Skip to contentSkip to conversation

hppa glibc 2.3.2-9 available for the brave testers!

parisc-linux Carlos O'Donell 4 participants 17 messages Oct 17, 2003 – Oct 21, 2003

lore
Share & tools
lore

Carlos O'Donell

author
#0 lore raw

parisc-linux,
debian-hppa,

--- CALLING ALL TESTERS! ---

glibc 2.3.2 is complete for HPPA. We've gotten rid of the following long standing test-suite errors (bug-iconv3, and test-fenv).

The regressions in 2.3.2 were caused by incorrect handling of the PIC register by the kernel, but fixed in glibc. Most cases for our stack were handled incorrectly (stack grows up cases), but are fixed in this release.

ftp://ftp.parisc-linux.org/unofficial-debs/glibc_2.3.2-9_2003-10-16/

Download all the debs and install with:

dpkg -i libc6_*.deb
(Followed by dpkg -i of the rest in any order, libc6 must install first)

Please do this only if you consider yourself a well seasoned linux-type person. If that dpkg install fails for any reason you might be in trouble. I'm running these debs on all my boxes, and I've tested in a chroot, rebuilt our toolchain, and ran lmbench, gnome-session, nautilus, and abi-word.

http://www.baldric.uwo.ca/~carlos/a500-gnome-abiword.png

Thanks go out to everyone for all the moral support and fun!

--- TEST IT AND REPORT BACK ... PLEASE! :) ---

== DISCLAIMER ===
I do not guarantee that these debs won't cause your computer to explode like a pineapple grenade, showering shrapnel and fiery death on all your loved ones.
== DISCLAIMER ===

c.

#1 lore raw

Hi Carlos,

I can safely broken my raid1 Debian/unstable install and drive some test on a disk :) and advise you.

Joel

Quoted 45 lines · Carlos O'Donell

parisc-linux,
debian-hppa,

--- CALLING ALL TESTERS! ---

glibc 2.3.2 is complete for HPPA. We've gotten rid of the following long standing test-suite errors (bug-iconv3, and test-fenv).

The regressions in 2.3.2 were caused by incorrect handling of the PIC register by the kernel, but fixed in glibc. Most cases for our stack were handled incorrectly (stack grows up cases), but are fixed in this release.

ftp://ftp.parisc-linux.org/unofficial-debs/glibc_2.3.2-9_2003-10-16/

Download all the debs and install with:

dpkg -i libc6_*.deb
(Followed by dpkg -i of the rest in any order, libc6 must install first)

Please do this only if you consider yourself a well seasoned linux-type person. If that dpkg install fails for any reason you might be in trouble. I'm running these debs on all my boxes, and I've tested in a chroot, rebuilt our toolchain, and ran lmbench, gnome-session, nautilus, and abi-word.

http://www.baldric.uwo.ca/~carlos/a500-gnome-abiword.png

Thanks go out to everyone for all the moral support and fun!

--- TEST IT AND REPORT BACK ... PLEASE! :) ---

== DISCLAIMER ===
I do not guarantee that these debs won't cause your computer to explode like a pineapple grenade, showering shrapnel and fiery death on all your loved ones.
== DISCLAIMER ===

c.

_______________________________________________
parisc-linux mailing list
[email protected]
http://lists.parisc-linux.org/mailman/listinfo/parisc-linux

#2 lore raw
In reply to Carlos O'Donell

Hi Carlos,

I can safely broken my raid1 Debian/unstable install and drive some test on a disk :) and advise you.

Joel

Quoted 45 lines · Carlos O'Donell

parisc-linux,
debian-hppa,

--- CALLING ALL TESTERS! ---

glibc 2.3.2 is complete for HPPA. We've gotten rid of the following long standing test-suite errors (bug-iconv3, and test-fenv).

The regressions in 2.3.2 were caused by incorrect handling of the PIC register by the kernel, but fixed in glibc. Most cases for our stack were handled incorrectly (stack grows up cases), but are fixed in this release.

ftp://ftp.parisc-linux.org/unofficial-debs/glibc_2.3.2-9_2003-10-16/

Download all the debs and install with:

dpkg -i libc6_*.deb
(Followed by dpkg -i of the rest in any order, libc6 must install first)

Please do this only if you consider yourself a well seasoned linux-type person. If that dpkg install fails for any reason you might be in trouble. I'm running these debs on all my boxes, and I've tested in a chroot, rebuilt our toolchain, and ran lmbench, gnome-session, nautilus, and abi-word.

http://www.baldric.uwo.ca/~carlos/a500-gnome-abiword.png

Thanks go out to everyone for all the moral support and fun!

--- TEST IT AND REPORT BACK ... PLEASE! :) ---

== DISCLAIMER ===
I do not guarantee that these debs won't cause your computer to explode like a pineapple grenade, showering shrapnel and fiery death on all your loved ones.
== DISCLAIMER ===

c.

_______________________________________________
parisc-linux mailing list
[email protected]
http://lists.parisc-linux.org/mailman/listinfo/parisc-linux

#3 lore raw

Carlos,

Sucessfully install :)

Some rsync, ssh connection still work fine;

as well 'apt-get install somepkg'.

build our k-2.6.0-test8-pa1 with success also (boot fine ;) )

evolution (k-2.4.21-32 always) works fine (a bit slow on my c110)

Test case about mallopt() ok :)

So squid didn't hang any more at start up but still failled:
'Setting up squid (2.5.4-2) ...
Creating squid spool directory structure
FATAL: Could not determine fully qualified hostname. Please set 'visible_hostname'

Squid Cache (Version 2.5.STABLE4): Terminated abnormally.
CPU Usage: 0.140 seconds = 0.060 user + 0.080 sys
Maximum Resident Size: 0 KB
Page faults with physical i/o: 323
/var/lib/dpkg/info/squid.postinst: line 177: 1082 Aborted
/usr/sbin/squid -z
Starting proxy server: Creating squid spool directory structure
FATAL: Could not determine fully qualified hostname. Please set 'visible_hostname'

Squid Cache (Version 2.5.STABLE4): Terminated abnormally.
CPU Usage: 0.150 seconds = 0.040 user + 0.110 sys
Maximum Resident Size: 0 KB
Page faults with physical i/o: 323
/etc/init.d/squid: line 133: 1106 Aborted /usr/sbin/squid -z
FATAL: Could not determine fully qualified hostname. Please set 'visible_hostname'

Squid Cache (Version 2.5.STABLE4): Terminated abnormally.
CPU Usage: 0.180 seconds = 0.080 user + 0.100 sys
Maximum Resident Size: 0 KB
Page faults with physical i/o: 435
/etc/init.d/squid: line 133: 1108 Aborted start-stop-daemon --quiet --start --pidfile $PIDFILE --exec $DAEMON -- $SQUID_ARGS </dev/null squid.'

I will try to see?

Quoted 57 lines · Joel Soete

Hi Carlos,

I can safely broken my raid1 Debian/unstable install and drive some test on a disk :) and advise you.

Joel

Quoted 36 lines · Carlos O'Donell

parisc-linux,
debian-hppa,

--- CALLING ALL TESTERS! ---

glibc 2.3.2 is complete for HPPA. We've gotten rid of the following long standing test-suite errors (bug-iconv3, and test-fenv).

The regressions in 2.3.2 were caused by incorrect handling of the PIC register by the kernel, but fixed in glibc. Most cases for our stack were handled incorrectly (stack grows up cases), but are fixed in this release.

ftp://ftp.parisc-linux.org/unofficial-debs/glibc_2.3.2-9_2003-10-16/

Download all the debs and install with:

dpkg -i libc6_*.deb
(Followed by dpkg -i of the rest in any order, libc6 must install first) Please do this only if you consider yourself a well seasoned linux-type person. If that dpkg install fails for any reason you might be in trouble. I'm running these debs on all my boxes, and I've tested in a chroot, rebuilt our toolchain, and ran lmbench, gnome-session, nautilus, and abi-word.

http://www.baldric.uwo.ca/~carlos/a500-gnome-abiword.png

Thanks go out to everyone for all the moral support and fun! --- TEST IT AND REPORT BACK ... PLEASE! :) ---

== DISCLAIMER ===
I do not guarantee that these debs won't cause your computer to explode like a pineapple grenade, showering shrapnel and fiery death on all your loved ones.
== DISCLAIMER ===

Quoted 7 lines

c.

_______________________________________________
parisc-linux mailing list
[email protected]
http://lists.parisc-linux.org/mailman/listinfo/parisc-linux

_______________________________________________
parisc-linux mailing list
[email protected]
http://lists.parisc-linux.org/mailman/listinfo/parisc-linux

#4 lore raw
In reply to Joel Soete

Carlos,

Sucessfully install :)

Some rsync, ssh connection still work fine;

as well 'apt-get install somepkg'.

build our k-2.6.0-test8-pa1 with success also (boot fine ;) )

evolution (k-2.4.21-32 always) works fine (a bit slow on my c110)

Test case about mallopt() ok :)

So squid didn't hang any more at start up but still failled:
'Setting up squid (2.5.4-2) ...
Creating squid spool directory structure
FATAL: Could not determine fully qualified hostname. Please set 'visible_hostname'

Squid Cache (Version 2.5.STABLE4): Terminated abnormally.
CPU Usage: 0.140 seconds = 0.060 user + 0.080 sys
Maximum Resident Size: 0 KB
Page faults with physical i/o: 323
/var/lib/dpkg/info/squid.postinst: line 177: 1082 Aborted
/usr/sbin/squid -z
Starting proxy server: Creating squid spool directory structure
FATAL: Could not determine fully qualified hostname. Please set 'visible_hostname'

Squid Cache (Version 2.5.STABLE4): Terminated abnormally.
CPU Usage: 0.150 seconds = 0.040 user + 0.110 sys
Maximum Resident Size: 0 KB
Page faults with physical i/o: 323
/etc/init.d/squid: line 133: 1106 Aborted /usr/sbin/squid -z
FATAL: Could not determine fully qualified hostname. Please set 'visible_hostname'

Squid Cache (Version 2.5.STABLE4): Terminated abnormally.
CPU Usage: 0.180 seconds = 0.080 user + 0.100 sys
Maximum Resident Size: 0 KB
Page faults with physical i/o: 435
/etc/init.d/squid: line 133: 1108 Aborted start-stop-daemon --quiet --start --pidfile $PIDFILE --exec $DAEMON -- $SQUID_ARGS </dev/null squid.'

I will try to see?

Quoted 57 lines · Joel Soete

Hi Carlos,

I can safely broken my raid1 Debian/unstable install and drive some test on a disk :) and advise you.

Joel

Quoted 36 lines · Carlos O'Donell

parisc-linux,
debian-hppa,

--- CALLING ALL TESTERS! ---

glibc 2.3.2 is complete for HPPA. We've gotten rid of the following long standing test-suite errors (bug-iconv3, and test-fenv).

The regressions in 2.3.2 were caused by incorrect handling of the PIC register by the kernel, but fixed in glibc. Most cases for our stack were handled incorrectly (stack grows up cases), but are fixed in this release.

ftp://ftp.parisc-linux.org/unofficial-debs/glibc_2.3.2-9_2003-10-16/

Download all the debs and install with:

dpkg -i libc6_*.deb
(Followed by dpkg -i of the rest in any order, libc6 must install first) Please do this only if you consider yourself a well seasoned linux-type person. If that dpkg install fails for any reason you might be in trouble. I'm running these debs on all my boxes, and I've tested in a chroot, rebuilt our toolchain, and ran lmbench, gnome-session, nautilus, and abi-word.

http://www.baldric.uwo.ca/~carlos/a500-gnome-abiword.png

Thanks go out to everyone for all the moral support and fun! --- TEST IT AND REPORT BACK ... PLEASE! :) ---

== DISCLAIMER ===
I do not guarantee that these debs won't cause your computer to explode like a pineapple grenade, showering shrapnel and fiery death on all your loved ones.
== DISCLAIMER ===

Quoted 7 lines

c.

_______________________________________________
parisc-linux mailing list
[email protected]
http://lists.parisc-linux.org/mailman/listinfo/parisc-linux

_______________________________________________
parisc-linux mailing list
[email protected]
http://lists.parisc-linux.org/mailman/listinfo/parisc-linux

author
#5 lore raw
Quoted 5 lines · Joel Soete

So squid didn't hang any more at start up but still failled:
'Setting up squid (2.5.4-2) ...
Creating squid spool directory structure
FATAL: Could not determine fully qualified hostname. Please set 'visible_hostname'

recvfrom, six argument syscall, fails. I found this out people who use nscd found it crashing.

c.

author
#6 lore raw
In reply to Joel Soete
Quoted 5 lines · Joel Soete

So squid didn't hang any more at start up but still failled:
'Setting up squid (2.5.4-2) ...
Creating squid spool directory structure
FATAL: Could not determine fully qualified hostname. Please set 'visible_hostname'

recvfrom, six argument syscall, fails. I found this out people who use nscd found it crashing.

c.

#7 lore raw
In reply to Carlos O'Donell
Quoted 1 line · Carlos O'Donell

ftp://ftp.parisc-linux.org/unofficial-debs/glibc_2.3.2-9_2003-10-16/

I've downloaded the debs and copied them to my ftp server on gsyprf10 in case ftp.p-l.o is saturated (unlikely).

And kudos to Carlos!

I've installed the libc6 and libc6-dev debs on both c3k's and they both are working fine (well, mozilla-firebird is still broken, not new).

Thanks!
grant

#8 lore raw
In reply to Carlos O'Donell
Quoted 1 line · Carlos O'Donell

ftp://ftp.parisc-linux.org/unofficial-debs/glibc_2.3.2-9_2003-10-16/

I've downloaded the debs and copied them to my ftp server on gsyprf10 in case ftp.p-l.o is saturated (unlikely).

And kudos to Carlos!

I've installed the libc6 and libc6-dev debs on both c3k's and they both are working fine (well, mozilla-firebird is still broken, not new).

Thanks!
grant

#9 lore raw
Quoted 3 lines

I've installed the libc6 and libc6-dev debs on both c3k's and they both are working fine (well, mozilla-firebird is still broken, not new).

I don't know about firebird but standard mozilla needs some pa specific configuration stuff added before it will build/work. I made a first cut at this and started debugging the app a few weeks ago, but got caught up in other things.

Dave

Signature · 2 lines
J. David Anglin                                  [email protected]
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)
#10 lore raw
In reply to Grant Grundler
Quoted 3 lines

I've installed the libc6 and libc6-dev debs on both c3k's and they both are working fine (well, mozilla-firebird is still broken, not new).

I don't know about firebird but standard mozilla needs some pa specific configuration stuff added before it will build/work. I made a first cut at this and started debugging the app a few weeks ago, but got caught up in other things.

Dave

Signature · 2 lines
J. David Anglin                                  [email protected]
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)
author
#11 lore raw
Quoted 8 lines · John David Anglin
Quoted 3 lines

I've installed the libc6 and libc6-dev debs on both c3k's and they both are working fine (well, mozilla-firebird is still broken, not new).

I don't know about firebird but standard mozilla needs some pa specific configuration stuff added before it will build/work. I made a first cut at this and started debugging the app a few weeks ago, but got caught up in other things.

I'm surprised that more things aren't broken, the typo in sysdep-cancel made all six argument syscalls unsuable :)

Thanks for the testing guys!

c.

author
#12 lore raw
In reply to John David Anglin
Quoted 8 lines · John David Anglin
Quoted 3 lines

I've installed the libc6 and libc6-dev debs on both c3k's and they both are working fine (well, mozilla-firebird is still broken, not new).

I don't know about firebird but standard mozilla needs some pa specific configuration stuff added before it will build/work. I made a first cut at this and started debugging the app a few weeks ago, but got caught up in other things.

I'm surprised that more things aren't broken, the typo in sysdep-cancel made all six argument syscalls unsuable :)

Thanks for the testing guys!

c.

author
#13 lore raw

[parisc-linux] (Round 2) hppa glibc 2.3.2-9 available for the brave testers (Round 2)!

In reply to Carlos O'Donell

debian-hppa,
parisc-linux,

New testing deb's can be found at:

ftp://ftp.parisc-linux.org/unofficial-debs/glibc_2.3.2-9_2003-10-20/

They fix the following problems encountered by testers:

- Six argument cancellable syscalls don't crash your program anymore.
- Calling feraiseexcept with FE_INEXACT raises the correct exception and flag bits.

Cheers,
Carlos.

Quoted 34 lines · Carlos O'Donell

--- CALLING ALL TESTERS! ---

glibc 2.3.2 is complete for HPPA. We've gotten rid of the following long standing test-suite errors (bug-iconv3, and test-fenv).

The regressions in 2.3.2 were caused by incorrect handling of the PIC register by the kernel, but fixed in glibc. Most cases for our stack were handled incorrectly (stack grows up cases), but are fixed in this release.

ftp://ftp.parisc-linux.org/unofficial-debs/glibc_2.3.2-9_2003-10-16/

Download all the debs and install with:

dpkg -i libc6_*.deb
(Followed by dpkg -i of the rest in any order, libc6 must install first)

Please do this only if you consider yourself a well seasoned linux-type person. If that dpkg install fails for any reason you might be in trouble. I'm running these debs on all my boxes, and I've tested in a chroot, rebuilt our toolchain, and ran lmbench, gnome-session, nautilus, and abi-word.

http://www.baldric.uwo.ca/~carlos/a500-gnome-abiword.png

Thanks go out to everyone for all the moral support and fun!

--- TEST IT AND REPORT BACK ... PLEASE! :) ---

== DISCLAIMER ===
I do not guarantee that these debs won't cause your computer to explode like a pineapple grenade, showering shrapnel and fiery death on all your loved ones.
== DISCLAIMER ===

author
#14 lore raw

[parisc-linux] (Round 2) hppa glibc 2.3.2-9 available for the brave testers (Round 2)!

In reply to Carlos O'Donell

debian-hppa,
parisc-linux,

New testing deb's can be found at:

ftp://ftp.parisc-linux.org/unofficial-debs/glibc_2.3.2-9_2003-10-20/

They fix the following problems encountered by testers:

- Six argument cancellable syscalls don't crash your program anymore.
- Calling feraiseexcept with FE_INEXACT raises the correct exception and flag bits.

Cheers,
Carlos.

Quoted 34 lines · Carlos O'Donell

--- CALLING ALL TESTERS! ---

glibc 2.3.2 is complete for HPPA. We've gotten rid of the following long standing test-suite errors (bug-iconv3, and test-fenv).

The regressions in 2.3.2 were caused by incorrect handling of the PIC register by the kernel, but fixed in glibc. Most cases for our stack were handled incorrectly (stack grows up cases), but are fixed in this release.

ftp://ftp.parisc-linux.org/unofficial-debs/glibc_2.3.2-9_2003-10-16/

Download all the debs and install with:

dpkg -i libc6_*.deb
(Followed by dpkg -i of the rest in any order, libc6 must install first)

Please do this only if you consider yourself a well seasoned linux-type person. If that dpkg install fails for any reason you might be in trouble. I'm running these debs on all my boxes, and I've tested in a chroot, rebuilt our toolchain, and ran lmbench, gnome-session, nautilus, and abi-word.

http://www.baldric.uwo.ca/~carlos/a500-gnome-abiword.png

Thanks go out to everyone for all the moral support and fun!

--- TEST IT AND REPORT BACK ... PLEASE! :) ---

== DISCLAIMER ===
I do not guarantee that these debs won't cause your computer to explode like a pineapple grenade, showering shrapnel and fiery death on all your loved ones.
== DISCLAIMER ===

#15 lore raw

RE: [parisc-linux] (Round 2) hppa glibc 2.3.2-9 available for the brave testers (Round 2)!

Hi Carlos,

I test it on my b180 running a k-2.4-23-pre7-pa12 (hosting a basic iptable fw and a squid proxy and it works fine now).

Thanks alot for this great job,
Joel

Quoted 10 lines

-- Original Message --
From: Carlos O'Donell <[email protected]>
To: [email protected]
Cc: [email protected]
Date: Mon, 20 Oct 2003 19:36:25 -0400
Subject: [parisc-linux] (Round 2) hppa glibc 2.3.2-9 available for the brave testers (Round 2)!

debian-hppa,

parisc-linux,

New testing deb's can be found at:

ftp://ftp.parisc-linux.org/unofficial-debs/glibc_2.3.2-9_2003-10-20/

They fix the following problems encountered by testers:

- Six argument cancellable syscalls don't crash you

Quoted 1 line

program anymore.

- Calling feraiseexcept with FE_INEXACT raises the correct exception and flag bits.

Cheers,
Carlos.

Quoted 32 lines · Carlos O'Donell

--- CALLING ALL TESTERS! ---

glibc 2.3.2 is comp
ete for HPPA. We've gotten rid of the following long standing test-suite errors (bug-iconv3, and test-fenv).

The regressions in 2.3.2 were caused by incorrect handling of the PIC register by the kernel, but fixed in glibc. Most cases for o r stack
were handled incorrectly (stack grows up cases), but are fixed in this release.

ftp://ftp.parisc-linux.org/unofficial-debs/glibc_2.3.2-9_2003-10-16/

Download all the debs and install with:

dpkg -i libc6_*.deb
(Foll
wed by dpkg -i of the rest in any order, libc6 must install first)

Please do this only if you consider yourself a well seasoned linux-type person. If that dpkg install fails for any reason you might be in trouble. I'm running these debs o
all my boxes, and I've tested in a
chroot, rebuilt our toolchain, and ran lmbench, gnome-session, nautilus, and abi-word.

http://www.baldric.uwo.ca/~carlos/a500-gnome-abiword.png

Thanks go out to everyone for all the moral support nd fun!

Quoted 8 lines

--- TEST IT AND REPORT BACK ... PLEASE! :) ---

== DISCLAIMER ===
I do not guarantee that these debs won't cause your computer to explode like a pineapple grenade, showering shrapnel and fiery death on all your loved ones

== DISCLAIMER ===

_______________________________________________
parisc-linux mailing list
[email protected]
http://lists.parisc-linux.org/mailman/listinfo/parisc-linux

-------------------------------------------------------------------------
Tiscali ADSL: 3 mois GRATUITS! L'Internet rapide, c'est pour tout le monde.

http://reg.tiscali.be/default.asp?lg=fr

#16 lore raw

RE: [parisc-linux] (Round 2) hppa glibc 2.3.2-9 available for the brave testers (Round 2)!

In reply to Carlos O'Donell

Hi Carlos,

I test it on my b180 running a k-2.4-23-pre7-pa12 (hosting a basic iptable fw and a squid proxy and it works fine now).

Thanks alot for this great job,
Joel

Quoted 10 lines

-- Original Message --
From: Carlos O'Donell <[email protected]>
To: [email protected]
Cc: [email protected]
Date: Mon, 20 Oct 2003 19:36:25 -0400
Subject: [parisc-linux] (Round 2) hppa glibc 2.3.2-9 available for the brave testers (Round 2)!

debian-hppa,

parisc-linux,

New testing deb's can be found at:

ftp://ftp.parisc-linux.org/unofficial-debs/glibc_2.3.2-9_2003-10-20/

They fix the following problems encountered by testers:

- Six argument cancellable syscalls don't crash you

Quoted 1 line

program anymore.

- Calling feraiseexcept with FE_INEXACT raises the correct exception and flag bits.

Cheers,
Carlos.

Quoted 32 lines · Carlos O'Donell

--- CALLING ALL TESTERS! ---

glibc 2.3.2 is comp
ete for HPPA. We've gotten rid of the following long standing test-suite errors (bug-iconv3, and test-fenv).

The regressions in 2.3.2 were caused by incorrect handling of the PIC register by the kernel, but fixed in glibc. Most cases for o r stack
were handled incorrectly (stack grows up cases), but are fixed in this release.

ftp://ftp.parisc-linux.org/unofficial-debs/glibc_2.3.2-9_2003-10-16/

Download all the debs and install with:

dpkg -i libc6_*.deb
(Foll
wed by dpkg -i of the rest in any order, libc6 must install first)

Please do this only if you consider yourself a well seasoned linux-type person. If that dpkg install fails for any reason you might be in trouble. I'm running these debs o
all my boxes, and I've tested in a
chroot, rebuilt our toolchain, and ran lmbench, gnome-session, nautilus, and abi-word.

http://www.baldric.uwo.ca/~carlos/a500-gnome-abiword.png

Thanks go out to everyone for all the moral support nd fun!

Quoted 8 lines

--- TEST IT AND REPORT BACK ... PLEASE! :) ---

== DISCLAIMER ===
I do not guarantee that these debs won't cause your computer to explode like a pineapple grenade, showering shrapnel and fiery death on all your loved ones

== DISCLAIMER ===

_______________________________________________
parisc-linux mailing list
[email protected]
http://lists.parisc-linux.org/mailman/listinfo/parisc-linux

-------------------------------------------------------------------------
Tiscali ADSL: 3 mois GRATUITS! L'Internet rapide, c'est pour tout le monde.

http://reg.tiscali.be/default.asp?lg=fr