8139too poll controller

@@ -618,6 +618,10 @@
 static void rtl8139_hw_start (struct net_device *dev);
 static struct ethtool_ops rtl8139_ethtool_ops;
 
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void rtl8139_rx_poll (struct net_device *dev);
+#endif
+
 #ifdef USE_IO_OPS
 
 #define RTL_R8(reg)		inb (((unsigned long)ioaddr) + (reg))

@@ -970,6 +974,10 @@
 	dev->tx_timeout = rtl8139_tx_timeout;
 	dev->watchdog_timeo = TX_TIMEOUT;
 
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	dev->poll_controller = rtl8139_rx_poll;
+#endif
+
 	/* note: the hardware is not capable of sg/csum/highdma, however
 	 * through the use of skb_copy_and_csum_dev we enable these
 	 * features

@@ -2388,6 +2396,15 @@
 	return &tp->stats;
 }
 
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void rtl8139_rx_poll (struct net_device *dev)
+{
+	disable_irq(dev->irq);
+	rtl8139_interrupt(dev->irq, (void *)dev, 0);
+	enable_irq(dev->irq);
+}
+#endif
+
 /* Set or clear the multicast filter for this adaptor.
    This routine is not state sensitive and need not be SMP locked. */