Skip to contentSkip to conversation

SGI/HAL2 architecture detection

DISCUSSION Ryan Underwood 2 participants 3 messages Oct 3, 2003 – Oct 6, 2003

lore
Share & tools
lore
#0 lore raw

In latest kernels, the file /usr/src/linux/include/asm/sgi/sgihpc.h has become /usr/src/linux/include/asm/sgi/hpc3.h. Both files need to be checked in configure.in now to determine SGI architecture.

Signature · 7 lines
Ryan Underwood, <nemesis at icequake.net>, icq=10317253


-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
#1 lore raw

Ok, I fixed this, and then discover that a Makefile is not generated in /hal2 directory, so the build dies at that point. What should I use for a Makefile template for this directory? Has anyone built this successfully?

Ryan

Quoted 18 lines · Ryan Underwood

In latest kernels, the file /usr/src/linux/include/asm/sgi/sgihpc.h has become /usr/src/linux/include/asm/sgi/hpc3.h. Both files need to be checked in configure.in now to determine SGI architecture.

Signature · 11 lines
Ryan Underwood, <nemesis at icequake.net>, icq=10317253


-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
Signature · 7 lines
Ryan Underwood, <nemesis at icequake.net>, icq=10317253


-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
#2 lore raw

At Fri, 3 Oct 2003 17:10:42 -0500,

Quoted 5 lines · Ryan Underwood

Ok, I fixed this, and then discover that a Makefile is not generated in /hal2 directory, so the build dies at that point. What should I use for a Makefile template for this directory? Has anyone built this successfully?

are you using 2.6 kernel?

if yes, it's good chance to move hal2 driver to alsa-kernel tree, i.e. eventually to 2.6 linux tree, so that more people can see it. (so far, it's been in alsa-driver tree because no one tested it :)

please move hal2 directory under alsa-kernel, edit Makefile and Kconfig there. and on alsa-driver tree, you can do just like parisc directory.

Takashi

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf