 lore raw
Quoted 6 lines · DervishD

* Alan Cox <[email protected]> dixit:

Quoted 2 lines
Quoted 1 line

who did I miss ?

Trident - documentation is public, nobody has tackled a driver

Trident cards are still sold? Here in Spain is difficult to get
one (except a second-hand maybe).

Trident appears in the EPIA (but not EPIA-M) onboard video for one. So its still around as an embedded item.

Quoted 8 lines
Quoted 4 lines

Intel - older stuff is slow, newer onboard video is actually pretty good and Intel support this stuff seriously. Its not a radeon but it players cube perfectly well 8) Presumably intel will eventually fuse the CPU and graphics into one chip.

I tested the 810 a time ago. It was not slow (2D at least, didn't
check 3D), but it was buggy (even in Windows, so Linux drivers weren't blame of this).

With XFree 4.3 810 seems pretty solid 2D/3D nowdays, and the later stuff 830/845/... is also a fair bit faster.

#9 lore raw

Hi Alan :)

* Alan Cox <[email protected]> dixit:

Quoted 5 lines
Quoted 3 lines
Quoted 1 line

Trident - documentation is public, nobody has tackled a driver

Trident cards are still sold? Here in Spain is difficult to get
one (except a second-hand maybe).

Trident appears in the EPIA (but not EPIA-M) onboard video for one. So its still around as an embedded item.

Oh, yes, I didn't remember that, thanks :))

Quoted 5 lines
Quoted 3 lines

I tested the 810 a time ago. It was not slow (2D at least, didn't
check 3D), but it was buggy (even in Windows, so Linux drivers weren't blame of this).

With XFree 4.3 810 seems pretty solid 2D/3D nowdays, and the later stuff 830/845/... is also a fair bit faster.

Well, then that another candidate. Thanks a lot for the info. How
goes your Welsh ;))?

Raúl Núñez de Arenas Coronado

Signature · 2 lines
Linux Registered User 88736
http://www.pleyades.net & http://raul.pleyades.net/
#10 lore raw
Quoted 5 lines · DervishD
Quoted 2 lines

With XFree 4.3 810 seems pretty solid 2D/3D nowdays, and the later stuff 830/845/... is also a fair bit faster.

Well, then that another candidate. Thanks a lot for the info. How
goes your Welsh ;))?

I used to read Alan's diary.

While learning Welsh is not bad per se, writing public diary in Welsh defeats diary purpose. Bad, bad Alan ;) ;) ;) --
vda

#11 lore raw

Hi VDA :)

* insecure <[email protected]> dixit:

Quoted 5 lines
Quoted 4 lines
Quoted 2 lines

With XFree 4.3 810 seems pretty solid 2D/3D nowdays, and the later stuff 830/845/... is also a fair bit faster.

Well, then that another candidate. Thanks a lot for the info. How
goes your Welsh ;))?

I used to read Alan's diary.

Me too ;)

Quoted 2 lines

While learning Welsh is not bad per se, writing public diary in Welsh defeats diary purpose. Bad, bad Alan ;) ;) ;)

Oh, well, it is his diary ;)) I think that he already does enough
for us maintaining the kernel. The diary was a good addenda, but if he wants to practice his welsh with it, he has the right to do so. But anyway, bad Alan, bad, bad ;)))))

Raúl Núñez de Arenas Coronado

Signature · 2 lines
Linux Registered User 88736
http://www.pleyades.net & http://raul.pleyades.net/
#12 lore raw
Quoted 14 lines · DervishD

Hi VDA :)

* insecure <[email protected]> dixit:

Quoted 5 lines
Quoted 4 lines
Quoted 2 lines

With XFree 4.3 810 seems pretty solid 2D/3D nowdays, and the later stuff 830/845/... is also a fair bit faster.

Well, then that another candidate. Thanks a lot for the info. How
goes your Welsh ;))?

I used to read Alan's diary.

Me too ;)

Quoted 2 lines

While learning Welsh is not bad per se, writing public diary in Welsh defeats diary purpose. Bad, bad Alan ;) ;) ;)

Quoted 6 lines

Oh, well, it is his diary ;)) I think that he already does enough
for us maintaining the kernel. The diary was a good addenda, but if he wants to practice his welsh with it, he has the right to do so. But anyway, bad Alan, bad, bad ;)))))

Raúl Núñez de Arenas Coronado

No worse than Raúl writing his in Spanish would be. Welsh
may be a niche but it is a valid niche. I understand that the worlds longest running television serial drama (here in the US we call them soap operas) is in Welsh. Of course if it is Welse means i can't read it :( Maybe this will provide the impetus for babelfish to support Welsh. I expect Alan writing his diary in Welsh is good practice so, Good Alan, good, good :)

Signature · 5 lines
________________________________________________________________
	J.W. Schultz            Pegasystems Technologies
	email address:		[email protected]

		Remember Cernan and Schmitt
#13 lore raw

Hi JW :)

* jw schultz <[email protected]> dixit:

Quoted 7 lines
Quoted 6 lines
Quoted 2 lines

While learning Welsh is not bad per se, writing public diary in Welsh defeats diary purpose. Bad, bad Alan ;) ;) ;)

Oh, well, it is his diary ;)) I think that he already does enough
for us maintaining the kernel. The diary was a good addenda, but if he wants to practice his welsh with it, he has the right to do so. But anyway, bad Alan, bad, bad ;)))))

No worse than Raúl writing his in Spanish would be.

In fact that's why I write my free software in english. I really
love my mother language, and I try to write and speak a good spanish (how did you know I'm spanish-speaking?), but english is more extended, as far as software is concerned of course. Since in Spain we have many languages (Catalán, Gallego, Euskera, Valenciano, Mallorquín, etc...) I have most respect with languages everywhere. The languages lead to a bit of miscommunication, but lead too to cultural richness, so I think they're good.

Quoted 3 lines

I expect Alan
writing his diary in Welsh is good practice so, Good Alan, good, good :)

You're right ;))) But I think Alan is a bad boy because I no
longer can read his diary, and I liked it a lot ;)) I'm planning learning Gaelic (at some point in the future), and it's not very different from welsh ;) Seriously, Alan has all the right to write, speak and whatever more in Welsh, and if I don't understand what he's saying and I'm interested, rather than forcing him to speak in spanish I should learn a bit of welsh. But at the end all is a question of understanding, and the most languages one knows, the most people will be able to communicate with. And I'm saying all this with my poor english ;))

BTW, I think Alan is really a good fellow, I like him ;))

Raúl Núñez de Arenas Coronado

Signature · 2 lines
Linux Registered User 88736
http://www.pleyades.net & http://raul.pleyades.net/
#14 lore raw

Hi!

Quoted 8 lines
Quoted 3 lines

I expect Alan
writing his diary in Welsh is good practice so, Good Alan, good, good :)

You're right ;))) But I think Alan is a bad boy because I no
longer can read his diary, and I liked it a lot ;)) I'm planning learning Gaelic (at some point in the future), and it's not very different from welsh ;) Seriously, Alan has all the right to write,

Well, perhaps someone should step up and provide english translation for Alan's diary? :-)
Pavel

Signature · 2 lines
				Pavel
Written on sharp zaurus, because my Velo1 broke. If you have Velo you don't need...
#15 lore raw
In reply to Dave Jones
Quoted 2 lines · Dave Jones

Matrox - Not exactly a speed demon any more in the 3d market. Open
drivers though. Not sure about Parhelia.

LOL. Buying a G550 was the biggest mistake I ever did. DVI-D support only with a binary only module and still a heavy bug in it (basically it takes a 90 second break when starting X).

IMHO The best supported 3D gfx chip for Linux comes from nVidia. Yes, it is binary only and people invented the "TAINTED" flag to report this, but it is a fast, vendor-supported driver which works fine in 99% of all configurations which are one gfx board, one or two displays. (yes, I know it has some issues with power management on laptops). But all other vendors are worse and nvidia at least cares.

If you just want 2D on an VGA, you can basically buy anything starting at $19.

Regards
Henning

Signature · 8 lines
Dipl.-Inf. (Univ.) Henning P. Schmiedehausen          INTERMETA GmbH
[email protected]        +49 9131 50 654 0   http://www.intermeta.de/

Java, perl, Solaris, Linux, xSP Consulting, Web Services 
freelance consultant -- Jakarta Turbine Development  -- hero for hire

"Dominate!! Dominate!! Eat your young and aggregate! I have grotty silicon!" 
      -- AOL CD when played backwards  (User Friendly - 200-10-15)
#16 lore raw
Quoted 2 lines · Henning> Dave Jones <[email protected]> writes:
Quoted 2 lines

Matrox - Not exactly a speed demon any more in the 3d market. Open drivers though. Not sure about Parhelia.

Henning> LOL. Buying a G550 was the biggest mistake I ever did. DVI-D Henning> support only with a binary only module and still a heavy bug Henning> in it (basically it takes a 90 second break when starting X).

I've got a couple of G200s and a G450 as my main display. I'm more interested in wonderfully sharp 2-D display, not so much in 3-D. Everything I've read says that the Matrox still makese the best 2d boards...

John

#17 lore raw

If you use one monitor and VGA, yes. But then again, this is the 21st century.

I'm using my G550 exclusively for Linux and 2D. And still I need a proprietary binary module (but noone from LKLM cries wolf because it's a user space module) to access the DVI-D ports and the second port.

Regards
Henning

Quoted 14 lines · John Stoffel
Quoted 2 lines · Henning> Dave Jones <[email protected]> writes:
Quoted 2 lines

Matrox - Not exactly a speed demon any more in the 3d market. Open drivers though. Not sure about Parhelia.

Henning> LOL. Buying a G550 was the biggest mistake I ever did. DVI-D Henning> support only with a binary only module and still a heavy bug Henning> in it (basically it takes a 90 second break when starting X).

I've got a couple of G200s and a G450 as my main display. I'm more interested in wonderfully sharp 2-D display, not so much in 3-D. Everything I've read says that the Matrox still makese the best 2d boards...

John

Signature · 8 lines
Dipl.-Inf. (Univ.) Henning P. Schmiedehausen          INTERMETA GmbH
[email protected]        +49 9131 50 654 0   http://www.intermeta.de/

Java, perl, Solaris, Linux, xSP Consulting, Web Services 
freelance consultant -- Jakarta Turbine Development  -- hero for hire

"Dominate!! Dominate!! Eat your young and aggregate! I have grotty silicon!" 
      -- AOL CD when played backwards  (User Friendly - 200-10-15)