Skip to contentSkip to conversation

New driver for the Silicon Motion Lynx series chips

DISCUSSION Thomas S. Iversen 1 participant 1 message Oct 1, 2003 Framebuffer layer

lore
Share & tools
lore
#0 lore raw

Hi There

I have just finalized a new driver for the Silicon Motion Lynx series chips. I have used it the last month or so. It works on my laptop, an asus S8100 with the Lynx3DM chipset and I have just gained access to another containing the LynxEM chip (on which I will test the driver shortly). As the most critical part, the TFT timings, are taken from XFree86 and/or the BIOS in my laptop, I do not think this driver will break anything.

The driver only supports Digital Flat Panels at the moment (due to time constraints in the course) but I will add real CRT monitor support as soon as possible(tm)

The driver is totally accelerated with all three types of blits and a hardware cursor.

Code can be found at http://www.dina.kvl.dk/~thomassi/lynxfb
It plugs into /usr/src/linux/drivers/video/lynxfb if unpacked in /usr/src/linux/drivers/video

There are 3 diff files in the code. One for the Makefile in drivers/video, one for Kconfig and one for pci_ids.h

Regards Thomas S. Iversen

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf