Skip to contentSkip to conversation

Memory mapped IO vs Port IO

DISCUSSION Matthew Wilcox 3 participants 3 messages Sep 11, 2003

lore
Share & tools
lore
#0 lore raw

There's a lot of drivers in the tree that allow you to access the device either via IO port space or IO mem space. Here's some examples:

config SCSI_SYM53C8XX_IOMAPPED
bool "use normal IO"
depends on SCSI_SYM53C8XX_2
help
If you say Y here, the driver will preferently use normal IO rather than memory mapped IO.

config 8139TOO_PIO
bool "Use PIO instead of MMIO"
depends on 8139TOO
help
This instructs the driver to use programmed I/O ports (PIO) instead of PCI shared memory (MMIO). This can possibly solve some problems in case your mainboard has memory consistency issues. If unsure, say N.

config TULIP_MMIO
bool "Use PCI shared mem for NIC registers"
depends on TULIP
help
Use PCI shared memory for the NIC registers, rather than going through the Tulip's PIO (programmed I/O ports). Faster, but could produce obscure bugs if your mainboard has memory controller timing issues. If in doubt, say N.

As you can see, everybody asks the question differently, and sometimes you should answer Y and sometimes N to get MMIO. There are other drivers which don't ask the question at all and you have to edit the .c file to turn it on or off. I'll also note the acronym `PIO' is ambiguous -- sometimes it refers to Port IO and sometimes to Programmed IO (which can be a memory access).

Personally, when I'm configuring a new kernel for a machine, I don't want to learn about the suboptions for each device -- I've got dozens of other things to configure right. My favourite solution to this problem wuld be to ask the question once only and have it apply to all devices:

config MMIO
bool "Prefer Memory-mapped I/O accesses over Port I/O" help
Many devices are accessible via both memory mapped I/O and port I/O. Say Y here to access them via the slightly faster memory mapped I/O method. If you experience problems, you may wish to say N here.

If that's not acceptable, can I suggest that we at least ask a standard question?

config WWWW_MMIO
bool "Use Memory mapped I/O in preference to Port I/O" depends on WWWW
help
This device's registers can be accessed by either memory mapped I/O or port I/O. Memory mapped I/O is faster, so you are advised to say Y here.

(yes, we could wordsmith these questions into the ground; the key point of this mail is whether we ask one question at the start of configuration or whether we ask one question per device.)

Signature · 3 lines
"It's not Hollywood.  War is real, war is primarily not about defeat or
victory, it is about death.  I've seen thousands and thousands of dead bodies.
Do you think I want to have an academic debate on this subject?" -- Robert Fisk
#1 lore raw
Quoted 19 lines · Matthew Wilcox

config MMIO
bool "Prefer Memory-mapped I/O accesses over Port I/O" help
Many devices are accessible via both memory mapped I/O and port I/O. Say Y here to access them via the slightly faster memory mapped I/O method. If you experience problems, you may wish to say N here.

If that's not acceptable, can I suggest that we at least ask a standard question?

config WWWW_MMIO
bool "Use Memory mapped I/O in preference to Port I/O" depends on WWWW
help
This device's registers can be accessed by either memory mapped I/O or port I/O. Memory mapped I/O is faster, so you are advised to say Y here.

Quoted 3 lines

(yes, we could wordsmith these questions into the ground; the key point of this mail is whether we ask one question at the start of configuration or whether we ask one question per device.)

I like this idea, esp. as a global option. It would help e.g. visws which can't reliably do MMIO. Most platforms could default MMIO to y also, to make things easier.

Jesse

#2 lore raw
In reply to Matthew Wilcox
Quoted 2 lines · Matthew Wilcox

other things to configure right. My favourite solution to this problem wuld be to ask the question once only and have it apply to all devices:

What if need different settings for different drivers? I'd go for a standard question applied to all drivers that have the option.

Signature · 2 lines
Måns Rullgård
[email protected]