remove CONFIG_SERIAL_21285_OLD (fwd)
PATCH 1/1 remove CONFIG_SERIAL_21285_OLD (fwd)
The patch below (already approved by Russell King) still applies (with a few lines offset) against current 2.6 kernels.
Please apply
Adrian
----- Forwarded message from Adrian Bunk <[email protected]> -----
Date: Mon, 14 Jul 2003 00:41:11 +0200
From: Adrian Bunk <[email protected]>
To: Russell King <[email protected]>, [email protected]
Cc: [email protected], [email protected]
Subject: [2.5 patch] remove CONFIG_SERIAL_21285_OLD
CONFIG_SERIAL_21285_OLD depends on the non-existent option CONFIG_OBSOLETE, IOW it's not selectable, and the help text says "This is obsolete and will be removed during later 2.5 development.".
Is the patch below to remove this option OK?
cu
Adrian
drivers/serial/Kconfig renamed from drivers/serial/Kconfig.old +0 -7
@@ -249,13 +249,6 @@ PCI bridge you can enable its onboard serial port by enabling this option. -config SERIAL_21285_OLD - bool "Use /dev/ttyS0 device (OBSOLETE)" - depends on SERIAL_21285=y && OBSOLETE - help - Use the old /dev/ttyS name, major 4 minor 64. This is obsolete - and will be removed during later 2.5 development. - config SERIAL_21285_CONSOLE bool "Console on DC21285 serial port" depends on SERIAL_21285=y
drivers/serial/21285.c renamed from drivers/serial/21285.c.old +0 -12
@@ -481,18 +481,6 @@ }extern struct uart_driver serial21285_reg; -#ifdef CONFIG_SERIAL_21285_OLD -static struct console serial21285_old_cons = -{ - .name =SERIAL_21285_OLD_NAME , - .write = serial21285_console_write, - .device = uart_console_device, - .setup = serial21285_console_setup, - .flags =CON_PRINTBUFFER , - .index =-1 , - .data = &serial21285_reg, -}; -#endif static struct console serial21285_console = {
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
----- End forwarded message -----