Skip to contentSkip to conversation

Problems with modules after installing Kernel 2.5.75

DISCUSSION Dennis Schridde 3 participants 3 messages Sep 14, 2003 – Sep 15, 2003

lore
Share & tools
lore
#0 lore raw

Hi List!
I have some Problems with module-symbols...

I hav compiled linux-2.5.75 without Problems
Then I copied arch/i386/boot/bzImage to /boot/vmlinuz-2.5.75 and System.map to /boot/System.map-2.5.75

When I now restart my System with this Kernel, I get following "error"-message in /var/log/boot.msg:
####################################
Inspecting /boot/System.map-2.5.75
Loaded 26091 symbols from /boot/System.map-2.5.75.
Symbols match kernel version 2.5.75.
No module symbols loaded - kernel modules not enabled.

[... ]

modprobe: FATAL: Module char_major_4 not found.
####################################
The modprobe error appears many times...

I edited the modules.conf in the way it is described on
http://www.dhaller.de/linux/multikernel.html
(It's german, but hope you understand it anyway)

I think I put the files at the wrong places...
Can you help me?

Thanks,
Dennis Schridde

I am using SuSE 8.2
on AMD Athlon 2000+
ASUS A7N8X (nVidia nForce2)
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

#1 lore raw
Quoted 4 lines · Dennis Schridde

Hi List!
I have some Problems with module-symbols...

I hav compiled linux-2.5.75 without Problems

Why ? We're into 2.6.0-test now, 2.5.75 is comparatively ancient. By
all means keep with this version until you have it sonfigured to your satisfaction, but there have been quite a lot of changes since 2.5.75.

Quoted 11 lines

Then I copied arch/i386/boot/bzImage to /boot/vmlinuz-2.5.75 and System.map to /boot/System.map-2.5.75

When I now restart my System with this Kernel, I get following "error"-message in /var/log/boot.msg:
####################################
Inspecting /boot/System.map-2.5.75
Loaded 26091 symbols from /boot/System.map-2.5.75.
Symbols match kernel version 2.5.75.
No module symbols loaded - kernel modules not enabled.

Quoted 2 lines

[... ]

Sounds as if you compiled everything into the kernel, instead of
building some things as modules. If you use `make menuconfig', you need to set things to 'm' instead of 'y' (been there, inadvertently built everything in to my first 2.5 kernel). - I see you've got a .config that works, so that's not a bad start for 2.5/2.6.

Quoted 4 lines

modprobe: FATAL: Module char_major_4 not found.
####################################
The modprobe error appears many times...

I assume this is because you've built it without modules, but did you
realise late-2.5 and 2.6 kernels will need Rusty's module init tools ? (look in Documentation/ for the file setting out what you need, the module tools are available on kernel.org mirrors in the people/rusty directory.)

Quoted 4 lines

I edited the modules.conf in the way it is described on
http://www.dhaller.de/linux/multikernel.html
(It's german, but hope you understand it anyway)

I've never before seen anything like this (uname -r in the name of
the modules.conf file), I was going to say that I couldn't see why anybody would do that, but I guess it can be useful in going to 2.5/2.6 (e.g. CDR/W drive using ide-scsi in 2.4 and ide-cd in 2.6). But I don't think this is the problem, it looks as if you haven't built the modules so you can't load them.

Quoted 6 lines

I think I put the files at the wrong places... Can you help me?

Thanks,
Dennis Schridde

Ken

Signature · 9 lines
<censored>



-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
#2 lore raw
In reply to Dennis Schridde
Quoted 7 lines · Dennis Schridde

Hi List!
I have some Problems with module-symbols...

I hav compiled linux-2.5.75 without Problems
Then I copied arch/i386/boot/bzImage to /boot/vmlinuz-2.5.75 and System.map to /boot/System.map-2.5.75

Quoted 7 lines

When I now restart my System with this Kernel, I get following "error"-message in /var/log/boot.msg:
####################################
Inspecting /boot/System.map-2.5.75
Loaded 26091 symbols from /boot/System.map-2.5.75. Symbols match kernel version 2.5.75.
No module symbols loaded - kernel modules not enabled.

Theres your answer, you disabled modules during your configuration.

Quoted 5 lines

[... ]

modprobe: FATAL: Module char_major_4 not found.
####################################
The modprobe error appears many times...

Of course it will because you configured without module support.

Quoted 4 lines

I edited the modules.conf in the way it is described on
http://www.dhaller.de/linux/multikernel.html
(It's german, but hope you understand it anyway)

You can edit what you want but it will not help, go and reconfigure the kernel and start over.

Why would you want to use such an old "development kernel".? .6.0{test-x} is out, you may want to try that.
Be sure to read the Changes file in the Documentation directory, and of course update your system accordinly otherwise it still wont work.

Quoted 2 lines

I think I put the files at the wrong places...

You may or may not get more help at;
http://people.zeelandnet.nl/pa3gcu/kernel.htm

Quoted 4 lines

Can you help me?

Thanks,
Dennis Schridde

Signature · 15 lines
If the Linux community is a bunch of theives because they
try to imitate windows programs, then the Windows community
is built on organized crime.

Regards Richard
[email protected]
http://people.zeelandnet.nl/pa3gcu/



-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs