nasm over gas?
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 8 lines · Richard B. Johnson
I strongly suggest that if you have an interest in assembly, you cultivate that interest. Soon most all mundane coding will be performed by machine from a specification written by "Sales". The only "real" programming will be done by those who can make the interface between the hardware and the "coding machine". That's assembly!
I have a long standing dispute with one of my friend: once he has
said 'asm is dead - every one is using C/C++ now'.
Those I wasn't able to counter this claim. TSR programmes gone
together with DOS, and ordinary desktops started challenging expensive workstations.
But little bit later I caught an example: Palm OS. Yes. A lot of
stuff is written in Asm. Why? Because *size does matter*: size == price, bigger application - more expensive it is for your customer. C was not able to compete with Asm.
But now we have hand-helds/mobiles which do run Windoz/Linux. Run
them almost unmodified/unstripped. Cool. C/C++ rules. Windoz CE with VBA - dream of idiot.
Asm dead again? No-o-o-o. L3/L4 switch we are doing utilizes special
micro-controller, which can be programmed in dialect of MIPS assembler. It has fast RAM for 4K of insn's and executes in real-time. I didn't saw C compiler for this - but this is really exotic example. But still example - Asm is far from being dead.
What will be next? In my short carrier I saw as Asm was dying three
times. But I beleive it will reborn over and over again ;-)))
Quoted 26 lines · Ihar 'Philips' Filipau
Quoted 8 lines · Richard B. Johnson
I strongly suggest that if you have an interest in assembly, you cultivate that interest. Soon most all mundane coding will be performed by machine from a specification written by "Sales". The only "real" programming will be done by those who can make the interface between the hardware and the "coding machine". That's assembly!
I have a long standing dispute with one of my friend: once he has
said 'asm is dead - every one is using C/C++ now'.Those I wasn't able to counter this claim. TSR programmes gone
together with DOS, and ordinary desktops started challenging expensive workstations.But little bit later I caught an example: Palm OS. Yes. A lot of
stuff is written in Asm. Why? Because *size does matter*: size == price, bigger application - more expensive it is for your customer. C was not able to compete with Asm.But now we have hand-helds/mobiles which do run Windoz/Linux. Run
them almost unmodified/unstripped. Cool. C/C++ rules. Windoz CE with VBA
- dream of idiot.
Quoted 9 lines
Asm dead again? No-o-o-o. L3/L4 switch we are doing utilizes special
micro-controller, which can be programmed in dialect of MIPS assembler. It has fast RAM for 4K of insn's and executes in real-time. I didn't saw C compiler for this - but this is really exotic example. But still example - Asm is far from being dead.What will be next? In my short carrier I saw as Asm was dying three
times. But I beleive it will reborn over and over again ;-)))
Yes. I once saw a ".sig" that said "FORTRAN is dead". We still have physicists and mathematicians that wouldn't use anything else. Use the best tool for the job. If any company gives you the chance to learn a new tool (for free), use that chance.
Cheers,
Dick Johnson
Penguin : Linux version 2.4.22 on an i686 machine (794.73 BogoMips).
Note 96.31% of all statistics are fiction.
Quoted 4 lines
Yes. I once saw a ".sig" that said "FORTRAN is dead". We still have physicists and mathematicians that wouldn't use anything else. Use the best tool for the job. If any company gives you the chance to learn a new tool (for free), use that chance.
Better yet, I have seen news paper ads for companies looking for experienced cobol programmers.
Regards,
Maciej
Quoted 2 lines
I have a long standing dispute with one of my friend: once he has
said 'asm is dead - every one is using C/C++ now'.
Stating that asm is dead is not realizing that it is really important in some niches. Niches which must be in asm to provide the best for the customers. This is and will be common in 'programming language wars'.
Dead technologies are not used. Asm is used, therefore Asm is not dead. This is the definition, and the sentence to counter 'asm is dead'.
Quoted 2 lines
What will be next? In my short carrier I saw as Asm was dying three
times. But I beleive it will reborn over and over again ;-)))
Pascal will be next I think. Or any other language that does not resist the trends. C/Java/Python - Those guys are surfing the wave of modern programming, and rapid development. Others like cobol, fortran, etc. are just unknown, and thus some people think they are dead.
Another thing:
Programming languages do not die,
They just fade away
Regards,
Maciej
Quoted 8 lines · Maciej Soltysiak
Quoted 2 lines
I have a long standing dispute with one of my friend: once he has
said 'asm is dead - every one is using C/C++ now'.Stating that asm is dead is not realizing that it is really important in some niches. Niches which must be in asm to provide the best for the customers. This is and will be common in 'programming language wars'.
Dead technologies are not used. Asm is used, therefore Asm is not dead. This is the definition, and the sentence to counter 'asm is dead'.
Assembly can't be dead since it is used as an internal step to produce machine runnable code eg by gcc. Also, assembly is a very good thing, eg some coders can code 4K intro with phong shaded rotating 3D objects etc ;-) But if you see, they spend even months to produce 4K machine runnable code. No doubt: it's REALLY optimized for both of speed and size, but you can't do this for commercial softwares, because it is not portable (if you target more architectures for example), it's longer to develope and also it's more difficult to maintain. Personally I'm enjoying coding in asm, and I've done several bigger projects. However today I would not do this in asm. Not because assembly sucks or whatever, just because I've not enough free time to do BIG projects in assembly then maintain it ... But several areas are open, eg my Enterprise-128 emulator being developed using assembly optimized parts and gains several dozens of percent speed improvement. Of course these routines are coded in C as well to be able to compile on non-x86 CPUs as well. I beleive assembly can be very useful when eg a heavily used function can be coded in assembly for being faster even if it means multiple rewritings for several CPUs even in the x86 CPU familiy. Eg: if you can produce more bandwidth by 50% even by coding much more time than in C, you will be blessed. But it does not mean that the WHOLE system should be written in assembly ...
Quoted 3 lines
Pascal will be next I think. Or any other language that does not resist the trends. C/Java/Python - Those guys are surfing the wave of modern programming, and rapid development. Others like cobol, fortran,
C is a good midway between 'very high' level languages and assembly, at least IMHO. But eg Java will be NEVER my friend, it's a nightmare to waste system resources (I CAN'T get the idea why some people want to write an MP3 player in Java for example. Maybe (s)he has got too fast CPU ...)
- Gábor (larta'H)
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 10 lines · William Lee Irwin III
Quoted 2 lines · Ihar 'Philips' Filipau
e.g. C-- project: something like C, where you can operate with
registers just like another variables. Under DOS was producing .com files witout any overhead: program with only 'intmain(){ return 0; }' was optimized to one byte 'ret' ;-) But sure it was not complete C implementation.There is already a C-- project and it is unrelated to your suggestion.
Actually I have tryed to find the project I knew long time ago. But let say - it was pre internet era.
I beleive C-- was distributed as a shareware. I cannot be sure about
licensing - I come from USSR ;-)
[ ...removing the dust of time from my archives... ]
[ ...@#$%^&* it is archived with arj - VMware... ]
[ Wow - it has name! Sphinx C-- - and Google has some docs on-line
http://www.goosee.com/cmm/c--doc.htm (go directly to http://www.goosee.com/cmm/c--doc.htm#Expressions) ]
[ Home page is http://www.goosee.com/cmm/ ]
Sample from my archive follows.
Watch the comment "RUN FILE SIZE" - 457 bytes. Far from ideal - but
already 'very good'.
/*
NAME: FIRE.C--
INFO: Written by Midnight.
Conversion to C-- (and a little palette messing) by SPHINX.
DESCRIPTION: This program displays a fire like simulation on a
VGA 320x200 256 colour screen.
RUN FILE SIZE: 457 bytes.
*/
?use80386
?resize FALSE
?assumeDSSS TRUE
?include "VIDEO.H--"
?include "VGA.H--"
?include "RANDOM.H--"
?include "KEYCODES.H--"
byte palette[768];
// byte pic = FROM "c--.cut";
word F;
word LowLimit;
void SetCols ()
byte N;
{
/*
BX = 0;
do {
SI = BX+BX+BX;
palette[SI] = BL >> 2;
palette[SI+1] = BL >> 3;
palette[SI+2] = 0;
BX++;
} while( BX < 256 );*/
palette[0]=0;
palette[1]=0;
palette[2]=0;
BX = 0;
do {
DI = BX+BX+BX;
AX = BX * 64 / 85;
DL = AL;
palette[DI+3] = DL;
palette[DI+3+1] = 0;
palette[DI+3+2] = 0;
palette[DI+3+85+85+85] = 63;
palette[DI+3+85+85+85+1] = DL;
palette[DI+3+85+85+85+2] = 0;
palette[DI+3+85+85+85+85+85+85] = 63;
palette[DI+3+85+85+85+85+85+85+1] = 63;
palette[DI+3+85+85+85+85+85+85+2] = DL;
BX++;
} while( BX < 85 );SETVGAPALETTE( ,0,256,#palette);
}
void AddFire (word N)
{
loop(N)
{
AX = RAND()%10+1;
SI = AX+AX;
AX = RAND()%298 + 64010;
DI = AX;
AL = RAND()&127 + 128;
loop(SI)
{
ESBYTE[DI] = AL;
ESBYTE[DI+640] = AL;
DI++;
}
}
}void CopyAvg ()
{
DI = 1280;
do {
BX = 2;
do {
AX = ESBYTE[DI+BX-2] + ESBYTE[DI+BX+2] + ESBYTE[DI+BX] +
ESBYTE[DI+BX+640] / 4;
AX = AX + ESBYTE[DI+BX-640] >> 1;
IF( AL > 128 )
AL-=2;
ELSE IF( AL > 3)
AL -=4;
ELSE
AL = 0;
AH = AL;
ESWORD[DI+BX-1280] = AX;
ESWORD[DI+BX-1280+320] = AX;
BX += 2;
} while( BX < 318 );
DI += 640;
} while( DI < 320*204 );
}void main ()
{
@ SETVIDEOMODE(byte vid_320x200_256);
SetCols();
ES = 0xA000;
F = 0;
do {
AddFire(F / 32 + 1);
CopyAvg();
IF( F < 512 )
F++;
LowLimit = F >> 2 + 128 >> 2;
// IF( F % 80 == 0 )
// overimage19(80,90,#pic,0);
} while( BIOSKEYCHECK() == 0 );do {BIOSREADKEY();
} while( BIOSKEYCHECK() != 0 );@ SETVIDEOMODE(byte vid_text80c);
}
/* end of FIRE.C-- */