Skip to contentSkip to conversation

Kernel 2.6.0-test5 Refuses to Boot (ceases after "mice: PS/2 mouse device common for all mice")

DISCUSSION M M 3 participants 4 messages Sep 16, 2003

lore
Share & tools
lore

M M

author
#0 lore raw

I've downloaded, configured (make oldconfig using .config from 2.4.21), and compiled kernel 2.6.0-test5, but it just refuses to boot completely.

It prints:
drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice

and just stops booting.

Which configuration option(s) did I miss?

-MrM

P.S. Thanks in advance!

__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com

#1 lore raw
Quoted 5 lines · M M

I've downloaded, configured (make oldconfig using .config from 2.4.21), and compiled kernel 2.6.0-test5, but it just refuses to boot completely.

Quoted 8 lines

It prints:
drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice

and just stops booting.

Which configuration option(s) did I miss?

Please add `initcall_debug' to your kernel boot comand line. You will see a lot of lines of the form "calling initcall 0xNNNNNNNN". Write down the final address, reboot and look it up in System.map.

Also try disabling ACPI.

#2 lore raw
Quoted 13 lines · Andrew Morton
Quoted 12 lines · M M

I've downloaded, configured (make oldconfig using .config from 2.4.21), and compiled kernel 2.6.0-test5, but it just refuses to boot completely.

It prints:
drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice

and just stops booting.

Quoted 7 lines
Quoted 1 line

Which configuration option(s) did I miss?

Please add `initcall_debug' to your kernel boot comand line. You will see a lot of lines of the form "calling initcall 0xNNNNNNNN". Write down the final address, reboot and look it up in System.map.

Also try disabling ACPI.

Please, take a look at:
http://bugzilla.kernel.org/show_bug.cgi?id=1123

author
#3 lore raw
In reply to Andrew Morton

Disabling APCI works. Thanks.

-MrM

Quoted 7 lines · --- Andrew Morton
Quoted 5 lines · M M

I've downloaded, configured (make oldconfig using
.config from 2.4.21), and compiled kernel
2.6.0-test5,
but it just refuses to boot completely.

Also try disabling ACPI.

__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com