2.6.0-test4-mm5 SMP got stuck when configuring the NIC
test4-mm5 seems to work on UP, but got stuck on SMP when the initscripts ran pump.
It responded to sysrq+S, & sysrq+U,
so it seems block io was still working.
There was no fsck on the next boot into plain 2.6.0-test4.
sysrq+P showed:
Pid 38, comm: pump
EIP at __mod_timer+0x34/0x270do_IRQcommon_interruptdel_timerdel_timer_syncschedule_timeoutprocess_timeoutdev_closedev_change_flagsdevinet_ioctlinet_ioctlsock_ioctlsyscall_callauth_domain_drop
sysrq+T
showed pump as the R process, syslogd Z, and others S.
I'll try without the elv-insertion-fix thing later today.
Helge Hafting
Re: 2.6.0-test4-mm5 SMP (and mm6 and plain test5) got stuck during boot
2.6.0-test4-mm4, mm6 and plain 2.6.0-test5 are all useless on my dual celeron. The machine get stuck when initscripts tries to configure networking. I can break
out of that with ctrl+c, but then it gets
stuck on something else shortly thereafter,
so I can't get as far as logging in.
The machine runs debian testing, and is fine with
2.6.0-test4.
Helge Hafting
Re: 2.6.0-test4-mm5 SMP (and mm6 and plain test5) got stuck during boot
Quoted 7 lines · Helge Hafting
2.6.0-test4-mm4, mm6 and plain 2.6.0-test5 are all useless on my dual celeron. The machine get stuck when initscripts tries to configure networking. I can break
out of that with ctrl+c, but then it gets
stuck on something else shortly thereafter,
so I can't get as far as logging in.
Please try test5-mm1. If it still gets stuck then use sysrq-P and sysrq-T to work out where it is hanging.
Re: 2.6.0-test4-mm5 SMP (and mm6 and plain test5) got stuck during boot
On Wed, Sep 10, 2003 at 09:55:59AM -0700, Andrew Morton wrote:
[...]
Quoted 2 lines
Please try test5-mm1. If it still gets stuck then use sysrq-P and sysrq-T to work out where it is hanging.
test5-mm1 came up, I'm using it for writing this message. :-)
Helge Hafting