2.6.x net driver updates

Linus, please do a

bk pull bk://kernel.bkbits.net/jgarzik/net-drivers-2.5

The patch may be found at

ftp://ftp.kernel.org/pub/linux/kernel/people/jgarzik/patchkits/2.6/2.6.0-test5-bk2-netdrvr1.patch.bz2

This will update the following files:

 Documentation/networking/ifenslave.c |    1 
 drivers/net/Space.c                  |    5 
 drivers/net/bonding/bond_3ad.c       |   12 
 drivers/net/bonding/bond_3ad.h       |    2 
 drivers/net/bonding/bond_alb.c       |   17 
 drivers/net/bonding/bond_main.c      |  450 ++++---
 drivers/net/bonding/bonding.h        |    2 
 drivers/net/e1000/e1000.h            |    9 
 drivers/net/e1000/e1000_ethtool.c    |   84 +
 drivers/net/e1000/e1000_hw.c         | 2034 +++++++++++++++++++++--------------
 drivers/net/e1000/e1000_hw.h         |  405 ++++--
 drivers/net/e1000/e1000_main.c       |  204 ++-
 drivers/net/e1000/e1000_osdep.h      |    3 
 drivers/net/e1000/e1000_param.c      |   27 
 drivers/net/slip.c                   |    3 
 drivers/net/tokenring/olympic.c      |   37 
 drivers/net/wan/cosa.c               |   50 
 drivers/net/wan/cosa.h               |   12 
 drivers/net/wan/dlci.c               |  183 +--
 drivers/net/wan/sdla.c               |   92 -
 include/linux/if_frad.h              |    3 
 21 files changed, 2201 insertions(+), 1434 deletions(-)

through these ChangeSets:

<[email protected]> (03/09/11 1.1312)
[PATCH] (1/4) sdla - move out of Space.c

Apply on top of 2.6.0-test5-bk1 + Stephen sdla patches. Compiles fine.

free_netdev() patrol.

    drivers/net/wan/sdla.c |    2 +-
    1 files changed, 1 insertion(+), 1 deletion(-)

<[email protected]> (03/09/11 1.1311)
[PATCH] (5/4) dlci netdevice event handling

One more patch, found this in testing
-- need to delete device from list when unregistered
because of callback.

<[email protected]> (03/09/11 1.1310)
[PATCH] (4/4) dlci netdevice event handling

Since dlci device is a pseudo device built on top of sdla, change it to handle unregister events and delete itself.

<[email protected]> (03/09/11 1.1309)
[PATCH] (3/4) dlci locking and registration changes

Change the locking for the dlci device list and registration.
- use RTNL instead of a private lock (needed for net notifier in next patch).
- reorder the checks in the dlci_add to avoid complicated unwinds
- use dev->destructor to free
- hold RTNL around deassoc to protect callback from races

<[email protected]> (03/09/11 1.1308)
[PATCH] (2/4) get rid of register_frad

The sdla and dlci drivers have a callback interface which only stores a name in a table, but doesn't do anything useful. Looks like an interface which has lost it's usefulness and can be safely removed.

Tested on 2.6.0-test5 by exercising the higher layer (dlci) without real hardware.

<[email protected]> (03/09/11 1.1307)
[PATCH] (1/4) sdla - move out of Space.c

Patch against 2.60-test5 to move sdla driver out of Space.c for initialization in non-module case. Since this driver doesn't come up until the device has been configured with an ioctl (set_config); there is no way it can have startup order problems.

<[email protected]> (03/09/11 1.1306)
[PATCH] fix build of cosa

The cosa driver definition of ioctl's either conflicts or was not picked up in the last round of _IOR redefinition (on 2.6.0-test5).

The following makes it build, have no idea if it still works on real hardware.

<[email protected]> (03/09/11 1.1305)
[PATCH] slip.c: current state cleanup

<[email protected]> (03/09/11 1.1304)
[PATCH] tr/olympic probe: remove #warning, improve error handling

This patch to 2.6.0-test5 removes the #warning in tokenring/olympic.c and improves error handling in the probe function.

<[email protected]> (03/09/11 1.1303)
[e1000] misc whitespace cleanup, changelog

* misc whitespace cleanup, changelog

<[email protected]> (03/09/11 1.1302)
[e1000] Add PHY master/slave #define override

* Add PHY master/slave #define override to address link issues with 82541/7 (rev2) against some low-end switches. Forcing master will improve the time-to-link against these switches.

<[email protected]> (03/09/11 1.1301)
[e1000] move static to table from .h to .c

* Move static table from hw.h to hw.c to avoid creating a copy of table everytime hw.h is included.in .c.

<[email protected]> (03/09/11 1.1300)
[e1000] cleanup error return codes

* clean up error return code propagation and eliminate redundant DEBUGOUT statements.

<[email protected]> (03/09/11 1.1299)
[e1000] make function our of setting media type

* Consolidate code and make function out of setting media type.

<[email protected]> (03/09/11 1.1298)
[e1000] add ethtool flow control support

* Add ethtool flow control support

<[email protected]> (03/09/11 1.1297)
[e1000] read correct bit from EEPROM for getting WoL settings

* Bug fix: read the correct bit from the EEPROM that controls the initial setting for WoL after a reset.

<[email protected]> (03/09/11 1.1296)
[e1000] Turn off ASF support on Fiber nics

* Turn off ASF support on fiber nics. Wasn't tested and isn't known to work, so disable before someone hurts themselves.

<[email protected]> (03/09/11 1.1295)
[e1000] 82544 PCI-X hang fix + TSO updates

* Bug fix: 82544 hang with PCI-X: if outgoing Tx buffers terminate within evenly-aligned dwords, and the device is sharing the bus segment with another PCI-X device, 82544 can hang the bus on a split-completion transaction. Fix is to split buffer into two buffers with the first one not terminating within evenly-aligned dword address, and the second one being 4-bytes, which goes as a non-split-conpletion PCI-X transaction.
* 8254x controllers that support TSO do an internal calculation to make sure there is enough FIFO space to handle the overhead of each TSO segment before DMA'ing TSO data from host memory. The internal calculation is dependent on the mss of the TSO (defines the number of segments), but the reserved space is a constant, so we need to adjust the maximum size of each buffer queued to the hardware to hold the equation and not overrun the FIFO. This is per TSO because the mss can change from one send to the next.

<[email protected]> (03/09/11 1.1294)
[e1000] new 82541/5/6/7 hardware support

* Added 82545 (rev3), 82546 (rev3), and 82541/7 (rev2) support
- new device IDs
- internal SERDES support for 82545/6 (rev3)
- don't apply MMRBC workaround for 82545/6 (rev3)
- don't use IO mapping for reset for 82545/6 (rev3)

<[email protected]> (03/09/11 1.1293)
[bonding 2.6] misc fixes: missing include, typos, comments

<[email protected]> (03/09/11 1.1292)
[bonding 2.6] make each bond device use its own /proc entry

<[email protected]> (03/09/11 1.1291)
[bonding 2.6] fix error handling in init code

<[email protected]> (03/09/11 1.1290)
[bonding 2.6] embed stats struct inside bonding private struct

<[email protected]> (03/09/11 1.1289)
[bonding 2.6] fix OOPS in bonding driver, when removing primary

<[email protected]> (03/09/11 1.1288)
[bonding 2.6] fix change active command

<[email protected]> (03/09/11 1.1287)
[bonding 2.6] fix kernel panic when optional feature used

<[email protected]> (03/09/11 1.1286)
[bonding 2.6] fix ARP monitoring bug

<[email protected]> (03/09/11 1.1285)
[bonding 2.6] fix load balance problem with high UDP Tx stress

<[email protected]> (03/09/11 1.1284)
[bonding 2.6] fix 802.3ad long fail over with high UDP Tx stress