Skip to contentSkip to conversation

Kernel panic:Unable to mount root fs (2.6.0-test5)

DISCUSSION Bradley Chapman 3 participants 8 messages Sep 27, 2003

lore
Share & tools
lore
#0 lore raw

Mr. Spaggari,

Quoted 20 lines

(as you can see, i'm a newbie of english speeking, and linux-kernel posting, so, excuse me if this is a duplicate contribution, I have search on the web and on the archive and fine nothing about this error.)

Error message :
VFS : Cannot open root device "302" or unknown-block(3,2) Please append a corect "root=" boot option

Kernel panic: VFS: Unable to mount root fs on unknown-block(3,2)

Kernel version : 2.6.0-test5

System : Toshiba Satellite laptop

More information : Linux is installe on /deh/hda2. There 2 other kernel on this computer. A 2.2.20 and a 2.4.22, both of them working fine. Ia have try many differend option for compile the kernel, but never working any more. My /dev/hda2 is on ext3.

Quoted 4 lines

I will try soon on my other systems.

I will be hapy if I can help in any kind, so, at this time, i'm going back to 2.4.22. (Need I to poste my .config here ?)

Please do so. Specifically, post the part of your .config which shows how your filesystems are configured. It looks to me like you may have accidentally compiled ext3 as a module; if your / filesystem is ext3, it must be compiled into the kernel in order for the kernel to mount your root filesystem and run /sbin/init.

Quoted 4 lines

Regards,

Jean-Marc Spaggiari (QC.CA)

Brad

=====
Brad Chapman

Permanent e-mail: [email protected]

__________________________________
Do you Yahoo!?
The New Yahoo! Shopping - with improved product search
http://shopping.yahoo.com

#1 lore raw
Quoted 4 lines
Quoted 2 lines

I will be hapy if I can help in any kind, so, at this time, i'm going back to 2.4.22. (Need I to poste my .config here ?)

Quoted 8 lines

Please do so. Specifically, post the part of your .config which shows how your filesystems are configured. It looks to me like you may have accidentally compiled ext3 as a module; if your / filesystem is ext3, it must be compiled into the kernel in order for the kernel to mount your root filesystem and run /sbin/init.

Brad Chapman

Permanent e-mail: [email protected]

I htink I have activated all that's possible in my Kernel :

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
CONFIG_MINIX_FS=m
# CONFIG_ROMFS_FS is not set
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y

If you have any suggestion, I can try immediatly an send you feedback fastly.

Thanks,

JMS.

#2 lore raw

Mr. Spaggari,

Quoted 44 lines · --- Jean-Marc Spaggiari
Quoted 6 lines
Quoted 2 lines

I will be hapy if I can help in any kind, so, at this time, i'm going back to 2.4.22. (Need I to poste my .config here ?)

Please do so. Specifically, post the part of your .config which shows how your filesystems are configured. It looks to me like you may have accidentally

compiled

Quoted 1 line

ext3 as a module; if your / filesystem is ext3, it must be compiled into the

kernel

Quoted 5 lines

in order for the kernel to mount your root filesystem and run /sbin/init.

Brad Chapman

Permanent e-mail: [email protected]

I htink I have activated all that's possible in my Kernel :

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
CONFIG_MINIX_FS=m
# CONFIG_ROMFS_FS is not set
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y

Quoted 2 lines

If you have any suggestion, I can try immediatly an send you feedback fastly.

Can you send more of the dmesg that comes from 2.6 when you try to boot it? (i.e. send more lines of it than the last few)

Quoted 5 lines

Thanks,

JMS.

Brad

=====
Brad Chapman

Permanent e-mail: [email protected]

__________________________________
Do you Yahoo!?
The New Yahoo! Shopping - with improved product search
http://shopping.yahoo.com

#3 lore raw
Quoted 6 lines · Bradley Chapman

Can you send more of the dmesg that comes from 2.6 when you try to boot it? (i.e. send more lines of it than the last few)

Please, can you explain me how can I do that ? BEcause when I'm starting with 2.6 kernel, it's hanging will starting, and when I'm starting with 2.4.22 kernel, only informations about 2.4.22 is show by dmesg ... (If the 2.6 can't mounty the /, maybe it's why it can't write information for dmesg on ?)

Here is what I can see on the screen :

floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
8139too Fast Ethernet driver 0.9.26
eth0: Realtek RTL8139 at 0xe3809f00, 00:08:0d:89:3c:38, IRQ 5
mice: PS/2 mouse device common for all mice
Synaptics Touchpad, model: 1
Firware: 5.9
Sensor: 15
ne absolute packet format
Touchpad has extended capability bits
-> multifinger detection
-> palm detection
input: Synaptics TouchPad on isa0060/serio1
serio: i8042 AUX port at 0x60,0x64 irq 12
input: AT Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60, 0x64 irq 1
NET: Registred protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
NET: Registerd protocol family 1
VFS: Cannont open root device "302" or unknown-block(3,2) Please append a correct "root=" boot option

Kernel panics: VFS: Unable to mount root fr onunknown-block(3,2)

That's all. I will try to modify the number of line of the screen in the bis for seeing more information, but I can't promise anythinks ...

JMS.

#4 lore raw

Mr. Spaggari,

Quoted 9 lines · --- Jean-Marc Spaggiari
Quoted 6 lines · Bradley Chapman

Can you send more of the dmesg that comes from 2.6 when you try to boot it? (i.e. send more lines of it than the last few)

Quoted 5 lines

Please, can you explain me how can I do that ? BEcause when I'm starting with 2.6 kernel, it's hanging will starting, and when I'm starting with 2.4.22 kernel, only informations about 2.4.22 is show by dmesg ... (If the 2.6 can't mounty the /, maybe it's why it can't write information for dmesg on ?)

You're correct. What you've posted on the screen is exactly what I wanted, thanks :)

Quoted 26 lines

Here is what I can see on the screen :

floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
8139too Fast Ethernet driver 0.9.26
eth0: Realtek RTL8139 at 0xe3809f00, 00:08:0d:89:3c:38, IRQ 5
mice: PS/2 mouse device common for all mice
Synaptics Touchpad, model: 1
Firware: 5.9
Sensor: 15
ne absolute packet format
Touchpad has extended capability bits
-> multifinger detection
-> palm detection
input: Synaptics TouchPad on isa0060/serio1
serio: i8042 AUX port at 0x60,0x64 irq 12
input: AT Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60, 0x64 irq 1
NET: Registred protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
NET: Registerd protocol family 1
VFS: Cannont open root device "302" or unknown-block(3,2) Please append a correct "root=" boot option

Quoted 1 line
Kernel panics: VFS: Unable to mount root fr onunknown-block(3,2)

I don't understand this "unknown-block" thing; I've never seen it before on a 2.4 kernel. Grepping the source of a 2.6.0-test5-mm4 kernel, which is what I use, shows that the "unknown-block" message comes from this function:

const char *__bdevname(dev_t dev, char *buffer)

{
	struct gendisk *disk;
	int part;

	disk = get_gendisk(dev, &part);
	if (disk) {
		buffer = disk_name(disk, part, buffer);
		put_disk(disk);
	} else {
		snprintf(buffer, BDEVNAME_SIZE, "unknown-block(%u,%u)",
				MAJOR(dev), MINOR(dev));
	}

	return buffer;
}

Which is completely out of my league.

At this point I'd try 2.6.0-test5-mm4 (available at [www,ftp].kernel.org/pub/linux/ kernel/people/akpm/patches/2.6/2.6.0-test5/2.6.0-test5-mm4/2.6.0-test5-mm4.[bz2,gz]) or appeal to one of the Block Device Overlords, like Jens Axboe, for help.

Quoted 6 lines

That's all. I will try to modify the number of line of the screen in the bis for seeing more information, but I can't promise anythinks ...

JMS.

Brad

=====
Brad Chapman

Permanent e-mail: [email protected]

__________________________________
Do you Yahoo!?
The New Yahoo! Shopping - with improved product search
http://shopping.yahoo.com

#5 lore raw
Quoted 8 lines · Bradley Chapman

Which is completely out of my league.

At this point I'd try 2.6.0-test5-mm4 (available at [www,ftp].kernel.org/pub/linux/ kernel/people/akpm/patches/2.6/2.6.0-test5/2.6.0-test5-mm4/2.6.0-test5-mm4.[bz2,gz]) or appeal to one of the Block Device Overlords, like Jens Axboe, for help.

Brad

Thanks for your help. I have download the mm4 patch, but don't know how to install it. And can you explain me how can I send a request to Jens Axboe or other Block Device Overlords ?

JMS.

#6 lore raw
In reply to Jean-Marc Spaggiari
Quoted 25 lines · Jean-Marc Spaggiari

Here is what I can see on the screen :

floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
8139too Fast Ethernet driver 0.9.26
eth0: Realtek RTL8139 at 0xe3809f00, 00:08:0d:89:3c:38, IRQ 5
mice: PS/2 mouse device common for all mice
Synaptics Touchpad, model: 1
Firware: 5.9
Sensor: 15
ne absolute packet format
Touchpad has extended capability bits
-> multifinger detection
-> palm detection
input: Synaptics TouchPad on isa0060/serio1
serio: i8042 AUX port at 0x60,0x64 irq 12
input: AT Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60, 0x64 irq 1
NET: Registred protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
NET: Registerd protocol family 1
VFS: Cannont open root device "302" or unknown-block(3,2) Please append a correct "root=" boot option

Quoted 1 line
Kernel panics: VFS: Unable to mount root fr onunknown-block(3,2)

Which has one interesting thing and doesn't have another.
1) kernel has no idea WTF major 3/minor 2 means.
2) kernel hadn't even tried to look around for IDE disks

The most likely cause: IDE support is not turned on. Check your .config - the interesting parts are CONFIG_BLK_DEV_IDE and CONFIG_BLK_DEV_IDEDISK.

#7 lore raw

Mr. Viro,

Quoted 29 lines · --- [email protected] wrote:
Quoted 25 lines · Jean-Marc Spaggiari

Here is what I can see on the screen :

floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
8139too Fast Ethernet driver 0.9.26
eth0: Realtek RTL8139 at 0xe3809f00, 00:08:0d:89:3c:38, IRQ 5
mice: PS/2 mouse device common for all mice
Synaptics Touchpad, model: 1
Firware: 5.9
Sensor: 15
ne absolute packet format
Touchpad has extended capability bits
-> multifinger detection
-> palm detection
input: Synaptics TouchPad on isa0060/serio1
serio: i8042 AUX port at 0x60,0x64 irq 12
input: AT Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60, 0x64 irq 1
NET: Registred protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
NET: Registerd protocol family 1
VFS: Cannont open root device "302" or unknown-block(3,2) Please append a correct "root=" boot option

Quoted 1 line
Kernel panics: VFS: Unable to mount root fr onunknown-block(3,2)
Quoted 6 lines

Which has one interesting thing and doesn't have another.
1) kernel has no idea WTF major 3/minor 2 means.
2) kernel hadn't even tried to look around for IDE disks

The most likely cause: IDE support is not turned on. Check your .config - the interesting parts are CONFIG_BLK_DEV_IDE and CONFIG_BLK_DEV_IDEDISK.

I never thought of that. But if he had used make oldconfig, make xconfig or copied a 2.4 .config into the source tree, how would CONFIG_BLK_DEV_IDE and CONFIG_BLK_DEV_IDEDISK end up N?

Brad

=====
Brad Chapman

Permanent e-mail: [email protected]

__________________________________
Do you Yahoo!?
The New Yahoo! Shopping - with improved product search
http://shopping.yahoo.com