2.6.0-test8-mm1 failure..
Hi to all!
This is my first post on LKML!!!
On my acer 272xv, 2.6.0-test6 works fine with mm series:
I've just tryed 2.6.0-test8-mm1 and I've got this failure at boot (last 100 lines of /var/log/messages):
Oct 20 17:34:46 D998 kernel: intel8x0_measure_ac97_clock: measured 49337 usecs Oct 20 17:34:46 D998 kernel: intel8x0: clocking to 48000 Oct 20 17:34:46 D998 kernel: NTFS driver 2.1.4 [Flags: R/O MODULE]. Oct 20 17:34:46 D998 kernel: NTFS volume version 3.1. Oct 20 17:34:46 D998 kernel: eth0: link down Oct 20 17:34:50 D998 kernel: Linux Kernel Card Services Oct 20 17:34:50 D998 kernel: options: [pci] [cardbus] [pm] Oct 20 17:34:50 D998 kernel: Intel PCIC probe: not found. Oct 20 17:34:50 D998 kernel: PCI: Found IRQ 10 for device 0000:00:09.0 Oct 20 17:34:50 D998 kernel: PCI: Sharing IRQ 10 with 0000:01:00.0 Oct 20 17:34:50 D998 kernel: Yenta: CardBus bridge found at 0000:00:09.0 [1025:001a] Oct 20 17:34:50 D998 kernel: Yenta: ISA IRQ list 0098, PCI irq10 Oct 20 17:34:50 D998 kernel: Socket status: 30000006 Oct 20 17:34:50 D998 kernel: PCI: Found IRQ 10 for device 0000:00:09.1 Oct 20 17:34:50 D998 kernel: PCI: Sharing IRQ 10 with 0000:00:06.0 Oct 20 17:34:50 D998 kernel: Yenta: CardBus bridge found at 0000:00:09.1 [1025:001a] Oct 20 17:34:51 D998 kernel: Yenta: ISA IRQ list 0000, PCI irq10 Oct 20 17:34:51 D998 kernel: Socket status: 30000006 Oct 20 17:34:51 D998 kernel: cs: IO port probe 0x0c00-0x0cff: clean. Oct 20 17:34:51 D998 kernel: cs: IO port probe 0x0800-0x08ff: clean. Oct 20 17:34:51 D998 kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x200-0x20f 0x3c0-0x3df 0x480-0x48f 0x4d0-0x4d7 Oct 20 17:34:51 D998 kernel: cs: IO port probe 0x0a00-0x0aff: clean. Oct 20 17:34:57 D998 kernel: printing eip: Oct 20 17:34:57 D998 kernel: 000067ae Oct 20 17:34:57 D998 kernel: Oops: 0004 [#1] Oct 20 17:34:57 D998 kernel: PREEMPT Oct 20 17:34:57 D998 kernel: CPU: 0 Oct 20 17:34:57 D998 kernel: EIP: c000:[<000067ae>] Not tainted VLI Oct 20 17:34:57 D998 kernel: EFLAGS: 00033246 Oct 20 17:34:57 D998 kernel: EIP is at 0x67ae Oct 20 17:34:57 D998 kernel: eax: 00004f00 ebx: 00000000 ecx: 00000000 edx: 00000000 Oct 20 17:34:57 D998 kernel: esi: 00000000 edi: 00002000 ebp: 00000fd6 esp: 1e825f24 Oct 20 17:34:57 D998 kernel: ds: 0000 es: 0000 ss: 0068 Oct 20 17:34:57 D998 kernel: Process XFree86 (pid: 337, threadinfo=1e824000 task=1e827940) Oct 20 17:34:57 D998 kernel: Stack: 00000fd0 00000100 00000000 00000000 00000000 00000000 00000000 00000000 Oct 20 17:34:57 D998 kernel: 00000005 ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff Oct 20 17:34:57 D998 kernel: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff Oct 20 17:34:57 D998 kernel: Call Trace: Oct 20 17:34:57 D998 kernel: Oct 20 17:34:57 D998 kernel: Code: Bad EIP value. Oct 20 17:34:59 D998 kernel: <1>Unable to handle kernel paging request at virtual address 00002000 Oct 20 17:34:59 D998 kernel: printing eip: Oct 20 17:34:59 D998 kernel: 000067ae Oct 20 17:34:59 D998 kernel: Oops: 0004 [#2] Oct 20 17:34:59 D998 kernel: PREEMPT Oct 20 17:34:59 D998 kernel: CPU: 0 Oct 20 17:34:59 D998 kernel: EIP: c000:[<000067ae>] Not tainted VLI Oct 20 17:34:59 D998 kernel: EFLAGS: 00033246 Oct 20 17:34:59 D998 kernel: EIP is at 0x67ae Oct 20 17:34:59 D998 kernel: eax: 00004f00 ebx: 00000000 ecx: 00000000 edx: 00000000 Oct 20 17:34:59 D998 kernel: esi: 00000000 edi: 00002000 ebp: 00000fd6 esp: 1e723f24 Oct 20 17:34:59 D998 kernel: ds: 0000 es: 0000 ss: 0068 Oct 20 17:34:59 D998 kernel: Process XFree86 (pid: 364, threadinfo=1e722000 task=1e827310) Oct 20 17:34:59 D998 kernel: Stack: 00000fd0 00000100 00000000 00000000 00000000 00000000 00000000 00000000 Oct 20 17:34:59 D998 kernel: 00000005 ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff Oct 20 17:34:59 D998 kernel: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff Oct 20 17:34:59 D998 kernel: Call Trace: Oct 20 17:34:59 D998 kernel: Oct 20 17:34:59 D998 kernel: Code: Bad EIP value. Oct 20 17:35:01 D998 kernel: <1>Unable to handle kernel paging request at virtual address 00002000 Oct 20 17:35:01 D998 kernel: printing eip: Oct 20 17:35:01 D998 kernel: 000067ae Oct 20 17:35:01 D998 kernel: Oops: 0004 [#3] Oct 20 17:35:01 D998 kernel: PREEMPT Oct 20 17:35:01 D998 kernel: CPU: 0 Oct 20 17:35:01 D998 kernel: EIP: c000:[<000067ae>] Not tainted VLI Oct 20 17:35:01 D998 kernel: EFLAGS: 00033246 Oct 20 17:35:01 D998 kernel: EIP is at 0x67ae Oct 20 17:35:01 D998 kernel: eax: 00004f00 ebx: 00000000 ecx: 00000000 edx: 00000000 Oct 20 17:35:01 D998 kernel: esi: 00000000 edi: 00002000 ebp: 00000fd6 esp: 1e825f24 Oct 20 17:35:01 D998 kernel: ds: 0000 es: 0000 ss: 0068 Oct 20 17:35:01 D998 kernel: Process XFree86 (pid: 368, threadinfo=1e824000 task=1e827940) Oct 20 17:35:01 D998 kernel: Stack: 00000fd0 00000100 00000000 00000000 00000000 00000000 00000000 00000000 Oct 20 17:35:01 D998 kernel: 00000005 ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff Oct 20 17:35:01 D998 kernel: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff Oct 20 17:35:01 D998 kernel: Call Trace: Oct 20 17:35:01 D998 kernel: Oct 20 17:35:01 D998 kernel: Code: Bad EIP value. Oct 20 17:35:03 D998 kernel: <1>Unable to handle kernel paging request at virtual address 00002000 Oct 20 17:35:03 D998 kernel: printing eip: Oct 20 17:35:03 D998 kernel: 000067ae Oct 20 17:35:03 D998 kernel: Oops: 0004 [#4] Oct 20 17:35:03 D998 kernel: PREEMPT Oct 20 17:35:03 D998 kernel: CPU: 0 Oct 20 17:35:03 D998 kernel: EIP: c000:[<000067ae>] Not tainted VLI Oct 20 17:35:03 D998 kernel: EFLAGS: 00033246 Oct 20 17:35:03 D998 kernel: EIP is at 0x67ae Oct 20 17:35:03 D998 kernel: eax: 00004f00 ebx: 00000000 ecx: 00000000 edx: 00000000 Oct 20 17:35:03 D998 kernel: esi: 00000000 edi: 00002000 ebp: 00000fd6 esp: 1e723f24 Oct 20 17:35:03 D998 kernel: ds: 0000 es: 0000 ss: 0068 Oct 20 17:35:03 D998 kernel: Process XFree86 (pid: 372, threadinfo=1e722000 task=1e827310) Oct 20 17:35:03 D998 kernel: Stack: 00000fd0 00000100 00000000 00000000 00000000 00000000 00000000 00000000 Oct 20 17:35:03 D998 kernel: 00000005 ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff Oct 20 17:35:03 D998 kernel: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff Oct 20 17:35:03 D998 kernel: Call Trace: Oct 20 17:35:03 D998 kernel: Oct 20 17:35:03 D998 kernel: Code: Bad EIP value. Oct 20 17:37:51 D998 kernel: spurious 8259A interrupt: IRQ7. Oct 20 17:38:01 D998 kernel: NET: Registered protocol family 10 Oct 20 17:38:01 D998 kernel: IPv6 over IPv4 tunneling driver
************************** Lspci -vvv output for 2.4.22-ck2 ******************
D998:/home/io# lspci -vvv
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 650 Host (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 64
Region 0: Memory at e8000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: [c0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans-
64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW-
Rate=<none>00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SiS 530 Virtual PCI-to-PCI bridge (AGP) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 99
Bus: primary=00, secondary=01, subordinate=01, sec-latency=68 I/O behind bridge: 0000a000-0000afff
Memory behind bridge: ec100000-ec1fffff
Prefetchable memory behind bridge: f0000000-f7ffffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:02.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 07) (prog-if 10 [OHCI])
Subsystem: Silicon Integrated Systems [SiS] USB 1.0 Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (20000ns max)
Interrupt: pin D routed to IRQ 11
Region 0: Memory at ec000000 (32-bit, non-prefetchable) [size=4K]00:02.3 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 07) (prog-if 10 [OHCI])
Subsystem: Silicon Integrated Systems [SiS] USB 1.0 Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (20000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at ec001000 (32-bit, non-prefetchable) [size=4K]00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0) (prog-if 80 [Master])
Subsystem: Silicon Integrated Systems [SiS] SiS5513 EIDE Controller
(A,B step)
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 128
Region 4: I/O ports at 9480 [size=16]00:02.6 Modem: Silicon Integrated Systems [SiS] Intel 537 [56k Winmodem] (rev a0) (prog-if 00 [Generic])
Subsystem: COMPAL Electronics Inc: Unknown device 0012
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 173 (13000ns min, 2750ns max)
Interrupt: pin C routed to IRQ 5
Region 0: I/O ports at 8400 [size=256]
Region 1: I/O ports at 9000 [size=128]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mAPME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0)
Subsystem: Acer Incorporated [ALI]: Unknown device 001a
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 173 (13000ns min, 2750ns max)
Interrupt: pin C routed to IRQ 5
Region 0: I/O ports at 8800 [size=256]
Region 1: I/O ports at 9080 [size=128]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mAPME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:05.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 46) (prog-if 10 [OHCI])
Subsystem: VIA Technologies, Inc. IEEE 1394 Host Controller
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 11
Region 0: Memory at ec002000 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at 9400 [size=128]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Acer Incorporated [ALI]: Unknown device 001a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 8c00 [size=256]
Region 1: Memory at ec002800 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:09.0 CardBus bridge: ENE Technology Inc CB1420 Cardbus Controller (rev 01)
Subsystem: Acer Incorporated [ALI]: Unknown device 001a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 168, Cache Line Size: 0x20 (128 bytes)
Interrupt: pin A routed to IRQ 5
Region 0: Memory at 1e000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=02, subordinate=02, sec-latency=176
Memory window 0: 1e400000-1e7ff000 (prefetchable)
Memory window 1: 1e800000-1ebff000
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 000100:09.1 CardBus bridge: ENE Technology Inc CB1420 Cardbus Controller (rev 01)
Subsystem: Acer Incorporated [ALI]: Unknown device 001a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 168, Cache Line Size: 0x20 (128 bytes)
Interrupt: pin B routed to IRQ 11
Region 0: Memory at 1e001000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=03, subordinate=03, sec-latency=176
Memory window 0: 1ec00000-1efff000 (prefetchable)
Memory window 1: 1f000000-1f3ff000
I/O window 0: 00004800-000048ff
I/O window 1: 00004c00-00004cff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 000101:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] SiS650/651/M650/740 PCI/AGP VGA Display Adapter (prog-if 00 [VGA])
Subsystem: Acer Incorporated [ALI]: Unknown device 001a
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 5
BIST result: 00
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M] Region 1: Memory at ec100000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at a000 [size=128]
Capabilities: [40] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mAPME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] AGP version 2.0
Status: RQ=16 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans-
64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW-
Rate=<none>
Obviously the graphical layout (xfree4.3-ds4) doesn't start. Did I forget anything in the .config?
Jorge
PS: sorry for all mistakes I made, I'm learning English!
Quoted 3 lines · Mario \"jorge\" Di Nitto
I've just tryed 2.6.0-test8-mm1 and I've got this failure at boot (last 100
lines of/var/log/messages):
Please set CONFIG_KALLSYMS=y and resend the oops trace so we can see where it crashed, thanks.
Hi Andrew,
Alle 21:00, lunedì 20 ottobre 2003, hai scritto:
Quoted 6 lines
Quoted 2 lines · Mario \"jorge\" Di Nitto
I've just tryed 2.6.0-test8-mm1 and I've got this failure at boot (last 100 lines of
/var/log/messages):Please set
CONFIG_KALLSYMS=yand resend the oops trace so we can see where it crashed, thanks.
I've changed some items in .config, and after next reboot I've got other failures like those I already wrote.
The last boot shows multiple oops (4 I think, in dmesg), see attached files for details.CONFIG_KALLSYMS was set in both last .config.
Regards,
Jorge
Linux version 2.6.0-test8-mm1 (root@D998) (gcc version 3.3.2 (Debian)) #3 Tue Oct 21 00:26:48 CEST 2003 Video mode to be used for restore is ffff
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000cc000 - 00000000000d0000 (reserved)
BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001def0000 (usable)
BIOS-e820: 000000001def0000 - 000000001deff000 (ACPI data)
BIOS-e820: 000000001deff000 - 000000001df00000 (ACPI NVS)
BIOS-e820: 000000001df00000 - 000000001e000000 (usable)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
480MB LOWMEM available.
On node 0 totalpages: 122880
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 118784 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI present.
ACPI: RSDP (v000 PTLTD ) @ 0x000f70b0
ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x1defaec7
ACPI: FADT (v001 SiS 650 0x06040000 PTL 0x000f4240) @ 0x1defef8c
ACPI: DSDT (v001 PTLTD BY25 0x06040000 MSFT 0x0100000e) @ 0x00000000
Building zonelist for node : 0
Kernel command line: BOOT_IMAGE=2.6-t8 ro root=304
No local APIC present or hardware disabled
mapped 4G/4G trampoline to fffeb000.
current: 023c9a60current->thread_info: 0245c000
Initializing CPU#0
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 1593.812 MHz processor.
Console: colour VGA+ 80x25
Memory: 480008k/491520k available (2348k kernel code, 10700k reserved, 1089k data, 188k init, 0k highmem) zapping low mappings.
Calibrating delay loop... 3145.72 BogoMIPS
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
Freeing initrd memory: 1908k freed CPU: After generic identify, caps: 3febf9ff 00000000 00000000 00000000 CPU: After vendor identify, caps: 3febf9ff 00000000 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: After all inits, caps: 3febf9ff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU#0: Thermal monitoring enabled
CPU: Intel(R) Pentium(R) 4 Mobile CPU 1.60GHz stepping 04
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfd98e, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20031002
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
Enabling SiS 96x SMBus.
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
ACPI: Embedded Controller [EC0] (gpe 23)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 7 10 11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *10 11)
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0x020f70f0
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x9e25, dseg 0x400
PnPBIOS: 18 nodes reported by PnP BIOS; 18 recorded by driver
SCSI subsystem initializeddrivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 5
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' Machine check exception polling timer started.
Total HugeTLB memory allocated, 0
ikconfig 0.7 with /proc/config*
devfs: v1.22 (20021013) Richard Gooch ([email protected])
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996 [email protected]).
udf: registering filesystem
Initializing Cryptographic API
pty: 256 Unix98 ptys configuredrequest_module: failed /sbin/modprobe -- parport_lowlevel. error = -16
lp: driver loaded but no devices found
Real Time Clock Driver v1.12
Non-volatile memory driver v1.2
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected SiS 650 chipset
agpgart: Maximum main memory to use for agp memory: 410M
agpgart: AGP aperture is 64M @ 0xe8000000
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
lp0: using parport0 (polling).
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
8139too Fast Ethernet driver 0.9.26
eth0: RealTek RTL8139 at 0x2082d800, 00:02:3f:ac:dc:96, IRQ 10
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 0000:00:02.5
SIS5513: chipset revision 208
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 961 MuTIOL IDE UDMA100 controller
ide0: BM-DMA at 0x9480-0x9487, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x9488-0x948f, BIOS settings: hdc:DMA, hdd:piohda: IC25N020ATCS04-0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: TOSHIBA DVD-ROM SD-C2502, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 39070080 sectors (20003 MB) w/1768KiB Cache, CHS=38760/16/63, UDMA(33)
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 > p3 p4
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: TOSHIBA Model: DVD-ROM SD-C2502 Rev: 1011
Type: CD-ROM ANSI SCSI revision: 02
sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 5
ohci1394: $Rev: 1045 $ Ben Collins <[email protected]>ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[5] MMIO=[ec002000-ec0027ff] Max Packet=[2048] drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1 drivers/usb/core/usb.c: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver...drivers/usb/core/usb.c: registered new driver usb-storage
USB Mass Storage support registered.drivers/usb/core/usb.c: registered new driver hiddev drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver drivers/usb/core/usb.c: registered new driver usbscanner drivers/usb/image/scanner.c: 0.4.15:USB Scanner Driver
mice: PS/2 mouse device common for all mice
input: PS/2 Generic Mouse on isa0060/serio1
serio: i8042 AUX port at 0x60,0x64 irq 12
input: AT Translated Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
I2O Core - (C) Copyright 1999 Red Hat Software
I2O: Event thread created as pid 15
i2o: Checking for PCI I2O controllers...
I2O configuration manager v 0.04.
(C) Copyright 1999 Red Hat Software
I2O Block Storage OSM v0.9
(c) Copyright 1999-2001 Red Hat Software.i2o_block: Checking for Boot device...i2o_block: Checking for I2O Block devices...
i2c /dev entries driver
Advanced Linux Sound Architecture Driver Version 0.9.7 (Thu Sep 25 19:16:36 2003 UTC).request_module: failed /sbin/modprobe -- snd-card-0. error = -16
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f261c0045e8] intel8x0_measure_ac97_clock: measured 49345 usecs
intel8x0: clocking to 48000
ALSA device list:
#0: SiS SI7012 at 0x8800, irq 5
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)ip_tables: (C) 2000-2002 Netfilter core team
NET: Registered protocol family 1
NET: Registered protocol family 17
PM: Reading pmdisk image.
PM: Resume from disk failed.
ACPI: (supports S0 S3 S4 S5)
RAMDISK: Couldn't find valid RAM disk image starting at 0.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 188k freed
Adding 257032k swap on /dev/hda3. Priority:-1 extents:1
EXT3 FS on hda4, internal journal
IA-32 Microcode Update Driver: v1.13 <[email protected]>
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT1] (battery absent)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Processor [CPU0] (supports C1 C2 C3, 8 throttling states)
[drm] Initialized sis 1.1.0 20030826 on minor 0
sisfb: Video ROM found and mapped to 020c0000
sisfb: Framebuffer at 0xf0000000, mapped to 0x20907000, size 32768k
sisfb: MMIO at 0xec100000, mapped to 0x20892000, size 128k
sisfb: Memory heap starting at 31744K
sisfb: Using MMIO queue mode
sisfb: Detected SiS302LV video bridge
sisfb: Detected LCD PanelDelayCompensation 1
sisfb: Default mode is 800x600x8 (60Hz)
sisfb: Initial vbflags 0x8000012
sisfb: Added MTRRs
sisfb: Installed SISFB_GET_INFO ioctl (80046ef8)
sisfb: Installed SISFB_GET_VBRSTATUS ioctl (80046ef9)
sisfb: 2D acceleration is enabled, scrolling mode ypan
fb0: SIS 65x/M65x/66xFX/M66xFX/74x VGA frame buffer device, Version 1.6.21
sisfb: (C) 2001-2003 Thomas Winischhofer. All rights reserved.
NTFS driver 2.1.4 [Flags: R/O MODULE].
NTFS volume version 3.1.
eth0: link down
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
Intel PCIC probe: not found.
Yenta: CardBus bridge found at 0000:00:09.0 [1025:001a]
Yenta: ISA IRQ list 0000, PCI irq10
Socket status: 30000006
Yenta: CardBus bridge found at 0000:00:09.1 [1025:001a]
Yenta: ISA IRQ list 0098, PCI irq10
Socket status: 30000006
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x200-0x20f 0x3c0-0x3df 0x480-0x48f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
Unable to handle kernel paging request at virtual address 00002000 printing eip: 000067ae *pde = 00000000 Oops: 0004 [#1] PREEMPT CPU: 0 EIP: c000:[<000067ae>] Not tainted VLI EFLAGS: 00033246
EIP is at 0x67ae
eax: 00004f00 ebx: 00000000 ecx: 00000000 edx: 00000000
esi: 00000000 edi: 00002000 ebp: 00000fd6 esp: 1fe6df24
ds: 0000 es: 0000 ss: 0068
Process XFree86 (pid: 351, threadinfo=1fe6c000 task=037006b0)
Stack: 00000fd0 00000100 00000000 00000000 00000000 00000000 00000000 00000000
00000005 ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
Call Trace:
Code: Bad EIP value.
<1>Unable to handle kernel paging request at virtual address 00002000
printing eip:
000067ae
*pde = 00000000
Oops: 0004 [#2]
PREEMPT
CPU: 0
EIP: c000:[<000067ae>] Not tainted VLI
EFLAGS: 00033246EIP is at 0x67ae
eax: 00004f00 ebx: 00000000 ecx: 00000000 edx: 00000000
esi: 00000000 edi: 00002000 ebp: 00000fd6 esp: 1e381f24
ds: 0000 es: 0000 ss: 0068
Process XFree86 (pid: 383, threadinfo=1e380000 task=1e383940)
Stack: 00000fd0 00000100 00000000 00000000 00000000 00000000 00000000 00000000
00000005 ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
Call Trace:
Code: Bad EIP value.
<1>Unable to handle kernel paging request at virtual address 00002000
printing eip:
000067ae
*pde = 00000000
Oops: 0004 [#3]
PREEMPT
CPU: 0
EIP: c000:[<000067ae>] Not tainted VLI
EFLAGS: 00033246EIP is at 0x67ae
eax: 00004f00 ebx: 00000000 ecx: 00000000 edx: 00000000
esi: 00000000 edi: 00002000 ebp: 00000fd6 esp: 1fe6df24
ds: 0000 es: 0000 ss: 0068
Process XFree86 (pid: 388, threadinfo=1fe6c000 task=037006b0)
Stack: 00000fd0 00000100 00000000 00000000 00000000 00000000 00000000 00000000
00000005 ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
Call Trace:
Code: Bad EIP value.
<1>Unable to handle kernel paging request at virtual address 00002000
printing eip:
000067ae
*pde = 00000000
Oops: 0004 [#4]
PREEMPT
CPU: 0
EIP: c000:[<000067ae>] Not tainted VLI
EFLAGS: 00033246EIP is at 0x67ae
eax: 00004f00 ebx: 00000000 ecx: 00000000 edx: 00000000
esi: 00000000 edi: 00002000 ebp: 00000fd6 esp: 1e3d1f24
ds: 0000 es: 0000 ss: 0068
Process XFree86 (pid: 393, threadinfo=1e3d0000 task=1e960080)
Stack: 00000fd0 00000100 00000000 00000000 00000000 00000000 00000000 00000000
00000005 ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
Call Trace:
Code: Bad EIP value.Oct 21 10:36:58 D998 kernel: RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Oct 21 10:36:58 D998 kernel: loop: loaded (max 8 devices) Oct 21 10:36:58 D998 kernel: PPP generic driver version 2.4.2 Oct 21 10:36:58 D998 kernel: PPP Deflate Compression module registered Oct 21 10:36:58 D998 kernel: PPP BSD Compression module registered Oct 21 10:36:58 D998 kernel: 8139too Fast Ethernet driver 0.9.26 Oct 21 10:36:58 D998 kernel: eth0: RealTek RTL8139 at 0x2082d800, 00:02:3f:ac:dc:96, IRQ 10 Oct 21 10:36:58 D998 kernel: eth0: Identified 8139 chip type 'RTL-8100B/8139D' Oct 21 10:36:58 D998 kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 Oct 21 10:36:58 D998 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Oct 21 10:36:58 D998 kernel: SIS5513: IDE controller at PCI slot 0000:00:02.5 Oct 21 10:36:58 D998 kernel: SIS5513: chipset revision 208 Oct 21 10:36:58 D998 kernel: SIS5513: not 100%% native mode: will probe irqs later Oct 21 10:36:58 D998 kernel: SIS5513: SiS 961 MuTIOL IDE UDMA100 controller Oct 21 10:36:58 D998 kernel: ide0: BM-DMA at 0x9480-0x9487, BIOS settings: hda:DMA, hdb:pio Oct 21 10:36:58 D998 kernel: ide1: BM-DMA at 0x9488-0x948f, BIOS settings: hdc:DMA, hdd:pio Oct 21 10:36:58 D998 kernel: hda: IC25N020ATCS04-0, ATA DISK drive Oct 21 10:36:58 D998 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Oct 21 10:36:58 D998 kernel: hdc: TOSHIBA DVD-ROM SD-C2502, ATAPI CD/DVD-ROM drive Oct 21 10:36:58 D998 kernel: ide1 at 0x170-0x177,0x376 on irq 15 Oct 21 10:36:58 D998 kernel: hda: max request size: 128KiB Oct 21 10:36:58 D998 kernel: hda: 39070080 sectors (20003 MB) w/1768KiB Cache, CHS=38760/16/63, UDMA(33) Oct 21 10:36:58 D998 kernel: /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 > p3 p4 Oct 21 10:36:58 D998 kernel: scsi0 : SCSI host adapter emulation for IDE ATAPI devices Oct 21 10:36:58 D998 kernel: Vendor: TOSHIBA Model: DVD-ROM SD-C2502 Rev: 1011 Oct 21 10:36:58 D998 kernel: Type: CD-ROM ANSI SCSI revision: 02 Oct 21 10:36:58 D998 kernel: sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray Oct 21 10:36:58 D998 kernel: Uniform CD-ROM driver Revision: 3.12 Oct 21 10:36:58 D998 kernel: Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 Oct 21 10:36:58 D998 kernel: Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 5 Oct 21 10:36:58 D998 kernel: ohci1394: $Rev: 1045 $ Ben Collins <[email protected]> Oct 21 10:36:58 D998 kernel: ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[5] MMIO=[ec002000-ec0027ff] Max Packet=[2048] Oct 21 10:36:58 D998 kernel: drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1 Oct 21 10:36:58 D998 kernel: drivers/usb/core/usb.c: registered new driver usblp Oct 21 10:36:58 D998 kernel: drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Oct 21 10:36:58 D998 kernel: Initializing USB Mass Storage driver... Oct 21 10:36:58 D998 kernel: drivers/usb/core/usb.c: registered new driver usb-storage Oct 21 10:36:58 D998 kernel: USB Mass Storage support registered. Oct 21 10:36:58 D998 kernel: drivers/usb/core/usb.c: registered new driver hiddev Oct 21 10:36:58 D998 kernel: drivers/usb/core/usb.c: registered new driver hid Oct 21 10:36:58 D998 kernel: drivers/usb/input/hid-core.c: v2.0:USB HID core driver Oct 21 10:36:58 D998 kernel: drivers/usb/core/usb.c: registered new driver usbscanner Oct 21 10:36:58 D998 kernel: drivers/usb/image/scanner.c: 0.4.15:USB Scanner Driver Oct 21 10:36:58 D998 kernel: mice: PS/2 mouse device common for all mice Oct 21 10:36:58 D998 kernel: input: PS/2 Generic Mouse on isa0060/serio1 Oct 21 10:36:58 D998 kernel: serio: i8042 AUX port at 0x60,0x64 irq 12 Oct 21 10:36:58 D998 kernel: input: AT Translated Set 2 keyboard on isa0060/serio0 Oct 21 10:36:58 D998 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1 Oct 21 10:36:58 D998 kernel: I2O Core - (C) Copyright 1999 Red Hat Software Oct 21 10:36:58 D998 kernel: I2O: Event thread created as pid 15 Oct 21 10:36:58 D998 kernel: i2o: Checking for PCI I2O controllers... Oct 21 10:36:58 D998 kernel: I2O configuration manager v 0.04. Oct 21 10:36:58 D998 kernel: (C) Copyright 1999 Red Hat Software Oct 21 10:36:58 D998 kernel: I2O Block Storage OSM v0.9 Oct 21 10:36:58 D998 kernel: (c) Copyright 1999-2001 Red Hat Software. Oct 21 10:36:58 D998 kernel: i2o_block: Checking for Boot device... Oct 21 10:36:58 D998 kernel: i2o_block: Checking for I2O Block devices... Oct 21 10:36:58 D998 kernel: i2c /dev entries driver Oct 21 10:36:58 D998 kernel: Advanced Linux Sound Architecture Driver Version 0.9.7 (Thu Sep 25 19:16:36 2003 UTC). Oct 21 10:36:58 D998 kernel: request_module: failed /sbin/modprobe -- snd-card-0. error = -16 Oct 21 10:36:58 D998 kernel: ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f261c0045e8] Oct 21 10:36:58 D998 kernel: intel8x0_measure_ac97_clock: measured 49345 usecs Oct 21 10:36:58 D998 kernel: intel8x0: clocking to 48000 Oct 21 10:36:58 D998 kernel: ALSA device list: Oct 21 10:36:58 D998 kernel: #0: SiS SI7012 at 0x8800, irq 5 Oct 21 10:36:58 D998 kernel: NET: Registered protocol family 2 Oct 21 10:36:58 D998 kernel: IP: routing cache hash table of 4096 buckets, 32Kbytes Oct 21 10:36:58 D998 kernel: TCP: Hash tables configured (established 32768 bind 65536) Oct 21 10:36:58 D998 kernel: ip_tables: (C) 2000-2002 Netfilter core team Oct 21 10:36:58 D998 kernel: NET: Registered protocol family 1 Oct 21 10:36:58 D998 kernel: NET: Registered protocol family 17 Oct 21 10:36:58 D998 kernel: PM: Reading pmdisk image. Oct 21 10:36:58 D998 kernel: PM: Resume from disk failed. Oct 21 10:36:58 D998 kernel: ACPI: (supports S0 S3 S4 S5) Oct 21 10:36:58 D998 kernel: RAMDISK: Couldn't find valid RAM disk image starting at 0. Oct 21 10:36:58 D998 kernel: kjournald starting. Commit interval 5 seconds Oct 21 10:36:58 D998 kernel: EXT3-fs: mounted filesystem with ordered data mode. Oct 21 10:36:58 D998 kernel: VFS: Mounted root (ext3 filesystem) readonly. Oct 21 10:36:58 D998 kernel: Mounted devfs on /dev Oct 21 10:36:58 D998 kernel: Freeing unused kernel memory: 188k freed Oct 21 10:36:58 D998 kernel: Adding 257032k swap on /dev/hda3. Priority:-1 extents:1 Oct 21 10:36:58 D998 kernel: EXT3 FS on hda4, internal journal Oct 21 10:36:58 D998 kernel: IA-32 Microcode Update Driver: v1.13 <[email protected]> Oct 21 10:36:58 D998 kernel: ACPI: AC Adapter [ACAD] (on-line) Oct 21 10:36:58 D998 kernel: ACPI: Battery Slot [BAT1] (battery absent) Oct 21 10:36:58 D998 kernel: ACPI: Power Button (FF) [PWRF] Oct 21 10:36:58 D998 kernel: ACPI: Lid Switch [LID] Oct 21 10:36:58 D998 kernel: ACPI: Processor [CPU0] (supports C1 C2 C3, 8 throttling states) Oct 21 10:36:58 D998 kernel: [drm] Initialized sis 1.1.0 20030826 on minor 0 Oct 21 10:36:58 D998 kernel: sisfb: Video ROM found and mapped to 020c0000 Oct 21 10:36:58 D998 kernel: sisfb: Framebuffer at 0xf0000000, mapped to 0x20907000, size 32768k Oct 21 10:36:58 D998 kernel: sisfb: MMIO at 0xec100000, mapped to 0x20892000, size 128k Oct 21 10:36:58 D998 kernel: sisfb: Memory heap starting at 31744K Oct 21 10:36:58 D998 kernel: sisfb: Using MMIO queue mode Oct 21 10:36:58 D998 kernel: sisfb: Detected SiS302LV video bridge Oct 21 10:36:58 D998 kernel: sisfb: Detected LCD PanelDelayCompensation 1 Oct 21 10:36:58 D998 kernel: sisfb: Default mode is 800x600x8 (60Hz) Oct 21 10:36:58 D998 kernel: sisfb: Initial vbflags 0x8000012 Oct 21 10:36:58 D998 kernel: sisfb: Added MTRRs Oct 21 10:36:58 D998 kernel: sisfb: Installed SISFB_GET_INFO ioctl (80046ef8) Oct 21 10:36:58 D998 kernel: sisfb: Installed SISFB_GET_VBRSTATUS ioctl (80046ef9) Oct 21 10:36:58 D998 kernel: sisfb: 2D acceleration is enabled, scrolling mode ypan Oct 21 10:36:58 D998 kernel: fb0: SIS 65x/M65x/66xFX/M66xFX/74x VGA frame buffer device, Version 1.6.21 Oct 21 10:36:58 D998 kernel: sisfb: (C) 2001-2003 Thomas Winischhofer. All rights reserved. Oct 21 10:36:58 D998 kernel: NTFS driver 2.1.4 [Flags: R/O MODULE]. Oct 21 10:36:58 D998 kernel: NTFS volume version 3.1. Oct 21 10:36:58 D998 kernel: eth0: link down Oct 21 10:37:03 D998 kernel: Linux Kernel Card Services Oct 21 10:37:03 D998 kernel: options: [pci] [cardbus] [pm] Oct 21 10:37:03 D998 kernel: Intel PCIC probe: not found. Oct 21 10:37:03 D998 kernel: Yenta: CardBus bridge found at 0000:00:09.0 [1025:001a] Oct 21 10:37:03 D998 kernel: Yenta: ISA IRQ list 0000, PCI irq10 Oct 21 10:37:03 D998 kernel: Socket status: 30000006 Oct 21 10:37:03 D998 kernel: Yenta: CardBus bridge found at 0000:00:09.1 [1025:001a] Oct 21 10:37:03 D998 kernel: Yenta: ISA IRQ list 0098, PCI irq10 Oct 21 10:37:03 D998 kernel: Socket status: 30000006 Oct 21 10:37:04 D998 kernel: cs: IO port probe 0x0c00-0x0cff: clean. Oct 21 10:37:04 D998 kernel: cs: IO port probe 0x0800-0x08ff: clean. Oct 21 10:37:04 D998 kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x200-0x20f 0x3c0-0x3df 0x480-0x48f 0x4d0-0x4d7 Oct 21 10:37:04 D998 kernel: cs: IO port probe 0x0a00-0x0aff: clean. Oct 21 10:37:10 D998 kernel: Unable to handle kernel paging request at virtual address 00002000 Oct 21 10:37:10 D998 kernel: printing eip: Oct 21 10:37:10 D998 kernel: 000067ae Oct 21 10:37:10 D998 kernel: *pde = 00000000 Oct 21 10:37:10 D998 kernel: Oops: 0004 [#1] Oct 21 10:37:10 D998 kernel: PREEMPT Oct 21 10:37:10 D998 kernel: CPU: 0 Oct 21 10:37:10 D998 kernel: EIP: c000:[<000067ae>] Not tainted VLI Oct 21 10:37:10 D998 kernel: EFLAGS: 00033246 Oct 21 10:37:10 D998 kernel: EIP is at 0x67ae Oct 21 10:37:10 D998 kernel: eax: 00004f00 ebx: 00000000 ecx: 00000000 edx: 00000000 Oct 21 10:37:10 D998 kernel: esi: 00000000 edi: 00002000 ebp: 00000fd6 esp: 1fe6df24 Oct 21 10:37:10 D998 kernel: ds: 0000 es: 0000 ss: 0068 Oct 21 10:37:10 D998 kernel: Process XFree86 (pid: 351, threadinfo=1fe6c000 task=037006b0) Oct 21 10:37:10 D998 kernel: Stack: 00000fd0 00000100 00000000 00000000 00000000 00000000 00000000 00000000 Oct 21 10:37:10 D998 kernel: 00000005 ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff Oct 21 10:37:10 D998 kernel: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff Oct 21 10:37:10 D998 kernel: Call Trace: Oct 21 10:37:10 D998 kernel: Oct 21 10:37:10 D998 kernel: Code: Bad EIP value. Oct 21 10:37:11 D998 kernel: <1>Unable to handle kernel paging request at virtual address 00002000 Oct 21 10:37:11 D998 kernel: printing eip: Oct 21 10:37:11 D998 kernel: 000067ae Oct 21 10:37:11 D998 kernel: *pde = 00000000 Oct 21 10:37:11 D998 kernel: Oops: 0004 [#2] Oct 21 10:37:11 D998 kernel: PREEMPT Oct 21 10:37:11 D998 kernel: CPU: 0 Oct 21 10:37:11 D998 kernel: EIP: c000:[<000067ae>] Not tainted VLI Oct 21 10:37:11 D998 kernel: EFLAGS: 00033246 Oct 21 10:37:11 D998 kernel: EIP is at 0x67ae Oct 21 10:37:11 D998 kernel: eax: 00004f00 ebx: 00000000 ecx: 00000000 edx: 00000000 Oct 21 10:37:11 D998 kernel: esi: 00000000 edi: 00002000 ebp: 00000fd6 esp: 1e381f24 Oct 21 10:37:11 D998 kernel: ds: 0000 es: 0000 ss: 0068 Oct 21 10:37:11 D998 kernel: Process XFree86 (pid: 383, threadinfo=1e380000 task=1e383940) Oct 21 10:37:11 D998 kernel: Stack: 00000fd0 00000100 00000000 00000000 00000000 00000000 00000000 00000000 Oct 21 10:37:11 D998 kernel: 00000005 ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff Oct 21 10:37:11 D998 kernel: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff Oct 21 10:37:11 D998 kernel: Call Trace: Oct 21 10:37:11 D998 kernel: Oct 21 10:37:11 D998 kernel: Code: Bad EIP value. Oct 21 10:37:13 D998 kernel: <1>Unable to handle kernel paging request at virtual address 00002000 Oct 21 10:37:13 D998 kernel: printing eip: Oct 21 10:37:13 D998 kernel: 000067ae Oct 21 10:37:13 D998 kernel: *pde = 00000000 Oct 21 10:37:13 D998 kernel: Oops: 0004 [#3] Oct 21 10:37:13 D998 kernel: PREEMPT Oct 21 10:37:13 D998 kernel: CPU: 0 Oct 21 10:37:13 D998 kernel: EIP: c000:[<000067ae>] Not tainted VLI Oct 21 10:37:13 D998 kernel: EFLAGS: 00033246 Oct 21 10:37:13 D998 kernel: EIP is at 0x67ae Oct 21 10:37:13 D998 kernel: eax: 00004f00 ebx: 00000000 ecx: 00000000 edx: 00000000 Oct 21 10:37:13 D998 kernel: esi: 00000000 edi: 00002000 ebp: 00000fd6 esp: 1fe6df24 Oct 21 10:37:13 D998 kernel: ds: 0000 es: 0000 ss: 0068 Oct 21 10:37:13 D998 kernel: Process XFree86 (pid: 388, threadinfo=1fe6c000 task=037006b0) Oct 21 10:37:13 D998 kernel: Stack: 00000fd0 00000100 00000000 00000000 00000000 00000000 00000000 00000000 Oct 21 10:37:13 D998 kernel: 00000005 ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff Oct 21 10:37:13 D998 kernel: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff Oct 21 10:37:13 D998 kernel: Call Trace: Oct 21 10:37:13 D998 kernel: Oct 21 10:37:13 D998 kernel: Code: Bad EIP value. Oct 21 10:37:15 D998 kernel: <1>Unable to handle kernel paging request at virtual address 00002000 Oct 21 10:37:15 D998 kernel: printing eip: Oct 21 10:37:15 D998 kernel: 000067ae Oct 21 10:37:15 D998 kernel: *pde = 00000000 Oct 21 10:37:15 D998 kernel: Oops: 0004 [#4] Oct 21 10:37:15 D998 kernel: PREEMPT Oct 21 10:37:15 D998 kernel: CPU: 0 Oct 21 10:37:15 D998 kernel: EIP: c000:[<000067ae>] Not tainted VLI Oct 21 10:37:15 D998 kernel: EFLAGS: 00033246 Oct 21 10:37:15 D998 kernel: EIP is at 0x67ae Oct 21 10:37:15 D998 kernel: eax: 00004f00 ebx: 00000000 ecx: 00000000 edx: 00000000 Oct 21 10:37:15 D998 kernel: esi: 00000000 edi: 00002000 ebp: 00000fd6 esp: 1e3d1f24 Oct 21 10:37:15 D998 kernel: ds: 0000 es: 0000 ss: 0068 Oct 21 10:37:15 D998 kernel: Process XFree86 (pid: 393, threadinfo=1e3d0000 task=1e960080) Oct 21 10:37:15 D998 kernel: Stack: 00000fd0 00000100 00000000 00000000 00000000 00000000 00000000 00000000 Oct 21 10:37:15 D998 kernel: 00000005 ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff Oct 21 10:37:15 D998 kernel: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff Oct 21 10:37:15 D998 kernel: Call Trace: Oct 21 10:37:15 D998 kernel: Oct 21 10:37:15 D998 kernel: Code: Bad EIP value.
#
# Automatically generated make config: don't edit
#CONFIG_X86=yCONFIG_MMU=yCONFIG_UID16=yCONFIG_GENERIC_ISA_DMA=y
#
# Code maturity level options
#CONFIG_EXPERIMENTAL=yCONFIG_CLEAN_COMPILE=y
# CONFIG_STANDALONE is not setCONFIG_BROKEN_ON_SMP=y
#
# General setup
#CONFIG_SWAP=yCONFIG_SYSVIPC=yCONFIG_BSD_PROCESS_ACCT=yCONFIG_SYSCTL=yCONFIG_LOG_BUF_SHIFT=14CONFIG_IKCONFIG=yCONFIG_IKCONFIG_PROC=y
# CONFIG_EMBEDDED is not setCONFIG_KALLSYMS=yCONFIG_FUTEX=yCONFIG_EPOLL=yCONFIG_IOSCHED_NOOP=yCONFIG_IOSCHED_AS=yCONFIG_IOSCHED_DEADLINE=yCONFIG_IOSCHED_CFQ=y
#
# Loadable module support
#CONFIG_MODULES=yCONFIG_MODULE_UNLOAD=yCONFIG_MODULE_FORCE_UNLOAD=yCONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not setCONFIG_KMOD=y
#
# Processor type and features
#CONFIG_X86_PC=y
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not setCONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not setCONFIG_X86_CMPXCHG=yCONFIG_X86_XADD=yCONFIG_X86_L1_CACHE_SHIFT=7CONFIG_RWSEM_XCHGADD_ALGORITHM=yCONFIG_X86_WP_WORKS_OK=yCONFIG_X86_INVLPG=yCONFIG_X86_BSWAP=yCONFIG_X86_POPAD_OK=yCONFIG_X86_GOOD_APIC=yCONFIG_X86_INTEL_USERCOPY=yCONFIG_X86_USE_PPRO_CHECKSUM=yCONFIG_X86_4G=yCONFIG_X86_SWITCH_PAGETABLES=yCONFIG_X86_4G_VM_LAYOUT=yCONFIG_X86_UACCESS_INDIRECT=yCONFIG_X86_HIGH_ENTRY=y
# CONFIG_HPET_TIMER is not set
# CONFIG_HPET_EMULATE_RTC is not set
# CONFIG_SMP is not setCONFIG_PREEMPT=yCONFIG_X86_UP_APIC=yCONFIG_X86_UP_IOAPIC=yCONFIG_X86_LOCAL_APIC=yCONFIG_X86_IO_APIC=yCONFIG_X86_TSC=yCONFIG_X86_MCE=yCONFIG_X86_MCE_NONFATAL=yCONFIG_X86_MCE_P4THERMAL=yCONFIG_TOSHIBA=mCONFIG_I8K=mCONFIG_MICROCODE=mCONFIG_X86_MSR=mCONFIG_X86_CPUID=mCONFIG_EDD=mCONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not setCONFIG_MTRR=yCONFIG_HAVE_DEC_LOCK=yCONFIG_BOOT_IOREMAP=y
#
# Power management options (ACPI, APM)
#CONFIG_PM=yCONFIG_SOFTWARE_SUSPEND=yCONFIG_PM_DISK=yCONFIG_PM_DISK_PARTITION=""
#
# ACPI (Advanced Configuration and Power Interface) Support #CONFIG_ACPI=yCONFIG_ACPI_BOOT=yCONFIG_ACPI_INTERPRETER=yCONFIG_ACPI_SLEEP=yCONFIG_ACPI_SLEEP_PROC_FS=yCONFIG_ACPI_AC=mCONFIG_ACPI_BATTERY=mCONFIG_ACPI_BUTTON=mCONFIG_ACPI_FAN=mCONFIG_ACPI_PROCESSOR=mCONFIG_ACPI_THERMAL=mCONFIG_ACPI_ASUS=mCONFIG_ACPI_TOSHIBA=m
# CONFIG_ACPI_DEBUG is not setCONFIG_ACPI_BUS=yCONFIG_ACPI_EC=yCONFIG_ACPI_POWER=yCONFIG_ACPI_PCI=yCONFIG_ACPI_SYSTEM=y
# CONFIG_ACPI_EFI is not set
# CONFIG_ACPI_RELAXED_AML is not set
#
# APM (Advanced Power Management) BIOS Support
#CONFIG_APM=m
# CONFIG_APM_IGNORE_USER_SUSPEND is not setCONFIG_APM_DO_ENABLE=yCONFIG_APM_CPU_IDLE=y
# CONFIG_APM_DISPLAY_BLANK is not set
# CONFIG_APM_RTC_IS_GMT is not set
# CONFIG_APM_ALLOW_INTS is not set
# CONFIG_APM_REAL_MODE_POWER_OFF is not set
#
# CPU Frequency scaling
#CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_PROC_INTF=m CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=m CONFIG_CPU_FREQ_GOV_USERSPACE=m CONFIG_CPU_FREQ_24_API=y CONFIG_CPU_FREQ_TABLE=y
#
# CPUFreq processor drivers
#CONFIG_X86_ACPI_CPUFREQ=m
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not setCONFIG_X86_SPEEDSTEP_CENTRINO=mCONFIG_X86_SPEEDSTEP_ICH=mCONFIG_X86_SPEEDSTEP_SMI=mCONFIG_X86_SPEEDSTEP_LIB=mCONFIG_X86_P4_CLOCKMOD=m
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not setCONFIG_PCI_GOANY=yCONFIG_PCI_BIOS=yCONFIG_PCI_DIRECT=y
# CONFIG_PCI_USE_VECTOR is not setCONFIG_PCI_LEGACY_PROC=yCONFIG_PCI_NAMES=yCONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not setCONFIG_HOTPLUG=y
#
# PCMCIA/CardBus support
#CONFIG_PCMCIA=mCONFIG_YENTA=mCONFIG_CARDBUS=yCONFIG_I82092=mCONFIG_I82365=mCONFIG_TCIC=mCONFIG_PCMCIA_PROBE=y
#
# PCI Hotplug Support
#CONFIG_HOTPLUG_PCI=mCONFIG_HOTPLUG_PCI_FAKE=mCONFIG_HOTPLUG_PCI_COMPAQ=mCONFIG_HOTPLUG_PCI_COMPAQ_NVRAM=yCONFIG_HOTPLUG_PCI_IBM=mCONFIG_HOTPLUG_PCI_ACPI=m
# CONFIG_HOTPLUG_PCI_CPCI is not set
#
# Executable file formats
#CONFIG_BINFMT_ELF=yCONFIG_BINFMT_AOUT=yCONFIG_BINFMT_MISC=y
#
# Device Drivers
#
#
# Generic Driver Options
#
# CONFIG_FW_LOADER is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#CONFIG_PARPORT=yCONFIG_PARPORT_PC=yCONFIG_PARPORT_PC_CML1=y
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not setCONFIG_PARPORT_PC_PCMCIA=mCONFIG_PARPORT_OTHER=yCONFIG_PARPORT_1284=y
#
# Plug and Play support
#CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
# CONFIG_ISAPNP is not setCONFIG_PNPBIOS=y
#
# Block devices
#CONFIG_BLK_DEV_FD=yCONFIG_BLK_DEV_XD=mCONFIG_PARIDE=mCONFIG_PARIDE_PARPORT=y
#
# Parallel IDE high-level drivers
#CONFIG_PARIDE_PD=mCONFIG_PARIDE_PCD=mCONFIG_PARIDE_PF=mCONFIG_PARIDE_PT=mCONFIG_PARIDE_PG=m
#
# Parallel IDE protocol modules
#CONFIG_PARIDE_ATEN=mCONFIG_PARIDE_BPCK=mCONFIG_PARIDE_BPCK6=mCONFIG_PARIDE_COMM=mCONFIG_PARIDE_DSTR=mCONFIG_PARIDE_FIT2=mCONFIG_PARIDE_FIT3=mCONFIG_PARIDE_EPAT=m
# CONFIG_PARIDE_EPATC8 is not setCONFIG_PARIDE_EPIA=mCONFIG_PARIDE_FRIQ=mCONFIG_PARIDE_FRPW=mCONFIG_PARIDE_KBIC=mCONFIG_PARIDE_KTTI=mCONFIG_PARIDE_ON20=mCONFIG_PARIDE_ON26=mCONFIG_BLK_CPQ_DA=mCONFIG_BLK_CPQ_CISS_DA=m
# CONFIG_CISS_SCSI_TAPE is not setCONFIG_BLK_DEV_DAC960=mCONFIG_BLK_DEV_UMEM=mCONFIG_BLK_DEV_LOOP=yCONFIG_BLK_DEV_CRYPTOLOOP=mCONFIG_BLK_DEV_NBD=mCONFIG_BLK_DEV_RAM=yCONFIG_BLK_DEV_RAM_SIZE=4096CONFIG_BLK_DEV_INITRD=yCONFIG_LBD=y
#
# ATA/ATAPI/MFM/RLL support
#CONFIG_IDE=yCONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives #
# CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=yCONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_IDEDISK_STROKE is not set CONFIG_BLK_DEV_IDECS=mCONFIG_BLK_DEV_IDECD=mCONFIG_BLK_DEV_IDETAPE=mCONFIG_BLK_DEV_IDEFLOPPY=mCONFIG_BLK_DEV_IDESCSI=yCONFIG_IDE_TASK_IOCTL=yCONFIG_IDE_TASKFILE_IO=y
#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_CMD640 is not setCONFIG_BLK_DEV_IDEPNP=yCONFIG_BLK_DEV_IDEPCI=yCONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not setCONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not setCONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDE_TCQ is not set
# CONFIG_BLK_DEV_IDEDMA_FORCED is not setCONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_IDEDMA_PCI_WIP is not setCONFIG_BLK_DEV_ADMA=yCONFIG_BLK_DEV_AEC62XX=mCONFIG_BLK_DEV_ALI15X3=m
# CONFIG_WDC_ALI15X3 is not setCONFIG_BLK_DEV_AMD74XX=mCONFIG_BLK_DEV_CMD64X=mCONFIG_BLK_DEV_TRIFLEX=mCONFIG_BLK_DEV_CY82C693=mCONFIG_BLK_DEV_CS5520=mCONFIG_BLK_DEV_CS5530=mCONFIG_BLK_DEV_HPT34X=mCONFIG_BLK_DEV_HPT366=mCONFIG_BLK_DEV_SC1200=mCONFIG_BLK_DEV_PIIX=mCONFIG_BLK_DEV_NS87415=mCONFIG_BLK_DEV_PDC202XX_OLD=mCONFIG_BLK_DEV_PDC202XX_NEW=mCONFIG_BLK_DEV_SVWKS=mCONFIG_BLK_DEV_SGIIOC4=mCONFIG_BLK_DEV_SIIMAGE=mCONFIG_BLK_DEV_SIS5513=yCONFIG_BLK_DEV_SLC90E66=mCONFIG_BLK_DEV_TRM290=mCONFIG_BLK_DEV_VIA82CXXX=m
# CONFIG_IDE_CHIPSETS is not setCONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not setCONFIG_IDEDMA_AUTO=y
# CONFIG_DMA_NONPCI is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#CONFIG_SCSI=yCONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=yCONFIG_MAX_SD_DISKS=256CONFIG_CHR_DEV_ST=m
# CONFIG_CHR_DEV_OSST is not setCONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not setCONFIG_CHR_DEV_SG=y
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs #
# CONFIG_SCSI_MULTI_LUN is not set CONFIG_SCSI_REPORT_LUNS=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# PCMCIA SCSI adapter support
#CONFIG_PCMCIA_AHA152X=mCONFIG_PCMCIA_FDOMAIN=mCONFIG_PCMCIA_NINJA_SCSI=mCONFIG_PCMCIA_QLOGIC=m
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#CONFIG_IEEE1394=y
#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_IEEE1394_OUI_DB is not set
#
# Device Drivers
#
# CONFIG_IEEE1394_PCILYNX is not setCONFIG_IEEE1394_OHCI1394=y
#
# Protocol Drivers
#CONFIG_IEEE1394_VIDEO1394=mCONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not setCONFIG_IEEE1394_ETH1394=mCONFIG_IEEE1394_DV1394=mCONFIG_IEEE1394_RAWIO=mCONFIG_IEEE1394_CMP=mCONFIG_IEEE1394_AMDTP=m
#
# I2O device support
#CONFIG_I2O=yCONFIG_I2O_PCI=yCONFIG_I2O_BLOCK=yCONFIG_I2O_SCSI=mCONFIG_I2O_PROC=y
#
# Networking support
#CONFIG_NET=y
#
# Networking options
#CONFIG_PACKET=yCONFIG_PACKET_MMAP=yCONFIG_NETLINK_DEV=mCONFIG_UNIX=yCONFIG_NET_KEY=mCONFIG_INET=yCONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not setCONFIG_NET_IPIP=mCONFIG_NET_IPGRE=m
# CONFIG_NET_IPGRE_BROADCAST is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not setCONFIG_INET_ECN=yCONFIG_SYN_COOKIES=yCONFIG_INET_AH=mCONFIG_INET_ESP=mCONFIG_INET_IPCOMP=m
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not setCONFIG_DECNET=m
# CONFIG_DECNET_SIOCGIFCONF is not set
# CONFIG_DECNET_ROUTER is not setCONFIG_BRIDGE=mCONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not setCONFIG_BRIDGE_NETFILTER=y
#
# IP: Netfilter Configuration
#CONFIG_IP_NF_CONNTRACK=mCONFIG_IP_NF_FTP=mCONFIG_IP_NF_IRC=mCONFIG_IP_NF_TFTP=mCONFIG_IP_NF_AMANDA=mCONFIG_IP_NF_QUEUE=mCONFIG_IP_NF_IPTABLES=yCONFIG_IP_NF_MATCH_LIMIT=mCONFIG_IP_NF_MATCH_IPRANGE=mCONFIG_IP_NF_MATCH_MAC=mCONFIG_IP_NF_MATCH_PKTTYPE=mCONFIG_IP_NF_MATCH_MARK=mCONFIG_IP_NF_MATCH_MULTIPORT=mCONFIG_IP_NF_MATCH_TOS=mCONFIG_IP_NF_MATCH_RECENT=mCONFIG_IP_NF_MATCH_ECN=mCONFIG_IP_NF_MATCH_DSCP=mCONFIG_IP_NF_MATCH_AH_ESP=mCONFIG_IP_NF_MATCH_LENGTH=mCONFIG_IP_NF_MATCH_TTL=mCONFIG_IP_NF_MATCH_TCPMSS=mCONFIG_IP_NF_MATCH_HELPER=mCONFIG_IP_NF_MATCH_STATE=mCONFIG_IP_NF_MATCH_CONNTRACK=mCONFIG_IP_NF_MATCH_OWNER=mCONFIG_IP_NF_MATCH_PHYSDEV=mCONFIG_IP_NF_FILTER=mCONFIG_IP_NF_TARGET_REJECT=mCONFIG_IP_NF_NAT=mCONFIG_IP_NF_NAT_NEEDED=yCONFIG_IP_NF_TARGET_MASQUERADE=mCONFIG_IP_NF_TARGET_REDIRECT=mCONFIG_IP_NF_TARGET_NETMAP=mCONFIG_IP_NF_TARGET_SAME=m
# CONFIG_IP_NF_NAT_LOCAL is not setCONFIG_IP_NF_NAT_SNMP_BASIC=mCONFIG_IP_NF_NAT_IRC=mCONFIG_IP_NF_NAT_FTP=mCONFIG_IP_NF_NAT_TFTP=mCONFIG_IP_NF_NAT_AMANDA=mCONFIG_IP_NF_MANGLE=mCONFIG_IP_NF_TARGET_TOS=mCONFIG_IP_NF_TARGET_ECN=mCONFIG_IP_NF_TARGET_DSCP=mCONFIG_IP_NF_TARGET_MARK=mCONFIG_IP_NF_TARGET_CLASSIFY=mCONFIG_IP_NF_TARGET_LOG=mCONFIG_IP_NF_TARGET_ULOG=mCONFIG_IP_NF_TARGET_TCPMSS=mCONFIG_IP_NF_ARPTABLES=mCONFIG_IP_NF_ARPFILTER=mCONFIG_IP_NF_ARP_MANGLE=m
#
# DECnet: Netfilter Configuration
#
# CONFIG_DECNET_NF_GRABULATOR is not set
#
# Bridge: Netfilter Configuration
#
# CONFIG_BRIDGE_NF_EBTABLES is not setCONFIG_XFRM=yCONFIG_XFRM_USER=m
#
# SCTP Configuration (EXPERIMENTAL)
#CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not setCONFIG_ATM=mCONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not setCONFIG_ATM_LANE=mCONFIG_ATM_MPOA=mCONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
# CONFIG_VLAN_8021Q is not setCONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_IPX is not setCONFIG_ATALK=mCONFIG_DEV_APPLETALK=y
# CONFIG_LTPC is not setCONFIG_COPS=m
# CONFIG_COPS_DAYNA is not set
# CONFIG_COPS_TANGENT is not setCONFIG_IPDDP=mCONFIG_IPDDP_ENCAP=yCONFIG_IPDDP_DECAP=y
# CONFIG_X25 is not setCONFIG_LAPB=m
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#CONFIG_NET_PKTGEN=mCONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not setCONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_ETHERTAP is not set
# CONFIG_NET_SB1000 is not set
#
# Ethernet (10 or 100Mbit)
#CONFIG_NET_ETHERNET=yCONFIG_MII=yCONFIG_HAPPYMEAL=mCONFIG_SUNGEM=m
# CONFIG_NET_VENDOR_3COM is not setCONFIG_LANCE=m
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not setCONFIG_AT1700=mCONFIG_DEPCA=mCONFIG_HP100=m
# CONFIG_NET_ISA is not setCONFIG_NET_PCI=yCONFIG_PCNET32=mCONFIG_AMD8111_ETH=mCONFIG_ADAPTEC_STARFIRE=mCONFIG_ADAPTEC_STARFIRE_NAPI=yCONFIG_AC3200=mCONFIG_APRICOT=mCONFIG_B44=m
CONFIG_CS89x0=mCONFIG_DGRS=mCONFIG_EEPRO100=mCONFIG_EEPRO100_PIO=yCONFIG_E100=mCONFIG_FEALNX=mCONFIG_NATSEMI=mCONFIG_NE2K_PCI=mCONFIG_8139CP=mCONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not setCONFIG_SIS900=mCONFIG_EPIC100=mCONFIG_SUNDANCE=mCONFIG_SUNDANCE_MMIO=yCONFIG_TLAN=mCONFIG_VIA_RHINE=m
# CONFIG_VIA_RHINE_MMIO is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not setCONFIG_PLIP=mCONFIG_PPP=y
# CONFIG_PPP_MULTILINK is not setCONFIG_PPP_FILTER=yCONFIG_PPP_ASYNC=yCONFIG_PPP_SYNC_TTY=yCONFIG_PPP_DEFLATE=yCONFIG_PPP_BSDCOMP=yCONFIG_PPPOE=mCONFIG_PPPOATM=mCONFIG_SLIP=m
# CONFIG_SLIP_COMPRESSED is not set
# CONFIG_SLIP_SMART is not set
# CONFIG_SLIP_MODE_SLIP6 is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not setCONFIG_SHAPER=m
# CONFIG_NET_POLL_CONTROLLER is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# PCMCIA network device support
#CONFIG_NET_PCMCIA=yCONFIG_PCMCIA_3C589=mCONFIG_PCMCIA_3C574=mCONFIG_PCMCIA_FMVJ18X=mCONFIG_PCMCIA_PCNET=mCONFIG_PCMCIA_NMCLAN=mCONFIG_PCMCIA_SMC91C92=mCONFIG_PCMCIA_XIRC2PS=mCONFIG_PCMCIA_AXNET=m
#
# ATM drivers
#
# CONFIG_ATM_TCP is not set
# CONFIG_ATM_LANAI is not set
# CONFIG_ATM_ENI is not set
# CONFIG_ATM_FIRESTREAM is not set
# CONFIG_ATM_ZATM is not set
# CONFIG_ATM_NICSTAR is not set
# CONFIG_ATM_IDT77252 is not set
# CONFIG_ATM_AMBASSADOR is not set
# CONFIG_ATM_HORIZON is not set
# CONFIG_ATM_IA is not set
# CONFIG_ATM_FORE200E_MAYBE is not set
# CONFIG_ATM_HE is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set
#
# Bluetooth support
#
# CONFIG_BT is not set
#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#CONFIG_INPUT=y
#
# Userland interfaces
#CONFIG_INPUT_MOUSEDEV=yCONFIG_INPUT_MOUSEDEV_PSAUX=yCONFIG_INPUT_MOUSEDEV_SCREEN_X=1024CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768CONFIG_INPUT_JOYDEV=mCONFIG_INPUT_TSDEV=mCONFIG_INPUT_TSDEV_SCREEN_X=240CONFIG_INPUT_TSDEV_SCREEN_Y=320CONFIG_INPUT_EVDEV=mCONFIG_INPUT_EVBUG=m
#
# Input I/O drivers
#CONFIG_GAMEPORT=mCONFIG_SOUND_GAMEPORT=mCONFIG_GAMEPORT_NS558=mCONFIG_GAMEPORT_L4=mCONFIG_GAMEPORT_EMU10K1=mCONFIG_GAMEPORT_VORTEX=mCONFIG_GAMEPORT_FM801=m
CONFIG_GAMEPORT_CS461x=mCONFIG_SERIO=yCONFIG_SERIO_I8042=yCONFIG_SERIO_SERPORT=mCONFIG_SERIO_CT82C710=mCONFIG_SERIO_PARKBD=mCONFIG_SERIO_PCIPS2=m
#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=yCONFIG_KEYBOARD_ATKBD=yCONFIG_KEYBOARD_SUNKBD=mCONFIG_KEYBOARD_XTKBD=mCONFIG_KEYBOARD_NEWTON=mCONFIG_INPUT_MOUSE=yCONFIG_MOUSE_PS2=yCONFIG_MOUSE_PS2_SYNAPTICS=yCONFIG_MOUSE_SERIAL=mCONFIG_MOUSE_INPORT=mCONFIG_MOUSE_ATIXL=yCONFIG_MOUSE_LOGIBM=mCONFIG_MOUSE_PC110PAD=m
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Character devices
#CONFIG_VT=yCONFIG_VT_CONSOLE=yCONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not set
# CONFIG_SERIAL_8250_CS is not set
# CONFIG_SERIAL_8250_ACPI is not setCONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#CONFIG_SERIAL_CORE=yCONFIG_UNIX98_PTYS=yCONFIG_UNIX98_PTY_COUNT=256CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not setCONFIG_PPDEV=mCONFIG_TIPAR=m
#
# I2C support
#CONFIG_I2C=yCONFIG_I2C_CHARDEV=y
#
# I2C Algorithms
#CONFIG_I2C_ALGOBIT=mCONFIG_I2C_ALGOPCF=m
#
# I2C Hardware Bus support
#CONFIG_I2C_ALI1535=mCONFIG_I2C_ALI15X3=mCONFIG_I2C_AMD756=mCONFIG_I2C_AMD8111=mCONFIG_I2C_ELEKTOR=mCONFIG_I2C_ELV=mCONFIG_I2C_I801=mCONFIG_I2C_I810=mCONFIG_I2C_ISA=mCONFIG_I2C_NFORCE2=mCONFIG_I2C_PHILIPSPAR=mCONFIG_I2C_PIIX4=mCONFIG_I2C_PROSAVAGE=mCONFIG_I2C_SAVAGE4=m
CONFIG_SCx200_ACB=mCONFIG_I2C_SIS5595=mCONFIG_I2C_SIS630=mCONFIG_I2C_SIS96X=mCONFIG_I2C_VELLEMAN=mCONFIG_I2C_VIA=mCONFIG_I2C_VIAPRO=mCONFIG_I2C_VOODOO3=m
#
# I2C Hardware Sensors Chip support
#CONFIG_I2C_SENSOR=mCONFIG_SENSORS_ADM1021=mCONFIG_SENSORS_EEPROM=mCONFIG_SENSORS_IT87=mCONFIG_SENSORS_LM75=mCONFIG_SENSORS_LM78=mCONFIG_SENSORS_LM85=mCONFIG_SENSORS_VIA686A=mCONFIG_SENSORS_W83781D=m
#
# Mice
#CONFIG_BUSMOUSE=mCONFIG_QIC02_TAPE=m
# CONFIG_QIC02_DYNCONF is not set
#
# Edit configuration parameters in ./include/linux/tpqic02.h! #
#
# IPMI
#CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not setCONFIG_IPMI_DEVICE_INTERFACE=mCONFIG_IPMI_KCS=mCONFIG_IPMI_WATCHDOG=m
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not setCONFIG_HW_RANDOM=mCONFIG_NVRAM=yCONFIG_RTC=yCONFIG_DTLK=mCONFIG_R3964=mCONFIG_APPLICOM=mCONFIG_SONYPI=m
#
# Ftape, the floppy tape device driver
#CONFIG_FTAPE=m
# CONFIG_ZFTAPE is not setCONFIG_FT_NR_BUFFERS=3
# CONFIG_FT_PROC_FS is not setCONFIG_FT_NORMAL_DEBUG=y
# CONFIG_FT_FULL_DEBUG is not set
# CONFIG_FT_NO_TRACE is not set
# CONFIG_FT_NO_TRACE_AT_ALL is not set
#
# Hardware configuration
#CONFIG_FT_STD_FDC=y
# CONFIG_FT_MACH2 is not set
# CONFIG_FT_PROBE_FC10 is not set
# CONFIG_FT_ALT_FDC is not setCONFIG_FT_FDC_THR=8CONFIG_FT_FDC_MAX_RATE=2000CONFIG_FT_ALPHA_CLOCK=0CONFIG_AGP=yCONFIG_AGP_ALI=mCONFIG_AGP_ATI=mCONFIG_AGP_AMD=mCONFIG_AGP_AMD64=mCONFIG_AGP_INTEL=mCONFIG_AGP_NVIDIA=mCONFIG_AGP_SIS=yCONFIG_AGP_SWORKS=mCONFIG_AGP_VIA=mCONFIG_DRM=yCONFIG_DRM_TDFX=mCONFIG_DRM_GAMMA=mCONFIG_DRM_R128=mCONFIG_DRM_RADEON=mCONFIG_DRM_I810=mCONFIG_DRM_I830=mCONFIG_DRM_MGA=mCONFIG_DRM_SIS=m
#
# PCMCIA character devices
#CONFIG_SYNCLINK_CS=mCONFIG_MWAVE=mCONFIG_RAW_DRIVER=mCONFIG_MAX_RAW_DEVS=256CONFIG_HANGCHECK_TIMER=m
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#CONFIG_FB=yCONFIG_FB_PM2=m
# CONFIG_FB_PM2_FIFO_DISCONNECT is not setCONFIG_FB_CYBER2000=m
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not setCONFIG_FB_VGA16=m
# CONFIG_FB_VESA is not set
# CONFIG_VIDEO_SELECT is not setCONFIG_FB_HGA=mCONFIG_FB_RIVA=mCONFIG_FB_I810=mCONFIG_FB_I810_GTF=yCONFIG_FB_MATROX=mCONFIG_FB_MATROX_MILLENIUM=yCONFIG_FB_MATROX_MYSTIQUE=yCONFIG_FB_MATROX_G450=yCONFIG_FB_MATROX_G100=yCONFIG_FB_MATROX_I2C=m
# CONFIG_FB_MATROX_MAVEN is not set
# CONFIG_FB_MATROX_MULTIHEAD is not setCONFIG_FB_RADEON=mCONFIG_FB_ATY128=mCONFIG_FB_ATY=m
# CONFIG_FB_ATY_CT is not set
# CONFIG_FB_ATY_GX is not setCONFIG_FB_SIS=mCONFIG_FB_SIS_300=yCONFIG_FB_SIS_315=yCONFIG_FB_NEOMAGIC=mCONFIG_FB_3DFX=mCONFIG_FB_VOODOO1=mCONFIG_FB_TRIDENT=mCONFIG_FB_VIRTUAL=m
#
# Console display driver support
#CONFIG_VGA_CONSOLE=yCONFIG_MDA_CONSOLE=mCONFIG_DUMMY_CONSOLE=yCONFIG_FRAMEBUFFER_CONSOLE=mCONFIG_PCI_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#CONFIG_LOGO=yCONFIG_LOGO_LINUX_MONO=yCONFIG_LOGO_LINUX_VGA16=yCONFIG_LOGO_LINUX_CLUT224=y
#
# Sound
#CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#CONFIG_SND=yCONFIG_SND_SEQUENCER=yCONFIG_SND_SEQ_DUMMY=mCONFIG_SND_OSSEMUL=yCONFIG_SND_MIXER_OSS=yCONFIG_SND_PCM_OSS=yCONFIG_SND_SEQUENCER_OSS=yCONFIG_SND_RTCTIMER=mCONFIG_SND_VERBOSE_PRINTK=y
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#CONFIG_SND_DUMMY=mCONFIG_SND_VIRMIDI=mCONFIG_SND_MTPAV=mCONFIG_SND_SERIAL_U16550=mCONFIG_SND_MPU401=m
#
# ISA devices
#CONFIG_SND_AD1848=mCONFIG_SND_CS4231=mCONFIG_SND_CS4232=mCONFIG_SND_CS4236=mCONFIG_SND_ES1688=mCONFIG_SND_ES18XX=mCONFIG_SND_GUSCLASSIC=mCONFIG_SND_GUSEXTREME=mCONFIG_SND_GUSMAX=mCONFIG_SND_INTERWAVE=mCONFIG_SND_INTERWAVE_STB=mCONFIG_SND_OPTI92X_AD1848=mCONFIG_SND_OPTI92X_CS4231=mCONFIG_SND_OPTI93X=mCONFIG_SND_SB8=mCONFIG_SND_SB16=mCONFIG_SND_SBAWE=mCONFIG_SND_SB16_CSP=yCONFIG_SND_WAVEFRONT=mCONFIG_SND_CMI8330=mCONFIG_SND_OPL3SA2=mCONFIG_SND_SGALAXY=mCONFIG_SND_SSCAPE=m
#
# PCI devices
#CONFIG_SND_ALI5451=mCONFIG_SND_AZT3328=mCONFIG_SND_CS46XX=mCONFIG_SND_CS46XX_NEW_DSP=yCONFIG_SND_CS4281=mCONFIG_SND_EMU10K1=mCONFIG_SND_KORG1212=mCONFIG_SND_NM256=mCONFIG_SND_RME32=mCONFIG_SND_RME96=mCONFIG_SND_RME9652=mCONFIG_SND_HDSP=mCONFIG_SND_TRIDENT=mCONFIG_SND_YMFPCI=mCONFIG_SND_ALS4000=mCONFIG_SND_CMIPCI=mCONFIG_SND_ENS1370=mCONFIG_SND_ENS1371=mCONFIG_SND_ES1938=mCONFIG_SND_ES1968=mCONFIG_SND_MAESTRO3=mCONFIG_SND_FM801=mCONFIG_SND_ICE1712=mCONFIG_SND_ICE1724=mCONFIG_SND_INTEL8X0=yCONFIG_SND_SONICVIBES=mCONFIG_SND_VIA82XX=mCONFIG_SND_VX222=m
#
# ALSA USB devices
#CONFIG_SND_USB_AUDIO=m
#
# PCMCIA devices
#CONFIG_SND_VXPOCKET=mCONFIG_SND_VXP440=m
#
# Open Sound System
#CONFIG_SOUND_PRIME=mCONFIG_SOUND_BT878=mCONFIG_SOUND_CMPCI=m CONFIG_SOUND_CMPCI_FM=y CONFIG_SOUND_CMPCI_FMIO=388
# CONFIG_SOUND_CMPCI_MIDI is not set
# CONFIG_SOUND_CMPCI_JOYSTICK is not set
# CONFIG_SOUND_CMPCI_CM8738 is not set CONFIG_SOUND_EMU10K1=m
# CONFIG_MIDI_EMU10K1 is not set CONFIG_SOUND_FUSION=mCONFIG_SOUND_CS4281=mCONFIG_SOUND_ES1370=mCONFIG_SOUND_ES1371=m CONFIG_SOUND_ESSSOLO1=m CONFIG_SOUND_MAESTRO=m CONFIG_SOUND_MAESTRO3=mCONFIG_SOUND_ICH=m CONFIG_SOUND_SONICVIBES=m CONFIG_SOUND_TRIDENT=m CONFIG_SOUND_MSNDCLAS=m CONFIG_MSNDCLAS_INIT_FILE="/etc/sound/msndinit.bin" CONFIG_MSNDCLAS_PERM_FILE="/etc/sound/msndperm.bin" CONFIG_SOUND_MSNDPIN=m CONFIG_MSNDPIN_INIT_FILE="/etc/sound/pndspini.bin" CONFIG_MSNDPIN_PERM_FILE="/etc/sound/pndsperm.bin" CONFIG_SOUND_VIA82CXXX=m
# CONFIG_MIDI_VIA82CXXX is not set CONFIG_SOUND_OSS=m
# CONFIG_SOUND_TRACEINIT is not set
# CONFIG_SOUND_DMAP is not set CONFIG_SOUND_AD1816=mCONFIG_SOUND_AD1889=m CONFIG_SOUND_SGALAXY=mCONFIG_SOUND_ADLIB=m CONFIG_SOUND_ACI_MIXER=m CONFIG_SOUND_CS4232=mCONFIG_SOUND_SSCAPE=mCONFIG_SOUND_GUS=mCONFIG_SOUND_GUS16=yCONFIG_SOUND_GUSMAX=yCONFIG_SOUND_VMIDI=mCONFIG_SOUND_TRIX=mCONFIG_SOUND_MSS=mCONFIG_SOUND_MPU401=mCONFIG_SOUND_NM256=mCONFIG_SOUND_MAD16=m
# CONFIG_MAD16_OLDCARD is not set CONFIG_SOUND_PAS=mCONFIG_SOUND_PSS=mCONFIG_PSS_MIXER=y
# CONFIG_PSS_HAVE_BOOT is not set CONFIG_SOUND_SB=m CONFIG_SOUND_AWE32_SYNTH=m CONFIG_SOUND_WAVEFRONT=m CONFIG_SOUND_MAUI=mCONFIG_SOUND_YM3812=m CONFIG_SOUND_OPL3SA1=m CONFIG_SOUND_OPL3SA2=m CONFIG_SOUND_YMFPCI=m CONFIG_SOUND_YMFPCI_LEGACY=y CONFIG_SOUND_UART6850=m CONFIG_SOUND_AEDSP16=mCONFIG_SC6600=yCONFIG_SC6600_JOY=yCONFIG_SC6600_CDROM=4 CONFIG_SC6600_CDROMBASE=0
# CONFIG_AEDSP16_MSS is not set
# CONFIG_AEDSP16_SBPRO is not set
# CONFIG_AEDSP16_MPU401 is not set CONFIG_SOUND_TVMIXER=m CONFIG_SOUND_KAHLUA=m CONFIG_SOUND_ALI5455=mCONFIG_SOUND_FORTE=mCONFIG_SOUND_RME96XX=m CONFIG_SOUND_AD1980=m
#
# USB support
#CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#CONFIG_USB_DEVICEFS=yCONFIG_USB_BANDWIDTH=yCONFIG_USB_DYNAMIC_MINORS=y
#
# USB Host Controller Drivers
#CONFIG_USB_EHCI_HCD=yCONFIG_USB_OHCI_HCD=mCONFIG_USB_UHCI_HCD=y
#
# USB Device Class drivers
#CONFIG_USB_AUDIO=mCONFIG_USB_BLUETOOTH_TTY=mCONFIG_USB_MIDI=mCONFIG_USB_ACM=mCONFIG_USB_PRINTER=yCONFIG_USB_STORAGE=yCONFIG_USB_STORAGE_DEBUG=y
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
CONFIG_USB_STORAGE_HP8200e=y
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
#
# USB Human Interface Devices (HID)
#CONFIG_USB_HID=yCONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not setCONFIG_USB_HIDDEV=yCONFIG_USB_AIPTEK=mCONFIG_USB_WACOM=mCONFIG_USB_KBTAB=mCONFIG_USB_POWERMATE=mCONFIG_USB_XPAD=m
#
# USB Imaging devices
#CONFIG_USB_MDC800=mCONFIG_USB_SCANNER=yCONFIG_USB_MICROTEK=mCONFIG_USB_HPUSBSCSI=m
#
# USB Multimedia devices
#CONFIG_USB_DABUSB=m
#
# Video4Linux support is needed for USB Multimedia device support #
#
# USB Network adaptors
#CONFIG_USB_CATC=mCONFIG_USB_KAWETH=mCONFIG_USB_PEGASUS=mCONFIG_USB_RTL8150=mCONFIG_USB_USBNET=m
#
# USB Host-to-Host Cables
#CONFIG_USB_AN2720=yCONFIG_USB_BELKIN=yCONFIG_USB_GENESYS=yCONFIG_USB_NET1080=yCONFIG_USB_PL2301=y
#
# Intelligent USB Devices/Gadgets
#CONFIG_USB_ARMLINUX=yCONFIG_USB_EPSON2888=yCONFIG_USB_ZAURUS=yCONFIG_USB_CDCETHER=y
#
# USB Network Adapters
#CONFIG_USB_AX8817X=y
#
# USB port drivers
#CONFIG_USB_USS720=m
#
# USB Serial Converter support
#CONFIG_USB_SERIAL=m
# CONFIG_USB_SERIAL_GENERIC is not setCONFIG_USB_SERIAL_BELKIN=mCONFIG_USB_SERIAL_WHITEHEAT=mCONFIG_USB_SERIAL_DIGI_ACCELEPORT=mCONFIG_USB_SERIAL_EMPEG=mCONFIG_USB_SERIAL_FTDI_SIO=mCONFIG_USB_SERIAL_VISOR=mCONFIG_USB_SERIAL_IPAQ=mCONFIG_USB_SERIAL_IR=mCONFIG_USB_SERIAL_EDGEPORT=mCONFIG_USB_SERIAL_EDGEPORT_TI=mCONFIG_USB_SERIAL_KEYSPAN_PDA=mCONFIG_USB_SERIAL_KEYSPAN=mCONFIG_USB_SERIAL_KEYSPAN_MPR=yCONFIG_USB_SERIAL_KEYSPAN_USA28=yCONFIG_USB_SERIAL_KEYSPAN_USA28X=yCONFIG_USB_SERIAL_KEYSPAN_USA28XA=yCONFIG_USB_SERIAL_KEYSPAN_USA28XB=yCONFIG_USB_SERIAL_KEYSPAN_USA19=yCONFIG_USB_SERIAL_KEYSPAN_USA18X=yCONFIG_USB_SERIAL_KEYSPAN_USA19W=yCONFIG_USB_SERIAL_KEYSPAN_USA19QW=yCONFIG_USB_SERIAL_KEYSPAN_USA19QI=yCONFIG_USB_SERIAL_KEYSPAN_USA49W=yCONFIG_USB_SERIAL_KEYSPAN_USA49WLC=yCONFIG_USB_SERIAL_KLSI=mCONFIG_USB_SERIAL_KOBIL_SCT=mCONFIG_USB_SERIAL_MCT_U232=mCONFIG_USB_SERIAL_PL2303=mCONFIG_USB_SERIAL_SAFE=mCONFIG_USB_SERIAL_SAFE_PADDED=yCONFIG_USB_SERIAL_CYBERJACK=mCONFIG_USB_SERIAL_XIRCOM=mCONFIG_USB_SERIAL_OMNINET=mCONFIG_USB_EZUSB=y
#
# USB Miscellaneous drivers
#CONFIG_USB_EMI26=mCONFIG_USB_TIGL=mCONFIG_USB_AUERSWALD=mCONFIG_USB_RIO500=mCONFIG_USB_BRLVGER=mCONFIG_USB_LCD=mCONFIG_USB_SPEEDTOUCH=mCONFIG_USB_TEST=mCONFIG_USB_GADGET=mCONFIG_USB_NET2280=mCONFIG_USB_ZERO=mCONFIG_USB_ZERO_NET2280=yCONFIG_USB_ETH=mCONFIG_USB_ETH_NET2280=yCONFIG_USB_GADGETFS=mCONFIG_USB_GADGETFS_NET2280=y
#
# File systems
#CONFIG_EXT2_FS=yCONFIG_EXT2_FS_XATTR=yCONFIG_EXT2_FS_POSIX_ACL=yCONFIG_EXT2_FS_SECURITY=yCONFIG_EXT3_FS=yCONFIG_EXT3_FS_XATTR=yCONFIG_EXT3_FS_POSIX_ACL=yCONFIG_EXT3_FS_SECURITY=yCONFIG_JBD=yCONFIG_JBD_DEBUG=yCONFIG_FS_MBCACHE=yCONFIG_REISERFS_FS=mCONFIG_REISERFS_CHECK=y
# CONFIG_REISERFS_PROC_INFO is not setCONFIG_JFS_FS=mCONFIG_JFS_POSIX_ACL=y
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not setCONFIG_FS_POSIX_ACL=yCONFIG_XFS_FS=m
# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_POSIX_ACL is not setCONFIG_MINIX_FS=mCONFIG_ROMFS_FS=m
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not setCONFIG_AUTOFS4_FS=y
#
# CD-ROM/DVD Filesystems
#CONFIG_ISO9660_FS=yCONFIG_JOLIET=yCONFIG_ZISOFS=yCONFIG_ZISOFS_FS=yCONFIG_UDF_FS=y
#
# DOS/FAT/NT Filesystems
#CONFIG_FAT_FS=yCONFIG_MSDOS_FS=yCONFIG_VFAT_FS=yCONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#CONFIG_PROC_FS=yCONFIG_PROC_KCORE=yCONFIG_DEVFS_FS=yCONFIG_DEVFS_MOUNT=y
# CONFIG_DEVFS_DEBUG is not setCONFIG_DEVPTS_FS=y
# CONFIG_DEVPTS_FS_XATTR is not setCONFIG_TMPFS=yCONFIG_HUGETLBFS=yCONFIG_HUGETLB_PAGE=yCONFIG_RAMFS=y
#
# Miscellaneous filesystems
#CONFIG_ADFS_FS=m
# CONFIG_ADFS_FS_RW is not setCONFIG_AFFS_FS=mCONFIG_HFS_FS=mCONFIG_BEFS_FS=mCONFIG_BEFS_DEBUG=yCONFIG_BFS_FS=mCONFIG_EFS_FS=mCONFIG_CRAMFS=mCONFIG_VXFS_FS=mCONFIG_HPFS_FS=mCONFIG_QNX4FS_FS=m
# CONFIG_QNX4FS_RW is not setCONFIG_SYSV_FS=mCONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
#
# Network File Systems
#CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not setCONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not setCONFIG_NFSD=y
# CONFIG_NFSD_V3 is not set
# CONFIG_NFSD_TCP is not setCONFIG_LOCKD=yCONFIG_EXPORTFS=yCONFIG_SUNRPC=y
# CONFIG_SUNRPC_GSS is not setCONFIG_SMB_FS=y
# CONFIG_SMB_NLS_DEFAULT is not setCONFIG_CIFS=mCONFIG_NCP_FS=m
# CONFIG_NCPFS_PACKET_SIGNING is not set
# CONFIG_NCPFS_IOCTL_LOCKING is not set
# CONFIG_NCPFS_STRONG is not set
# CONFIG_NCPFS_NFS_NS is not set
# CONFIG_NCPFS_OS2_NS is not set
# CONFIG_NCPFS_SMALLDOS is not set
# CONFIG_NCPFS_NLS is not set
# CONFIG_NCPFS_EXTRAS is not setCONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not setCONFIG_INTERMEZZO_FS=mCONFIG_AFS_FS=mCONFIG_RXRPC=m
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not setCONFIG_MSDOS_PARTITION=yCONFIG_SMB_NLS=yCONFIG_NLS=y
#
# Native Language Support
#CONFIG_NLS_DEFAULT="iso8859-1"CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not setCONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not setCONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not setCONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Profiling support
#CONFIG_PROFILING=yCONFIG_OPROFILE=m
#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not setCONFIG_DEBUG_SPINLOCK_SLEEP=yCONFIG_FRAME_POINTER=yCONFIG_X86_EXTRA_IRQS=yCONFIG_X86_FIND_SMP_CONFIG=yCONFIG_X86_MPPARSE=y
#
# Security options
#
# CONFIG_SECURITY is not set
#
# Cryptographic options
#CONFIG_CRYPTO=yCONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not setCONFIG_CRYPTO_MD5=mCONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not setCONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not setCONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_TEST is not set
#
# Library routines
#CONFIG_CRC32=yCONFIG_ZLIB_INFLATE=yCONFIG_ZLIB_DEFLATE=yCONFIG_X86_BIOS_REBOOT=yCONFIG_PC=y
Hi Andrew,
I resend you last email I wrote, hoping it helps to resolve oops found, because didn't have any feedback.
----
Hi Andrew,
Alle 21:00, lunedì 20 ottobre 2003, hai scritto:
Quoted 6 lines
Quoted 2 lines · Mario \"jorge\" Di Nitto
I've just tryed 2.6.0-test8-mm1 and I've got this failure at boot (last 100 lines of
/var/log/messages):Please set
CONFIG_KALLSYMS=yand resend the oops trace so we can see where it crashed, thanks.
I've changed some items in .config, and after next reboot I've got other failures like those I already wrote.
The last boot shows multiple oops (4 I think, in dmesg), see attached files for details.CONFIG_KALLSYMS was set in both last .config.
Regards,
Jorge
Linux version 2.6.0-test8-mm1 (root@D998) (gcc version 3.3.2 (Debian)) #3 Tue Oct 21 00:26:48 CEST 2003 Video mode to be used for restore is ffff
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000cc000 - 00000000000d0000 (reserved)
BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001def0000 (usable)
BIOS-e820: 000000001def0000 - 000000001deff000 (ACPI data)
BIOS-e820: 000000001deff000 - 000000001df00000 (ACPI NVS)
BIOS-e820: 000000001df00000 - 000000001e000000 (usable)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
480MB LOWMEM available.
On node 0 totalpages: 122880
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 118784 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI present.
ACPI: RSDP (v000 PTLTD ) @ 0x000f70b0
ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x1defaec7
ACPI: FADT (v001 SiS 650 0x06040000 PTL 0x000f4240) @ 0x1defef8c
ACPI: DSDT (v001 PTLTD BY25 0x06040000 MSFT 0x0100000e) @ 0x00000000
Building zonelist for node : 0
Kernel command line: BOOT_IMAGE=2.6-t8 ro root=304
No local APIC present or hardware disabled
mapped 4G/4G trampoline to fffeb000.
current: 023c9a60current->thread_info: 0245c000
Initializing CPU#0
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 1593.812 MHz processor.
Console: colour VGA+ 80x25
Memory: 480008k/491520k available (2348k kernel code, 10700k reserved, 1089k data, 188k init, 0k highmem) zapping low mappings.
Calibrating delay loop... 3145.72 BogoMIPS
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
Freeing initrd memory: 1908k freed CPU: After generic identify, caps: 3febf9ff 00000000 00000000 00000000 CPU: After vendor identify, caps: 3febf9ff 00000000 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: After all inits, caps: 3febf9ff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU#0: Thermal monitoring enabled
CPU: Intel(R) Pentium(R) 4 Mobile CPU 1.60GHz stepping 04
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfd98e, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20031002
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
Enabling SiS 96x SMBus.
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
ACPI: Embedded Controller [EC0] (gpe 23)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 7 10 11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *10 11)
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0x020f70f0
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x9e25, dseg 0x400
PnPBIOS: 18 nodes reported by PnP BIOS; 18 recorded by driver
SCSI subsystem initializeddrivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 5
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' Machine check exception polling timer started.
Total HugeTLB memory allocated, 0
ikconfig 0.7 with /proc/config*
devfs: v1.22 (20021013) Richard Gooch ([email protected])
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996 [email protected]).
udf: registering filesystem
Initializing Cryptographic API
pty: 256 Unix98 ptys configuredrequest_module: failed /sbin/modprobe -- parport_lowlevel. error = -16
lp: driver loaded but no devices found
Real Time Clock Driver v1.12
Non-volatile memory driver v1.2
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected SiS 650 chipset
agpgart: Maximum main memory to use for agp memory: 410M
agpgart: AGP aperture is 64M @ 0xe8000000
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
lp0: using parport0 (polling).
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
8139too Fast Ethernet driver 0.9.26
eth0: RealTek RTL8139 at 0x2082d800, 00:02:3f:ac:dc:96, IRQ 10
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 0000:00:02.5
SIS5513: chipset revision 208
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 961 MuTIOL IDE UDMA100 controller
ide0: BM-DMA at 0x9480-0x9487, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x9488-0x948f, BIOS settings: hdc:DMA, hdd:piohda: IC25N020ATCS04-0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: TOSHIBA DVD-ROM SD-C2502, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 39070080 sectors (20003 MB) w/1768KiB Cache, CHS=38760/16/63, UDMA(33)
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 > p3 p4
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: TOSHIBA Model: DVD-ROM SD-C2502 Rev: 1011
Type: CD-ROM ANSI SCSI revision: 02
sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 5
ohci1394: $Rev: 1045 $ Ben Collins <[email protected]>ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[5] MMIO=[ec002000-ec0027ff] Max Packet=[2048] drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1 drivers/usb/core/usb.c: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver...drivers/usb/core/usb.c: registered new driver usb-storage
USB Mass Storage support registered.drivers/usb/core/usb.c: registered new driver hiddev drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver drivers/usb/core/usb.c: registered new driver usbscanner drivers/usb/image/scanner.c: 0.4.15:USB Scanner Driver
mice: PS/2 mouse device common for all mice
input: PS/2 Generic Mouse on isa0060/serio1
serio: i8042 AUX port at 0x60,0x64 irq 12
input: AT Translated Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
I2O Core - (C) Copyright 1999 Red Hat Software
I2O: Event thread created as pid 15
i2o: Checking for PCI I2O controllers...
I2O configuration manager v 0.04.
(C) Copyright 1999 Red Hat Software
I2O Block Storage OSM v0.9
(c) Copyright 1999-2001 Red Hat Software.i2o_block: Checking for Boot device...i2o_block: Checking for I2O Block devices...
i2c /dev entries driver
Advanced Linux Sound Architecture Driver Version 0.9.7 (Thu Sep 25 19:16:36 2003 UTC).request_module: failed /sbin/modprobe -- snd-card-0. error = -16
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f261c0045e8] intel8x0_measure_ac97_clock: measured 49345 usecs
intel8x0: clocking to 48000
ALSA device list:
#0: SiS SI7012 at 0x8800, irq 5
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)ip_tables: (C) 2000-2002 Netfilter core team
NET: Registered protocol family 1
NET: Registered protocol family 17
PM: Reading pmdisk image.
PM: Resume from disk failed.
ACPI: (supports S0 S3 S4 S5)
RAMDISK: Couldn't find valid RAM disk image starting at 0.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 188k freed
Adding 257032k swap on /dev/hda3. Priority:-1 extents:1
EXT3 FS on hda4, internal journal
IA-32 Microcode Update Driver: v1.13 <[email protected]>
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT1] (battery absent)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Processor [CPU0] (supports C1 C2 C3, 8 throttling states)
[drm] Initialized sis 1.1.0 20030826 on minor 0
sisfb: Video ROM found and mapped to 020c0000
sisfb: Framebuffer at 0xf0000000, mapped to 0x20907000, size 32768k
sisfb: MMIO at 0xec100000, mapped to 0x20892000, size 128k
sisfb: Memory heap starting at 31744K
sisfb: Using MMIO queue mode
sisfb: Detected SiS302LV video bridge
sisfb: Detected LCD PanelDelayCompensation 1
sisfb: Default mode is 800x600x8 (60Hz)
sisfb: Initial vbflags 0x8000012
sisfb: Added MTRRs
sisfb: Installed SISFB_GET_INFO ioctl (80046ef8)
sisfb: Installed SISFB_GET_VBRSTATUS ioctl (80046ef9)
sisfb: 2D acceleration is enabled, scrolling mode ypan
fb0: SIS 65x/M65x/66xFX/M66xFX/74x VGA frame buffer device, Version 1.6.21
sisfb: (C) 2001-2003 Thomas Winischhofer. All rights reserved.
NTFS driver 2.1.4 [Flags: R/O MODULE].
NTFS volume version 3.1.
eth0: link down
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
Intel PCIC probe: not found.
Yenta: CardBus bridge found at 0000:00:09.0 [1025:001a]
Yenta: ISA IRQ list 0000, PCI irq10
Socket status: 30000006
Yenta: CardBus bridge found at 0000:00:09.1 [1025:001a]
Yenta: ISA IRQ list 0098, PCI irq10
Socket status: 30000006
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x200-0x20f 0x3c0-0x3df 0x480-0x48f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
Unable to handle kernel paging request at virtual address 00002000 printing eip: 000067ae *pde = 00000000 Oops: 0004 [#1] PREEMPT CPU: 0 EIP: c000:[<000067ae>] Not tainted VLI EFLAGS: 00033246
EIP is at 0x67ae
eax: 00004f00 ebx: 00000000 ecx: 00000000 edx: 00000000
esi: 00000000 edi: 00002000 ebp: 00000fd6 esp: 1fe6df24
ds: 0000 es: 0000 ss: 0068
Process XFree86 (pid: 351, threadinfo=1fe6c000 task=037006b0)
Stack: 00000fd0 00000100 00000000 00000000 00000000 00000000 00000000 00000000
00000005 ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
Call Trace:
Code: Bad EIP value.
<1>Unable to handle kernel paging request at virtual address 00002000
printing eip:
000067ae
*pde = 00000000
Oops: 0004 [#2]
PREEMPT
CPU: 0
EIP: c000:[<000067ae>] Not tainted VLI
EFLAGS: 00033246EIP is at 0x67ae
eax: 00004f00 ebx: 00000000 ecx: 00000000 edx: 00000000
esi: 00000000 edi: 00002000 ebp: 00000fd6 esp: 1e381f24
ds: 0000 es: 0000 ss: 0068
Process XFree86 (pid: 383, threadinfo=1e380000 task=1e383940)
Stack: 00000fd0 00000100 00000000 00000000 00000000 00000000 00000000 00000000
00000005 ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
Call Trace:
Code: Bad EIP value.
<1>Unable to handle kernel paging request at virtual address 00002000
printing eip:
000067ae
*pde = 00000000
Oops: 0004 [#3]
PREEMPT
CPU: 0
EIP: c000:[<000067ae>] Not tainted VLI
EFLAGS: 00033246EIP is at 0x67ae
eax: 00004f00 ebx: 00000000 ecx: 00000000 edx: 00000000
esi: 00000000 edi: 00002000 ebp: 00000fd6 esp: 1fe6df24
ds: 0000 es: 0000 ss: 0068
Process XFree86 (pid: 388, threadinfo=1fe6c000 task=037006b0)
Stack: 00000fd0 00000100 00000000 00000000 00000000 00000000 00000000 00000000
00000005 ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
Call Trace:
Code: Bad EIP value.
<1>Unable to handle kernel paging request at virtual address 00002000
printing eip:
000067ae
*pde = 00000000
Oops: 0004 [#4]
PREEMPT
CPU: 0
EIP: c000:[<000067ae>] Not tainted VLI
EFLAGS: 00033246EIP is at 0x67ae
eax: 00004f00 ebx: 00000000 ecx: 00000000 edx: 00000000
esi: 00000000 edi: 00002000 ebp: 00000fd6 esp: 1e3d1f24
ds: 0000 es: 0000 ss: 0068
Process XFree86 (pid: 393, threadinfo=1e3d0000 task=1e960080)
Stack: 00000fd0 00000100 00000000 00000000 00000000 00000000 00000000 00000000
00000005 ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
Call Trace:
Code: Bad EIP value.Oct 21 10:36:58 D998 kernel: RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Oct 21 10:36:58 D998 kernel: loop: loaded (max 8 devices) Oct 21 10:36:58 D998 kernel: PPP generic driver version 2.4.2 Oct 21 10:36:58 D998 kernel: PPP Deflate Compression module registered Oct 21 10:36:58 D998 kernel: PPP BSD Compression module registered Oct 21 10:36:58 D998 kernel: 8139too Fast Ethernet driver 0.9.26 Oct 21 10:36:58 D998 kernel: eth0: RealTek RTL8139 at 0x2082d800, 00:02:3f:ac:dc:96, IRQ 10 Oct 21 10:36:58 D998 kernel: eth0: Identified 8139 chip type 'RTL-8100B/8139D' Oct 21 10:36:58 D998 kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 Oct 21 10:36:58 D998 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Oct 21 10:36:58 D998 kernel: SIS5513: IDE controller at PCI slot 0000:00:02.5 Oct 21 10:36:58 D998 kernel: SIS5513: chipset revision 208 Oct 21 10:36:58 D998 kernel: SIS5513: not 100%% native mode: will probe irqs later Oct 21 10:36:58 D998 kernel: SIS5513: SiS 961 MuTIOL IDE UDMA100 controller Oct 21 10:36:58 D998 kernel: ide0: BM-DMA at 0x9480-0x9487, BIOS settings: hda:DMA, hdb:pio Oct 21 10:36:58 D998 kernel: ide1: BM-DMA at 0x9488-0x948f, BIOS settings: hdc:DMA, hdd:pio Oct 21 10:36:58 D998 kernel: hda: IC25N020ATCS04-0, ATA DISK drive Oct 21 10:36:58 D998 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Oct 21 10:36:58 D998 kernel: hdc: TOSHIBA DVD-ROM SD-C2502, ATAPI CD/DVD-ROM drive Oct 21 10:36:58 D998 kernel: ide1 at 0x170-0x177,0x376 on irq 15 Oct 21 10:36:58 D998 kernel: hda: max request size: 128KiB Oct 21 10:36:58 D998 kernel: hda: 39070080 sectors (20003 MB) w/1768KiB Cache, CHS=38760/16/63, UDMA(33) Oct 21 10:36:58 D998 kernel: /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 > p3 p4 Oct 21 10:36:58 D998 kernel: scsi0 : SCSI host adapter emulation for IDE ATAPI devices Oct 21 10:36:58 D998 kernel: Vendor: TOSHIBA Model: DVD-ROM SD-C2502 Rev: 1011 Oct 21 10:36:58 D998 kernel: Type: CD-ROM ANSI SCSI revision: 02 Oct 21 10:36:58 D998 kernel: sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray Oct 21 10:36:58 D998 kernel: Uniform CD-ROM driver Revision: 3.12 Oct 21 10:36:58 D998 kernel: Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 Oct 21 10:36:58 D998 kernel: Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 5 Oct 21 10:36:58 D998 kernel: ohci1394: $Rev: 1045 $ Ben Collins <[email protected]> Oct 21 10:36:58 D998 kernel: ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[5] MMIO=[ec002000-ec0027ff] Max Packet=[2048] Oct 21 10:36:58 D998 kernel: drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1 Oct 21 10:36:58 D998 kernel: drivers/usb/core/usb.c: registered new driver usblp Oct 21 10:36:58 D998 kernel: drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Oct 21 10:36:58 D998 kernel: Initializing USB Mass Storage driver... Oct 21 10:36:58 D998 kernel: drivers/usb/core/usb.c: registered new driver usb-storage Oct 21 10:36:58 D998 kernel: USB Mass Storage support registered. Oct 21 10:36:58 D998 kernel: drivers/usb/core/usb.c: registered new driver hiddev Oct 21 10:36:58 D998 kernel: drivers/usb/core/usb.c: registered new driver hid Oct 21 10:36:58 D998 kernel: drivers/usb/input/hid-core.c: v2.0:USB HID core driver Oct 21 10:36:58 D998 kernel: drivers/usb/core/usb.c: registered new driver usbscanner Oct 21 10:36:58 D998 kernel: drivers/usb/image/scanner.c: 0.4.15:USB Scanner Driver Oct 21 10:36:58 D998 kernel: mice: PS/2 mouse device common for all mice Oct 21 10:36:58 D998 kernel: input: PS/2 Generic Mouse on isa0060/serio1 Oct 21 10:36:58 D998 kernel: serio: i8042 AUX port at 0x60,0x64 irq 12 Oct 21 10:36:58 D998 kernel: input: AT Translated Set 2 keyboard on isa0060/serio0 Oct 21 10:36:58 D998 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1 Oct 21 10:36:58 D998 kernel: I2O Core - (C) Copyright 1999 Red Hat Software Oct 21 10:36:58 D998 kernel: I2O: Event thread created as pid 15 Oct 21 10:36:58 D998 kernel: i2o: Checking for PCI I2O controllers... Oct 21 10:36:58 D998 kernel: I2O configuration manager v 0.04. Oct 21 10:36:58 D998 kernel: (C) Copyright 1999 Red Hat Software Oct 21 10:36:58 D998 kernel: I2O Block Storage OSM v0.9 Oct 21 10:36:58 D998 kernel: (c) Copyright 1999-2001 Red Hat Software. Oct 21 10:36:58 D998 kernel: i2o_block: Checking for Boot device... Oct 21 10:36:58 D998 kernel: i2o_block: Checking for I2O Block devices... Oct 21 10:36:58 D998 kernel: i2c /dev entries driver Oct 21 10:36:58 D998 kernel: Advanced Linux Sound Architecture Driver Version 0.9.7 (Thu Sep 25 19:16:36 2003 UTC). Oct 21 10:36:58 D998 kernel: request_module: failed /sbin/modprobe -- snd-card-0. error = -16 Oct 21 10:36:58 D998 kernel: ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f261c0045e8] Oct 21 10:36:58 D998 kernel: intel8x0_measure_ac97_clock: measured 49345 usecs Oct 21 10:36:58 D998 kernel: intel8x0: clocking to 48000 Oct 21 10:36:58 D998 kernel: ALSA device list: Oct 21 10:36:58 D998 kernel: #0: SiS SI7012 at 0x8800, irq 5 Oct 21 10:36:58 D998 kernel: NET: Registered protocol family 2 Oct 21 10:36:58 D998 kernel: IP: routing cache hash table of 4096 buckets, 32Kbytes Oct 21 10:36:58 D998 kernel: TCP: Hash tables configured (established 32768 bind 65536) Oct 21 10:36:58 D998 kernel: ip_tables: (C) 2000-2002 Netfilter core team Oct 21 10:36:58 D998 kernel: NET: Registered protocol family 1 Oct 21 10:36:58 D998 kernel: NET: Registered protocol family 17 Oct 21 10:36:58 D998 kernel: PM: Reading pmdisk image. Oct 21 10:36:58 D998 kernel: PM: Resume from disk failed. Oct 21 10:36:58 D998 kernel: ACPI: (supports S0 S3 S4 S5) Oct 21 10:36:58 D998 kernel: RAMDISK: Couldn't find valid RAM disk image starting at 0. Oct 21 10:36:58 D998 kernel: kjournald starting. Commit interval 5 seconds Oct 21 10:36:58 D998 kernel: EXT3-fs: mounted filesystem with ordered data mode. Oct 21 10:36:58 D998 kernel: VFS: Mounted root (ext3 filesystem) readonly. Oct 21 10:36:58 D998 kernel: Mounted devfs on /dev Oct 21 10:36:58 D998 kernel: Freeing unused kernel memory: 188k freed Oct 21 10:36:58 D998 kernel: Adding 257032k swap on /dev/hda3. Priority:-1 extents:1 Oct 21 10:36:58 D998 kernel: EXT3 FS on hda4, internal journal Oct 21 10:36:58 D998 kernel: IA-32 Microcode Update Driver: v1.13 <[email protected]> Oct 21 10:36:58 D998 kernel: ACPI: AC Adapter [ACAD] (on-line) Oct 21 10:36:58 D998 kernel: ACPI: Battery Slot [BAT1] (battery absent) Oct 21 10:36:58 D998 kernel: ACPI: Power Button (FF) [PWRF] Oct 21 10:36:58 D998 kernel: ACPI: Lid Switch [LID] Oct 21 10:36:58 D998 kernel: ACPI: Processor [CPU0] (supports C1 C2 C3, 8 throttling states) Oct 21 10:36:58 D998 kernel: [drm] Initialized sis 1.1.0 20030826 on minor 0 Oct 21 10:36:58 D998 kernel: sisfb: Video ROM found and mapped to 020c0000 Oct 21 10:36:58 D998 kernel: sisfb: Framebuffer at 0xf0000000, mapped to 0x20907000, size 32768k Oct 21 10:36:58 D998 kernel: sisfb: MMIO at 0xec100000, mapped to 0x20892000, size 128k Oct 21 10:36:58 D998 kernel: sisfb: Memory heap starting at 31744K Oct 21 10:36:58 D998 kernel: sisfb: Using MMIO queue mode Oct 21 10:36:58 D998 kernel: sisfb: Detected SiS302LV video bridge Oct 21 10:36:58 D998 kernel: sisfb: Detected LCD PanelDelayCompensation 1 Oct 21 10:36:58 D998 kernel: sisfb: Default mode is 800x600x8 (60Hz) Oct 21 10:36:58 D998 kernel: sisfb: Initial vbflags 0x8000012 Oct 21 10:36:58 D998 kernel: sisfb: Added MTRRs Oct 21 10:36:58 D998 kernel: sisfb: Installed SISFB_GET_INFO ioctl (80046ef8) Oct 21 10:36:58 D998 kernel: sisfb: Installed SISFB_GET_VBRSTATUS ioctl (80046ef9) Oct 21 10:36:58 D998 kernel: sisfb: 2D acceleration is enabled, scrolling mode ypan Oct 21 10:36:58 D998 kernel: fb0: SIS 65x/M65x/66xFX/M66xFX/74x VGA frame buffer device, Version 1.6.21 Oct 21 10:36:58 D998 kernel: sisfb: (C) 2001-2003 Thomas Winischhofer. All rights reserved. Oct 21 10:36:58 D998 kernel: NTFS driver 2.1.4 [Flags: R/O MODULE]. Oct 21 10:36:58 D998 kernel: NTFS volume version 3.1. Oct 21 10:36:58 D998 kernel: eth0: link down Oct 21 10:37:03 D998 kernel: Linux Kernel Card Services Oct 21 10:37:03 D998 kernel: options: [pci] [cardbus] [pm] Oct 21 10:37:03 D998 kernel: Intel PCIC probe: not found. Oct 21 10:37:03 D998 kernel: Yenta: CardBus bridge found at 0000:00:09.0 [1025:001a] Oct 21 10:37:03 D998 kernel: Yenta: ISA IRQ list 0000, PCI irq10 Oct 21 10:37:03 D998 kernel: Socket status: 30000006 Oct 21 10:37:03 D998 kernel: Yenta: CardBus bridge found at 0000:00:09.1 [1025:001a] Oct 21 10:37:03 D998 kernel: Yenta: ISA IRQ list 0098, PCI irq10 Oct 21 10:37:03 D998 kernel: Socket status: 30000006 Oct 21 10:37:04 D998 kernel: cs: IO port probe 0x0c00-0x0cff: clean. Oct 21 10:37:04 D998 kernel: cs: IO port probe 0x0800-0x08ff: clean. Oct 21 10:37:04 D998 kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x200-0x20f 0x3c0-0x3df 0x480-0x48f 0x4d0-0x4d7 Oct 21 10:37:04 D998 kernel: cs: IO port probe 0x0a00-0x0aff: clean. Oct 21 10:37:10 D998 kernel: Unable to handle kernel paging request at virtual address 00002000 Oct 21 10:37:10 D998 kernel: printing eip: Oct 21 10:37:10 D998 kernel: 000067ae Oct 21 10:37:10 D998 kernel: *pde = 00000000 Oct 21 10:37:10 D998 kernel: Oops: 0004 [#1] Oct 21 10:37:10 D998 kernel: PREEMPT Oct 21 10:37:10 D998 kernel: CPU: 0 Oct 21 10:37:10 D998 kernel: EIP: c000:[<000067ae>] Not tainted VLI Oct 21 10:37:10 D998 kernel: EFLAGS: 00033246 Oct 21 10:37:10 D998 kernel: EIP is at 0x67ae Oct 21 10:37:10 D998 kernel: eax: 00004f00 ebx: 00000000 ecx: 00000000 edx: 00000000 Oct 21 10:37:10 D998 kernel: esi: 00000000 edi: 00002000 ebp: 00000fd6 esp: 1fe6df24 Oct 21 10:37:10 D998 kernel: ds: 0000 es: 0000 ss: 0068 Oct 21 10:37:10 D998 kernel: Process XFree86 (pid: 351, threadinfo=1fe6c000 task=037006b0) Oct 21 10:37:10 D998 kernel: Stack: 00000fd0 00000100 00000000 00000000 00000000 00000000 00000000 00000000 Oct 21 10:37:10 D998 kernel: 00000005 ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff Oct 21 10:37:10 D998 kernel: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff Oct 21 10:37:10 D998 kernel: Call Trace: Oct 21 10:37:10 D998 kernel: Oct 21 10:37:10 D998 kernel: Code: Bad EIP value. Oct 21 10:37:11 D998 kernel: <1>Unable to handle kernel paging request at virtual address 00002000 Oct 21 10:37:11 D998 kernel: printing eip: Oct 21 10:37:11 D998 kernel: 000067ae Oct 21 10:37:11 D998 kernel: *pde = 00000000 Oct 21 10:37:11 D998 kernel: Oops: 0004 [#2] Oct 21 10:37:11 D998 kernel: PREEMPT Oct 21 10:37:11 D998 kernel: CPU: 0 Oct 21 10:37:11 D998 kernel: EIP: c000:[<000067ae>] Not tainted VLI Oct 21 10:37:11 D998 kernel: EFLAGS: 00033246 Oct 21 10:37:11 D998 kernel: EIP is at 0x67ae Oct 21 10:37:11 D998 kernel: eax: 00004f00 ebx: 00000000 ecx: 00000000 edx: 00000000 Oct 21 10:37:11 D998 kernel: esi: 00000000 edi: 00002000 ebp: 00000fd6 esp: 1e381f24 Oct 21 10:37:11 D998 kernel: ds: 0000 es: 0000 ss: 0068 Oct 21 10:37:11 D998 kernel: Process XFree86 (pid: 383, threadinfo=1e380000 task=1e383940) Oct 21 10:37:11 D998 kernel: Stack: 00000fd0 00000100 00000000 00000000 00000000 00000000 00000000 00000000 Oct 21 10:37:11 D998 kernel: 00000005 ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff Oct 21 10:37:11 D998 kernel: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff Oct 21 10:37:11 D998 kernel: Call Trace: Oct 21 10:37:11 D998 kernel: Oct 21 10:37:11 D998 kernel: Code: Bad EIP value. Oct 21 10:37:13 D998 kernel: <1>Unable to handle kernel paging request at virtual address 00002000 Oct 21 10:37:13 D998 kernel: printing eip: Oct 21 10:37:13 D998 kernel: 000067ae Oct 21 10:37:13 D998 kernel: *pde = 00000000 Oct 21 10:37:13 D998 kernel: Oops: 0004 [#3] Oct 21 10:37:13 D998 kernel: PREEMPT Oct 21 10:37:13 D998 kernel: CPU: 0 Oct 21 10:37:13 D998 kernel: EIP: c000:[<000067ae>] Not tainted VLI Oct 21 10:37:13 D998 kernel: EFLAGS: 00033246 Oct 21 10:37:13 D998 kernel: EIP is at 0x67ae Oct 21 10:37:13 D998 kernel: eax: 00004f00 ebx: 00000000 ecx: 00000000 edx: 00000000 Oct 21 10:37:13 D998 kernel: esi: 00000000 edi: 00002000 ebp: 00000fd6 esp: 1fe6df24 Oct 21 10:37:13 D998 kernel: ds: 0000 es: 0000 ss: 0068 Oct 21 10:37:13 D998 kernel: Process XFree86 (pid: 388, threadinfo=1fe6c000 task=037006b0) Oct 21 10:37:13 D998 kernel: Stack: 00000fd0 00000100 00000000 00000000 00000000 00000000 00000000 00000000 Oct 21 10:37:13 D998 kernel: 00000005 ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff Oct 21 10:37:13 D998 kernel: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff Oct 21 10:37:13 D998 kernel: Call Trace: Oct 21 10:37:13 D998 kernel: Oct 21 10:37:13 D998 kernel: Code: Bad EIP value. Oct 21 10:37:15 D998 kernel: <1>Unable to handle kernel paging request at virtual address 00002000 Oct 21 10:37:15 D998 kernel: printing eip: Oct 21 10:37:15 D998 kernel: 000067ae Oct 21 10:37:15 D998 kernel: *pde = 00000000 Oct 21 10:37:15 D998 kernel: Oops: 0004 [#4] Oct 21 10:37:15 D998 kernel: PREEMPT Oct 21 10:37:15 D998 kernel: CPU: 0 Oct 21 10:37:15 D998 kernel: EIP: c000:[<000067ae>] Not tainted VLI Oct 21 10:37:15 D998 kernel: EFLAGS: 00033246 Oct 21 10:37:15 D998 kernel: EIP is at 0x67ae Oct 21 10:37:15 D998 kernel: eax: 00004f00 ebx: 00000000 ecx: 00000000 edx: 00000000 Oct 21 10:37:15 D998 kernel: esi: 00000000 edi: 00002000 ebp: 00000fd6 esp: 1e3d1f24 Oct 21 10:37:15 D998 kernel: ds: 0000 es: 0000 ss: 0068 Oct 21 10:37:15 D998 kernel: Process XFree86 (pid: 393, threadinfo=1e3d0000 task=1e960080) Oct 21 10:37:15 D998 kernel: Stack: 00000fd0 00000100 00000000 00000000 00000000 00000000 00000000 00000000 Oct 21 10:37:15 D998 kernel: 00000005 ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff Oct 21 10:37:15 D998 kernel: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff Oct 21 10:37:15 D998 kernel: Call Trace: Oct 21 10:37:15 D998 kernel: Oct 21 10:37:15 D998 kernel: Code: Bad EIP value.
#
# Automatically generated make config: don't edit
#CONFIG_X86=yCONFIG_MMU=yCONFIG_UID16=yCONFIG_GENERIC_ISA_DMA=y
#
# Code maturity level options
#CONFIG_EXPERIMENTAL=yCONFIG_CLEAN_COMPILE=y
# CONFIG_STANDALONE is not setCONFIG_BROKEN_ON_SMP=y
#
# General setup
#CONFIG_SWAP=yCONFIG_SYSVIPC=yCONFIG_BSD_PROCESS_ACCT=yCONFIG_SYSCTL=yCONFIG_LOG_BUF_SHIFT=14CONFIG_IKCONFIG=yCONFIG_IKCONFIG_PROC=y
# CONFIG_EMBEDDED is not setCONFIG_KALLSYMS=yCONFIG_FUTEX=yCONFIG_EPOLL=yCONFIG_IOSCHED_NOOP=yCONFIG_IOSCHED_AS=yCONFIG_IOSCHED_DEADLINE=yCONFIG_IOSCHED_CFQ=y
#
# Loadable module support
#CONFIG_MODULES=yCONFIG_MODULE_UNLOAD=yCONFIG_MODULE_FORCE_UNLOAD=yCONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not setCONFIG_KMOD=y
#
# Processor type and features
#CONFIG_X86_PC=y
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not setCONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not setCONFIG_X86_CMPXCHG=yCONFIG_X86_XADD=yCONFIG_X86_L1_CACHE_SHIFT=7CONFIG_RWSEM_XCHGADD_ALGORITHM=yCONFIG_X86_WP_WORKS_OK=yCONFIG_X86_INVLPG=yCONFIG_X86_BSWAP=yCONFIG_X86_POPAD_OK=yCONFIG_X86_GOOD_APIC=yCONFIG_X86_INTEL_USERCOPY=yCONFIG_X86_USE_PPRO_CHECKSUM=yCONFIG_X86_4G=yCONFIG_X86_SWITCH_PAGETABLES=yCONFIG_X86_4G_VM_LAYOUT=yCONFIG_X86_UACCESS_INDIRECT=yCONFIG_X86_HIGH_ENTRY=y
# CONFIG_HPET_TIMER is not set
# CONFIG_HPET_EMULATE_RTC is not set
# CONFIG_SMP is not setCONFIG_PREEMPT=yCONFIG_X86_UP_APIC=yCONFIG_X86_UP_IOAPIC=yCONFIG_X86_LOCAL_APIC=yCONFIG_X86_IO_APIC=yCONFIG_X86_TSC=yCONFIG_X86_MCE=yCONFIG_X86_MCE_NONFATAL=yCONFIG_X86_MCE_P4THERMAL=yCONFIG_TOSHIBA=mCONFIG_I8K=mCONFIG_MICROCODE=mCONFIG_X86_MSR=mCONFIG_X86_CPUID=mCONFIG_EDD=mCONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not setCONFIG_MTRR=yCONFIG_HAVE_DEC_LOCK=yCONFIG_BOOT_IOREMAP=y
#
# Power management options (ACPI, APM)
#CONFIG_PM=yCONFIG_SOFTWARE_SUSPEND=yCONFIG_PM_DISK=yCONFIG_PM_DISK_PARTITION=""
#
# ACPI (Advanced Configuration and Power Interface) Support #CONFIG_ACPI=yCONFIG_ACPI_BOOT=yCONFIG_ACPI_INTERPRETER=yCONFIG_ACPI_SLEEP=yCONFIG_ACPI_SLEEP_PROC_FS=yCONFIG_ACPI_AC=mCONFIG_ACPI_BATTERY=mCONFIG_ACPI_BUTTON=mCONFIG_ACPI_FAN=mCONFIG_ACPI_PROCESSOR=mCONFIG_ACPI_THERMAL=mCONFIG_ACPI_ASUS=mCONFIG_ACPI_TOSHIBA=m
# CONFIG_ACPI_DEBUG is not setCONFIG_ACPI_BUS=yCONFIG_ACPI_EC=yCONFIG_ACPI_POWER=yCONFIG_ACPI_PCI=yCONFIG_ACPI_SYSTEM=y
# CONFIG_ACPI_EFI is not set
# CONFIG_ACPI_RELAXED_AML is not set
#
# APM (Advanced Power Management) BIOS Support
#CONFIG_APM=m
# CONFIG_APM_IGNORE_USER_SUSPEND is not setCONFIG_APM_DO_ENABLE=yCONFIG_APM_CPU_IDLE=y
# CONFIG_APM_DISPLAY_BLANK is not set
# CONFIG_APM_RTC_IS_GMT is not set
# CONFIG_APM_ALLOW_INTS is not set
# CONFIG_APM_REAL_MODE_POWER_OFF is not set
#
# CPU Frequency scaling
#CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_PROC_INTF=m CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=m CONFIG_CPU_FREQ_GOV_USERSPACE=m CONFIG_CPU_FREQ_24_API=y CONFIG_CPU_FREQ_TABLE=y
#
# CPUFreq processor drivers
#CONFIG_X86_ACPI_CPUFREQ=m
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not setCONFIG_X86_SPEEDSTEP_CENTRINO=mCONFIG_X86_SPEEDSTEP_ICH=mCONFIG_X86_SPEEDSTEP_SMI=mCONFIG_X86_SPEEDSTEP_LIB=mCONFIG_X86_P4_CLOCKMOD=m
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not setCONFIG_PCI_GOANY=yCONFIG_PCI_BIOS=yCONFIG_PCI_DIRECT=y
# CONFIG_PCI_USE_VECTOR is not setCONFIG_PCI_LEGACY_PROC=yCONFIG_PCI_NAMES=yCONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not setCONFIG_HOTPLUG=y
#
# PCMCIA/CardBus support
#CONFIG_PCMCIA=mCONFIG_YENTA=mCONFIG_CARDBUS=yCONFIG_I82092=mCONFIG_I82365=mCONFIG_TCIC=mCONFIG_PCMCIA_PROBE=y
#
# PCI Hotplug Support
#CONFIG_HOTPLUG_PCI=mCONFIG_HOTPLUG_PCI_FAKE=mCONFIG_HOTPLUG_PCI_COMPAQ=mCONFIG_HOTPLUG_PCI_COMPAQ_NVRAM=yCONFIG_HOTPLUG_PCI_IBM=mCONFIG_HOTPLUG_PCI_ACPI=m
# CONFIG_HOTPLUG_PCI_CPCI is not set
#
# Executable file formats
#CONFIG_BINFMT_ELF=yCONFIG_BINFMT_AOUT=yCONFIG_BINFMT_MISC=y
#
# Device Drivers
#
#
# Generic Driver Options
#
# CONFIG_FW_LOADER is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#CONFIG_PARPORT=yCONFIG_PARPORT_PC=yCONFIG_PARPORT_PC_CML1=y
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not setCONFIG_PARPORT_PC_PCMCIA=mCONFIG_PARPORT_OTHER=yCONFIG_PARPORT_1284=y
#
# Plug and Play support
#CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
# CONFIG_ISAPNP is not setCONFIG_PNPBIOS=y
#
# Block devices
#CONFIG_BLK_DEV_FD=yCONFIG_BLK_DEV_XD=mCONFIG_PARIDE=mCONFIG_PARIDE_PARPORT=y
#
# Parallel IDE high-level drivers
#CONFIG_PARIDE_PD=mCONFIG_PARIDE_PCD=mCONFIG_PARIDE_PF=mCONFIG_PARIDE_PT=mCONFIG_PARIDE_PG=m
#
# Parallel IDE protocol modules
#CONFIG_PARIDE_ATEN=mCONFIG_PARIDE_BPCK=mCONFIG_PARIDE_BPCK6=mCONFIG_PARIDE_COMM=mCONFIG_PARIDE_DSTR=mCONFIG_PARIDE_FIT2=mCONFIG_PARIDE_FIT3=mCONFIG_PARIDE_EPAT=m
# CONFIG_PARIDE_EPATC8 is not setCONFIG_PARIDE_EPIA=mCONFIG_PARIDE_FRIQ=mCONFIG_PARIDE_FRPW=mCONFIG_PARIDE_KBIC=mCONFIG_PARIDE_KTTI=mCONFIG_PARIDE_ON20=mCONFIG_PARIDE_ON26=mCONFIG_BLK_CPQ_DA=mCONFIG_BLK_CPQ_CISS_DA=m
# CONFIG_CISS_SCSI_TAPE is not setCONFIG_BLK_DEV_DAC960=mCONFIG_BLK_DEV_UMEM=mCONFIG_BLK_DEV_LOOP=yCONFIG_BLK_DEV_CRYPTOLOOP=mCONFIG_BLK_DEV_NBD=mCONFIG_BLK_DEV_RAM=yCONFIG_BLK_DEV_RAM_SIZE=4096CONFIG_BLK_DEV_INITRD=yCONFIG_LBD=y
#
# ATA/ATAPI/MFM/RLL support
#CONFIG_IDE=yCONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives #
# CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=yCONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_IDEDISK_STROKE is not set CONFIG_BLK_DEV_IDECS=mCONFIG_BLK_DEV_IDECD=mCONFIG_BLK_DEV_IDETAPE=mCONFIG_BLK_DEV_IDEFLOPPY=mCONFIG_BLK_DEV_IDESCSI=yCONFIG_IDE_TASK_IOCTL=yCONFIG_IDE_TASKFILE_IO=y
#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_CMD640 is not setCONFIG_BLK_DEV_IDEPNP=yCONFIG_BLK_DEV_IDEPCI=yCONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not setCONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not setCONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDE_TCQ is not set
# CONFIG_BLK_DEV_IDEDMA_FORCED is not setCONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_IDEDMA_PCI_WIP is not setCONFIG_BLK_DEV_ADMA=yCONFIG_BLK_DEV_AEC62XX=mCONFIG_BLK_DEV_ALI15X3=m
# CONFIG_WDC_ALI15X3 is not setCONFIG_BLK_DEV_AMD74XX=mCONFIG_BLK_DEV_CMD64X=mCONFIG_BLK_DEV_TRIFLEX=mCONFIG_BLK_DEV_CY82C693=mCONFIG_BLK_DEV_CS5520=mCONFIG_BLK_DEV_CS5530=mCONFIG_BLK_DEV_HPT34X=mCONFIG_BLK_DEV_HPT366=mCONFIG_BLK_DEV_SC1200=mCONFIG_BLK_DEV_PIIX=mCONFIG_BLK_DEV_NS87415=mCONFIG_BLK_DEV_PDC202XX_OLD=mCONFIG_BLK_DEV_PDC202XX_NEW=mCONFIG_BLK_DEV_SVWKS=mCONFIG_BLK_DEV_SGIIOC4=mCONFIG_BLK_DEV_SIIMAGE=mCONFIG_BLK_DEV_SIS5513=yCONFIG_BLK_DEV_SLC90E66=mCONFIG_BLK_DEV_TRM290=mCONFIG_BLK_DEV_VIA82CXXX=m
# CONFIG_IDE_CHIPSETS is not setCONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not setCONFIG_IDEDMA_AUTO=y
# CONFIG_DMA_NONPCI is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#CONFIG_SCSI=yCONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=yCONFIG_MAX_SD_DISKS=256CONFIG_CHR_DEV_ST=m
# CONFIG_CHR_DEV_OSST is not setCONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not setCONFIG_CHR_DEV_SG=y
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs #
# CONFIG_SCSI_MULTI_LUN is not set CONFIG_SCSI_REPORT_LUNS=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# PCMCIA SCSI adapter support
#CONFIG_PCMCIA_AHA152X=mCONFIG_PCMCIA_FDOMAIN=mCONFIG_PCMCIA_NINJA_SCSI=mCONFIG_PCMCIA_QLOGIC=m
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#CONFIG_IEEE1394=y
#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_IEEE1394_OUI_DB is not set
#
# Device Drivers
#
# CONFIG_IEEE1394_PCILYNX is not setCONFIG_IEEE1394_OHCI1394=y
#
# Protocol Drivers
#CONFIG_IEEE1394_VIDEO1394=mCONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not setCONFIG_IEEE1394_ETH1394=mCONFIG_IEEE1394_DV1394=mCONFIG_IEEE1394_RAWIO=mCONFIG_IEEE1394_CMP=mCONFIG_IEEE1394_AMDTP=m
#
# I2O device support
#CONFIG_I2O=yCONFIG_I2O_PCI=yCONFIG_I2O_BLOCK=yCONFIG_I2O_SCSI=mCONFIG_I2O_PROC=y
#
# Networking support
#CONFIG_NET=y
#
# Networking options
#CONFIG_PACKET=yCONFIG_PACKET_MMAP=yCONFIG_NETLINK_DEV=mCONFIG_UNIX=yCONFIG_NET_KEY=mCONFIG_INET=yCONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not setCONFIG_NET_IPIP=mCONFIG_NET_IPGRE=m
# CONFIG_NET_IPGRE_BROADCAST is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not setCONFIG_INET_ECN=yCONFIG_SYN_COOKIES=yCONFIG_INET_AH=mCONFIG_INET_ESP=mCONFIG_INET_IPCOMP=m
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not setCONFIG_DECNET=m
# CONFIG_DECNET_SIOCGIFCONF is not set
# CONFIG_DECNET_ROUTER is not setCONFIG_BRIDGE=mCONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not setCONFIG_BRIDGE_NETFILTER=y
#
# IP: Netfilter Configuration
#CONFIG_IP_NF_CONNTRACK=mCONFIG_IP_NF_FTP=mCONFIG_IP_NF_IRC=mCONFIG_IP_NF_TFTP=mCONFIG_IP_NF_AMANDA=mCONFIG_IP_NF_QUEUE=mCONFIG_IP_NF_IPTABLES=yCONFIG_IP_NF_MATCH_LIMIT=mCONFIG_IP_NF_MATCH_IPRANGE=mCONFIG_IP_NF_MATCH_MAC=mCONFIG_IP_NF_MATCH_PKTTYPE=mCONFIG_IP_NF_MATCH_MARK=mCONFIG_IP_NF_MATCH_MULTIPORT=mCONFIG_IP_NF_MATCH_TOS=mCONFIG_IP_NF_MATCH_RECENT=mCONFIG_IP_NF_MATCH_ECN=mCONFIG_IP_NF_MATCH_DSCP=mCONFIG_IP_NF_MATCH_AH_ESP=mCONFIG_IP_NF_MATCH_LENGTH=mCONFIG_IP_NF_MATCH_TTL=mCONFIG_IP_NF_MATCH_TCPMSS=mCONFIG_IP_NF_MATCH_HELPER=mCONFIG_IP_NF_MATCH_STATE=mCONFIG_IP_NF_MATCH_CONNTRACK=mCONFIG_IP_NF_MATCH_OWNER=mCONFIG_IP_NF_MATCH_PHYSDEV=mCONFIG_IP_NF_FILTER=mCONFIG_IP_NF_TARGET_REJECT=mCONFIG_IP_NF_NAT=mCONFIG_IP_NF_NAT_NEEDED=yCONFIG_IP_NF_TARGET_MASQUERADE=mCONFIG_IP_NF_TARGET_REDIRECT=mCONFIG_IP_NF_TARGET_NETMAP=mCONFIG_IP_NF_TARGET_SAME=m
# CONFIG_IP_NF_NAT_LOCAL is not setCONFIG_IP_NF_NAT_SNMP_BASIC=mCONFIG_IP_NF_NAT_IRC=mCONFIG_IP_NF_NAT_FTP=mCONFIG_IP_NF_NAT_TFTP=mCONFIG_IP_NF_NAT_AMANDA=mCONFIG_IP_NF_MANGLE=mCONFIG_IP_NF_TARGET_TOS=mCONFIG_IP_NF_TARGET_ECN=mCONFIG_IP_NF_TARGET_DSCP=mCONFIG_IP_NF_TARGET_MARK=mCONFIG_IP_NF_TARGET_CLASSIFY=mCONFIG_IP_NF_TARGET_LOG=mCONFIG_IP_NF_TARGET_ULOG=mCONFIG_IP_NF_TARGET_TCPMSS=mCONFIG_IP_NF_ARPTABLES=mCONFIG_IP_NF_ARPFILTER=mCONFIG_IP_NF_ARP_MANGLE=m
#
# DECnet: Netfilter Configuration
#
# CONFIG_DECNET_NF_GRABULATOR is not set
#
# Bridge: Netfilter Configuration
#
# CONFIG_BRIDGE_NF_EBTABLES is not setCONFIG_XFRM=yCONFIG_XFRM_USER=m
#
# SCTP Configuration (EXPERIMENTAL)
#CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not setCONFIG_ATM=mCONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not setCONFIG_ATM_LANE=mCONFIG_ATM_MPOA=mCONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
# CONFIG_VLAN_8021Q is not setCONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_IPX is not setCONFIG_ATALK=mCONFIG_DEV_APPLETALK=y
# CONFIG_LTPC is not setCONFIG_COPS=m
# CONFIG_COPS_DAYNA is not set
# CONFIG_COPS_TANGENT is not setCONFIG_IPDDP=mCONFIG_IPDDP_ENCAP=yCONFIG_IPDDP_DECAP=y
# CONFIG_X25 is not setCONFIG_LAPB=m
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#CONFIG_NET_PKTGEN=mCONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not setCONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_ETHERTAP is not set
# CONFIG_NET_SB1000 is not set
#
# Ethernet (10 or 100Mbit)
#CONFIG_NET_ETHERNET=yCONFIG_MII=yCONFIG_HAPPYMEAL=mCONFIG_SUNGEM=m
# CONFIG_NET_VENDOR_3COM is not setCONFIG_LANCE=m
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not setCONFIG_AT1700=mCONFIG_DEPCA=mCONFIG_HP100=m
# CONFIG_NET_ISA is not setCONFIG_NET_PCI=yCONFIG_PCNET32=mCONFIG_AMD8111_ETH=mCONFIG_ADAPTEC_STARFIRE=mCONFIG_ADAPTEC_STARFIRE_NAPI=yCONFIG_AC3200=mCONFIG_APRICOT=mCONFIG_B44=m
CONFIG_CS89x0=mCONFIG_DGRS=mCONFIG_EEPRO100=mCONFIG_EEPRO100_PIO=yCONFIG_E100=mCONFIG_FEALNX=mCONFIG_NATSEMI=mCONFIG_NE2K_PCI=mCONFIG_8139CP=mCONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not setCONFIG_SIS900=mCONFIG_EPIC100=mCONFIG_SUNDANCE=mCONFIG_SUNDANCE_MMIO=yCONFIG_TLAN=mCONFIG_VIA_RHINE=m
# CONFIG_VIA_RHINE_MMIO is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not setCONFIG_PLIP=mCONFIG_PPP=y
# CONFIG_PPP_MULTILINK is not setCONFIG_PPP_FILTER=yCONFIG_PPP_ASYNC=yCONFIG_PPP_SYNC_TTY=yCONFIG_PPP_DEFLATE=yCONFIG_PPP_BSDCOMP=yCONFIG_PPPOE=mCONFIG_PPPOATM=mCONFIG_SLIP=m
# CONFIG_SLIP_COMPRESSED is not set
# CONFIG_SLIP_SMART is not set
# CONFIG_SLIP_MODE_SLIP6 is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not setCONFIG_SHAPER=m
# CONFIG_NET_POLL_CONTROLLER is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# PCMCIA network device support
#CONFIG_NET_PCMCIA=yCONFIG_PCMCIA_3C589=mCONFIG_PCMCIA_3C574=mCONFIG_PCMCIA_FMVJ18X=mCONFIG_PCMCIA_PCNET=mCONFIG_PCMCIA_NMCLAN=mCONFIG_PCMCIA_SMC91C92=mCONFIG_PCMCIA_XIRC2PS=mCONFIG_PCMCIA_AXNET=m
#
# ATM drivers
#
# CONFIG_ATM_TCP is not set
# CONFIG_ATM_LANAI is not set
# CONFIG_ATM_ENI is not set
# CONFIG_ATM_FIRESTREAM is not set
# CONFIG_ATM_ZATM is not set
# CONFIG_ATM_NICSTAR is not set
# CONFIG_ATM_IDT77252 is not set
# CONFIG_ATM_AMBASSADOR is not set
# CONFIG_ATM_HORIZON is not set
# CONFIG_ATM_IA is not set
# CONFIG_ATM_FORE200E_MAYBE is not set
# CONFIG_ATM_HE is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set
#
# Bluetooth support
#
# CONFIG_BT is not set
#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#CONFIG_INPUT=y
#
# Userland interfaces
#CONFIG_INPUT_MOUSEDEV=yCONFIG_INPUT_MOUSEDEV_PSAUX=yCONFIG_INPUT_MOUSEDEV_SCREEN_X=1024CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768CONFIG_INPUT_JOYDEV=mCONFIG_INPUT_TSDEV=mCONFIG_INPUT_TSDEV_SCREEN_X=240CONFIG_INPUT_TSDEV_SCREEN_Y=320CONFIG_INPUT_EVDEV=mCONFIG_INPUT_EVBUG=m
#
# Input I/O drivers
#CONFIG_GAMEPORT=mCONFIG_SOUND_GAMEPORT=mCONFIG_GAMEPORT_NS558=mCONFIG_GAMEPORT_L4=mCONFIG_GAMEPORT_EMU10K1=mCONFIG_GAMEPORT_VORTEX=mCONFIG_GAMEPORT_FM801=m
CONFIG_GAMEPORT_CS461x=mCONFIG_SERIO=yCONFIG_SERIO_I8042=yCONFIG_SERIO_SERPORT=mCONFIG_SERIO_CT82C710=mCONFIG_SERIO_PARKBD=mCONFIG_SERIO_PCIPS2=m
#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=yCONFIG_KEYBOARD_ATKBD=yCONFIG_KEYBOARD_SUNKBD=mCONFIG_KEYBOARD_XTKBD=mCONFIG_KEYBOARD_NEWTON=mCONFIG_INPUT_MOUSE=yCONFIG_MOUSE_PS2=yCONFIG_MOUSE_PS2_SYNAPTICS=yCONFIG_MOUSE_SERIAL=mCONFIG_MOUSE_INPORT=mCONFIG_MOUSE_ATIXL=yCONFIG_MOUSE_LOGIBM=mCONFIG_MOUSE_PC110PAD=m
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Character devices
#CONFIG_VT=yCONFIG_VT_CONSOLE=yCONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not set
# CONFIG_SERIAL_8250_CS is not set
# CONFIG_SERIAL_8250_ACPI is not setCONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#CONFIG_SERIAL_CORE=yCONFIG_UNIX98_PTYS=yCONFIG_UNIX98_PTY_COUNT=256CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not setCONFIG_PPDEV=mCONFIG_TIPAR=m
#
# I2C support
#CONFIG_I2C=yCONFIG_I2C_CHARDEV=y
#
# I2C Algorithms
#CONFIG_I2C_ALGOBIT=mCONFIG_I2C_ALGOPCF=m
#
# I2C Hardware Bus support
#CONFIG_I2C_ALI1535=mCONFIG_I2C_ALI15X3=mCONFIG_I2C_AMD756=mCONFIG_I2C_AMD8111=mCONFIG_I2C_ELEKTOR=mCONFIG_I2C_ELV=mCONFIG_I2C_I801=mCONFIG_I2C_I810=mCONFIG_I2C_ISA=mCONFIG_I2C_NFORCE2=mCONFIG_I2C_PHILIPSPAR=mCONFIG_I2C_PIIX4=mCONFIG_I2C_PROSAVAGE=mCONFIG_I2C_SAVAGE4=m
CONFIG_SCx200_ACB=mCONFIG_I2C_SIS5595=mCONFIG_I2C_SIS630=mCONFIG_I2C_SIS96X=mCONFIG_I2C_VELLEMAN=mCONFIG_I2C_VIA=mCONFIG_I2C_VIAPRO=mCONFIG_I2C_VOODOO3=m
#
# I2C Hardware Sensors Chip support
#CONFIG_I2C_SENSOR=mCONFIG_SENSORS_ADM1021=mCONFIG_SENSORS_EEPROM=mCONFIG_SENSORS_IT87=mCONFIG_SENSORS_LM75=mCONFIG_SENSORS_LM78=mCONFIG_SENSORS_LM85=mCONFIG_SENSORS_VIA686A=mCONFIG_SENSORS_W83781D=m
#
# Mice
#CONFIG_BUSMOUSE=mCONFIG_QIC02_TAPE=m
# CONFIG_QIC02_DYNCONF is not set
#
# Edit configuration parameters in ./include/linux/tpqic02.h! #
#
# IPMI
#CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not setCONFIG_IPMI_DEVICE_INTERFACE=mCONFIG_IPMI_KCS=mCONFIG_IPMI_WATCHDOG=m
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not setCONFIG_HW_RANDOM=mCONFIG_NVRAM=yCONFIG_RTC=yCONFIG_DTLK=mCONFIG_R3964=mCONFIG_APPLICOM=mCONFIG_SONYPI=m
#
# Ftape, the floppy tape device driver
#CONFIG_FTAPE=m
# CONFIG_ZFTAPE is not setCONFIG_FT_NR_BUFFERS=3
# CONFIG_FT_PROC_FS is not setCONFIG_FT_NORMAL_DEBUG=y
# CONFIG_FT_FULL_DEBUG is not set
# CONFIG_FT_NO_TRACE is not set
# CONFIG_FT_NO_TRACE_AT_ALL is not set
#
# Hardware configuration
#CONFIG_FT_STD_FDC=y
# CONFIG_FT_MACH2 is not set
# CONFIG_FT_PROBE_FC10 is not set
# CONFIG_FT_ALT_FDC is not setCONFIG_FT_FDC_THR=8CONFIG_FT_FDC_MAX_RATE=2000CONFIG_FT_ALPHA_CLOCK=0CONFIG_AGP=yCONFIG_AGP_ALI=mCONFIG_AGP_ATI=mCONFIG_AGP_AMD=mCONFIG_AGP_AMD64=mCONFIG_AGP_INTEL=mCONFIG_AGP_NVIDIA=mCONFIG_AGP_SIS=yCONFIG_AGP_SWORKS=mCONFIG_AGP_VIA=mCONFIG_DRM=yCONFIG_DRM_TDFX=mCONFIG_DRM_GAMMA=mCONFIG_DRM_R128=mCONFIG_DRM_RADEON=mCONFIG_DRM_I810=mCONFIG_DRM_I830=mCONFIG_DRM_MGA=mCONFIG_DRM_SIS=m
#
# PCMCIA character devices
#CONFIG_SYNCLINK_CS=mCONFIG_MWAVE=mCONFIG_RAW_DRIVER=mCONFIG_MAX_RAW_DEVS=256CONFIG_HANGCHECK_TIMER=m
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#CONFIG_FB=yCONFIG_FB_PM2=m
# CONFIG_FB_PM2_FIFO_DISCONNECT is not setCONFIG_FB_CYBER2000=m
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not setCONFIG_FB_VGA16=m
# CONFIG_FB_VESA is not set
# CONFIG_VIDEO_SELECT is not setCONFIG_FB_HGA=mCONFIG_FB_RIVA=mCONFIG_FB_I810=mCONFIG_FB_I810_GTF=yCONFIG_FB_MATROX=mCONFIG_FB_MATROX_MILLENIUM=yCONFIG_FB_MATROX_MYSTIQUE=yCONFIG_FB_MATROX_G450=yCONFIG_FB_MATROX_G100=yCONFIG_FB_MATROX_I2C=m
# CONFIG_FB_MATROX_MAVEN is not set
# CONFIG_FB_MATROX_MULTIHEAD is not setCONFIG_FB_RADEON=mCONFIG_FB_ATY128=mCONFIG_FB_ATY=m
# CONFIG_FB_ATY_CT is not set
# CONFIG_FB_ATY_GX is not setCONFIG_FB_SIS=mCONFIG_FB_SIS_300=yCONFIG_FB_SIS_315=yCONFIG_FB_NEOMAGIC=mCONFIG_FB_3DFX=mCONFIG_FB_VOODOO1=mCONFIG_FB_TRIDENT=mCONFIG_FB_VIRTUAL=m
#
# Console display driver support
#CONFIG_VGA_CONSOLE=yCONFIG_MDA_CONSOLE=mCONFIG_DUMMY_CONSOLE=yCONFIG_FRAMEBUFFER_CONSOLE=mCONFIG_PCI_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#CONFIG_LOGO=yCONFIG_LOGO_LINUX_MONO=yCONFIG_LOGO_LINUX_VGA16=yCONFIG_LOGO_LINUX_CLUT224=y
#
# Sound
#CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#CONFIG_SND=yCONFIG_SND_SEQUENCER=yCONFIG_SND_SEQ_DUMMY=mCONFIG_SND_OSSEMUL=yCONFIG_SND_MIXER_OSS=yCONFIG_SND_PCM_OSS=yCONFIG_SND_SEQUENCER_OSS=yCONFIG_SND_RTCTIMER=mCONFIG_SND_VERBOSE_PRINTK=y
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#CONFIG_SND_DUMMY=mCONFIG_SND_VIRMIDI=mCONFIG_SND_MTPAV=mCONFIG_SND_SERIAL_U16550=mCONFIG_SND_MPU401=m
#
# ISA devices
#CONFIG_SND_AD1848=mCONFIG_SND_CS4231=mCONFIG_SND_CS4232=mCONFIG_SND_CS4236=mCONFIG_SND_ES1688=mCONFIG_SND_ES18XX=mCONFIG_SND_GUSCLASSIC=mCONFIG_SND_GUSEXTREME=mCONFIG_SND_GUSMAX=mCONFIG_SND_INTERWAVE=mCONFIG_SND_INTERWAVE_STB=mCONFIG_SND_OPTI92X_AD1848=mCONFIG_SND_OPTI92X_CS4231=mCONFIG_SND_OPTI93X=mCONFIG_SND_SB8=mCONFIG_SND_SB16=mCONFIG_SND_SBAWE=mCONFIG_SND_SB16_CSP=yCONFIG_SND_WAVEFRONT=mCONFIG_SND_CMI8330=mCONFIG_SND_OPL3SA2=mCONFIG_SND_SGALAXY=mCONFIG_SND_SSCAPE=m
#
# PCI devices
#CONFIG_SND_ALI5451=mCONFIG_SND_AZT3328=mCONFIG_SND_CS46XX=mCONFIG_SND_CS46XX_NEW_DSP=yCONFIG_SND_CS4281=mCONFIG_SND_EMU10K1=mCONFIG_SND_KORG1212=mCONFIG_SND_NM256=mCONFIG_SND_RME32=mCONFIG_SND_RME96=mCONFIG_SND_RME9652=mCONFIG_SND_HDSP=mCONFIG_SND_TRIDENT=mCONFIG_SND_YMFPCI=mCONFIG_SND_ALS4000=mCONFIG_SND_CMIPCI=mCONFIG_SND_ENS1370=mCONFIG_SND_ENS1371=mCONFIG_SND_ES1938=mCONFIG_SND_ES1968=mCONFIG_SND_MAESTRO3=mCONFIG_SND_FM801=mCONFIG_SND_ICE1712=mCONFIG_SND_ICE1724=mCONFIG_SND_INTEL8X0=yCONFIG_SND_SONICVIBES=mCONFIG_SND_VIA82XX=mCONFIG_SND_VX222=m
#
# ALSA USB devices
#CONFIG_SND_USB_AUDIO=m
#
# PCMCIA devices
#CONFIG_SND_VXPOCKET=mCONFIG_SND_VXP440=m
#
# Open Sound System
#CONFIG_SOUND_PRIME=mCONFIG_SOUND_BT878=mCONFIG_SOUND_CMPCI=m CONFIG_SOUND_CMPCI_FM=y CONFIG_SOUND_CMPCI_FMIO=388
# CONFIG_SOUND_CMPCI_MIDI is not set
# CONFIG_SOUND_CMPCI_JOYSTICK is not set
# CONFIG_SOUND_CMPCI_CM8738 is not set CONFIG_SOUND_EMU10K1=m
# CONFIG_MIDI_EMU10K1 is not set CONFIG_SOUND_FUSION=mCONFIG_SOUND_CS4281=mCONFIG_SOUND_ES1370=mCONFIG_SOUND_ES1371=m CONFIG_SOUND_ESSSOLO1=m CONFIG_SOUND_MAESTRO=m CONFIG_SOUND_MAESTRO3=mCONFIG_SOUND_ICH=m CONFIG_SOUND_SONICVIBES=m CONFIG_SOUND_TRIDENT=m CONFIG_SOUND_MSNDCLAS=m CONFIG_MSNDCLAS_INIT_FILE="/etc/sound/msndinit.bin" CONFIG_MSNDCLAS_PERM_FILE="/etc/sound/msndperm.bin" CONFIG_SOUND_MSNDPIN=m CONFIG_MSNDPIN_INIT_FILE="/etc/sound/pndspini.bin" CONFIG_MSNDPIN_PERM_FILE="/etc/sound/pndsperm.bin" CONFIG_SOUND_VIA82CXXX=m
# CONFIG_MIDI_VIA82CXXX is not set CONFIG_SOUND_OSS=m
# CONFIG_SOUND_TRACEINIT is not set
# CONFIG_SOUND_DMAP is not set CONFIG_SOUND_AD1816=mCONFIG_SOUND_AD1889=m CONFIG_SOUND_SGALAXY=mCONFIG_SOUND_ADLIB=m CONFIG_SOUND_ACI_MIXER=m CONFIG_SOUND_CS4232=mCONFIG_SOUND_SSCAPE=mCONFIG_SOUND_GUS=mCONFIG_SOUND_GUS16=yCONFIG_SOUND_GUSMAX=yCONFIG_SOUND_VMIDI=mCONFIG_SOUND_TRIX=mCONFIG_SOUND_MSS=mCONFIG_SOUND_MPU401=mCONFIG_SOUND_NM256=mCONFIG_SOUND_MAD16=m
# CONFIG_MAD16_OLDCARD is not set CONFIG_SOUND_PAS=mCONFIG_SOUND_PSS=mCONFIG_PSS_MIXER=y
# CONFIG_PSS_HAVE_BOOT is not set CONFIG_SOUND_SB=m CONFIG_SOUND_AWE32_SYNTH=m CONFIG_SOUND_WAVEFRONT=m CONFIG_SOUND_MAUI=mCONFIG_SOUND_YM3812=m CONFIG_SOUND_OPL3SA1=m CONFIG_SOUND_OPL3SA2=m CONFIG_SOUND_YMFPCI=m CONFIG_SOUND_YMFPCI_LEGACY=y CONFIG_SOUND_UART6850=m CONFIG_SOUND_AEDSP16=mCONFIG_SC6600=yCONFIG_SC6600_JOY=yCONFIG_SC6600_CDROM=4 CONFIG_SC6600_CDROMBASE=0
# CONFIG_AEDSP16_MSS is not set
# CONFIG_AEDSP16_SBPRO is not set
# CONFIG_AEDSP16_MPU401 is not set CONFIG_SOUND_TVMIXER=m CONFIG_SOUND_KAHLUA=m CONFIG_SOUND_ALI5455=mCONFIG_SOUND_FORTE=mCONFIG_SOUND_RME96XX=m CONFIG_SOUND_AD1980=m
#
# USB support
#CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#CONFIG_USB_DEVICEFS=yCONFIG_USB_BANDWIDTH=yCONFIG_USB_DYNAMIC_MINORS=y
#
# USB Host Controller Drivers
#CONFIG_USB_EHCI_HCD=yCONFIG_USB_OHCI_HCD=mCONFIG_USB_UHCI_HCD=y
#
# USB Device Class drivers
#CONFIG_USB_AUDIO=mCONFIG_USB_BLUETOOTH_TTY=mCONFIG_USB_MIDI=mCONFIG_USB_ACM=mCONFIG_USB_PRINTER=yCONFIG_USB_STORAGE=yCONFIG_USB_STORAGE_DEBUG=y
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
CONFIG_USB_STORAGE_HP8200e=y
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
#
# USB Human Interface Devices (HID)
#CONFIG_USB_HID=yCONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not setCONFIG_USB_HIDDEV=yCONFIG_USB_AIPTEK=mCONFIG_USB_WACOM=mCONFIG_USB_KBTAB=mCONFIG_USB_POWERMATE=mCONFIG_USB_XPAD=m
#
# USB Imaging devices
#CONFIG_USB_MDC800=mCONFIG_USB_SCANNER=yCONFIG_USB_MICROTEK=mCONFIG_USB_HPUSBSCSI=m
#
# USB Multimedia devices
#CONFIG_USB_DABUSB=m
#
# Video4Linux support is needed for USB Multimedia device support #
#
# USB Network adaptors
#CONFIG_USB_CATC=mCONFIG_USB_KAWETH=mCONFIG_USB_PEGASUS=mCONFIG_USB_RTL8150=mCONFIG_USB_USBNET=m
#
# USB Host-to-Host Cables
#CONFIG_USB_AN2720=yCONFIG_USB_BELKIN=yCONFIG_USB_GENESYS=yCONFIG_USB_NET1080=yCONFIG_USB_PL2301=y
#
# Intelligent USB Devices/Gadgets
#CONFIG_USB_ARMLINUX=yCONFIG_USB_EPSON2888=yCONFIG_USB_ZAURUS=yCONFIG_USB_CDCETHER=y
#
# USB Network Adapters
#CONFIG_USB_AX8817X=y
#
# USB port drivers
#CONFIG_USB_USS720=m
#
# USB Serial Converter support
#CONFIG_USB_SERIAL=m
# CONFIG_USB_SERIAL_GENERIC is not setCONFIG_USB_SERIAL_BELKIN=mCONFIG_USB_SERIAL_WHITEHEAT=mCONFIG_USB_SERIAL_DIGI_ACCELEPORT=mCONFIG_USB_SERIAL_EMPEG=mCONFIG_USB_SERIAL_FTDI_SIO=mCONFIG_USB_SERIAL_VISOR=mCONFIG_USB_SERIAL_IPAQ=mCONFIG_USB_SERIAL_IR=mCONFIG_USB_SERIAL_EDGEPORT=mCONFIG_USB_SERIAL_EDGEPORT_TI=mCONFIG_USB_SERIAL_KEYSPAN_PDA=mCONFIG_USB_SERIAL_KEYSPAN=mCONFIG_USB_SERIAL_KEYSPAN_MPR=yCONFIG_USB_SERIAL_KEYSPAN_USA28=yCONFIG_USB_SERIAL_KEYSPAN_USA28X=yCONFIG_USB_SERIAL_KEYSPAN_USA28XA=yCONFIG_USB_SERIAL_KEYSPAN_USA28XB=yCONFIG_USB_SERIAL_KEYSPAN_USA19=yCONFIG_USB_SERIAL_KEYSPAN_USA18X=yCONFIG_USB_SERIAL_KEYSPAN_USA19W=yCONFIG_USB_SERIAL_KEYSPAN_USA19QW=yCONFIG_USB_SERIAL_KEYSPAN_USA19QI=yCONFIG_USB_SERIAL_KEYSPAN_USA49W=yCONFIG_USB_SERIAL_KEYSPAN_USA49WLC=yCONFIG_USB_SERIAL_KLSI=mCONFIG_USB_SERIAL_KOBIL_SCT=mCONFIG_USB_SERIAL_MCT_U232=mCONFIG_USB_SERIAL_PL2303=mCONFIG_USB_SERIAL_SAFE=mCONFIG_USB_SERIAL_SAFE_PADDED=yCONFIG_USB_SERIAL_CYBERJACK=mCONFIG_USB_SERIAL_XIRCOM=mCONFIG_USB_SERIAL_OMNINET=mCONFIG_USB_EZUSB=y
#
# USB Miscellaneous drivers
#CONFIG_USB_EMI26=mCONFIG_USB_TIGL=mCONFIG_USB_AUERSWALD=mCONFIG_USB_RIO500=mCONFIG_USB_BRLVGER=mCONFIG_USB_LCD=mCONFIG_USB_SPEEDTOUCH=mCONFIG_USB_TEST=mCONFIG_USB_GADGET=mCONFIG_USB_NET2280=mCONFIG_USB_ZERO=mCONFIG_USB_ZERO_NET2280=yCONFIG_USB_ETH=mCONFIG_USB_ETH_NET2280=yCONFIG_USB_GADGETFS=mCONFIG_USB_GADGETFS_NET2280=y
#
# File systems
#CONFIG_EXT2_FS=yCONFIG_EXT2_FS_XATTR=yCONFIG_EXT2_FS_POSIX_ACL=yCONFIG_EXT2_FS_SECURITY=yCONFIG_EXT3_FS=yCONFIG_EXT3_FS_XATTR=yCONFIG_EXT3_FS_POSIX_ACL=yCONFIG_EXT3_FS_SECURITY=yCONFIG_JBD=yCONFIG_JBD_DEBUG=yCONFIG_FS_MBCACHE=yCONFIG_REISERFS_FS=mCONFIG_REISERFS_CHECK=y
# CONFIG_REISERFS_PROC_INFO is not setCONFIG_JFS_FS=mCONFIG_JFS_POSIX_ACL=y
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not setCONFIG_FS_POSIX_ACL=yCONFIG_XFS_FS=m
# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_POSIX_ACL is not setCONFIG_MINIX_FS=mCONFIG_ROMFS_FS=m
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not setCONFIG_AUTOFS4_FS=y
#
# CD-ROM/DVD Filesystems
#CONFIG_ISO9660_FS=yCONFIG_JOLIET=yCONFIG_ZISOFS=yCONFIG_ZISOFS_FS=yCONFIG_UDF_FS=y
#
# DOS/FAT/NT Filesystems
#CONFIG_FAT_FS=yCONFIG_MSDOS_FS=yCONFIG_VFAT_FS=yCONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#CONFIG_PROC_FS=yCONFIG_PROC_KCORE=yCONFIG_DEVFS_FS=yCONFIG_DEVFS_MOUNT=y
# CONFIG_DEVFS_DEBUG is not setCONFIG_DEVPTS_FS=y
# CONFIG_DEVPTS_FS_XATTR is not setCONFIG_TMPFS=yCONFIG_HUGETLBFS=yCONFIG_HUGETLB_PAGE=yCONFIG_RAMFS=y
#
# Miscellaneous filesystems
#CONFIG_ADFS_FS=m
# CONFIG_ADFS_FS_RW is not setCONFIG_AFFS_FS=mCONFIG_HFS_FS=mCONFIG_BEFS_FS=mCONFIG_BEFS_DEBUG=yCONFIG_BFS_FS=mCONFIG_EFS_FS=mCONFIG_CRAMFS=mCONFIG_VXFS_FS=mCONFIG_HPFS_FS=mCONFIG_QNX4FS_FS=m
# CONFIG_QNX4FS_RW is not setCONFIG_SYSV_FS=mCONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
#
# Network File Systems
#CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not setCONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not setCONFIG_NFSD=y
# CONFIG_NFSD_V3 is not set
# CONFIG_NFSD_TCP is not setCONFIG_LOCKD=yCONFIG_EXPORTFS=yCONFIG_SUNRPC=y
# CONFIG_SUNRPC_GSS is not setCONFIG_SMB_FS=y
# CONFIG_SMB_NLS_DEFAULT is not setCONFIG_CIFS=mCONFIG_NCP_FS=m
# CONFIG_NCPFS_PACKET_SIGNING is not set
# CONFIG_NCPFS_IOCTL_LOCKING is not set
# CONFIG_NCPFS_STRONG is not set
# CONFIG_NCPFS_NFS_NS is not set
# CONFIG_NCPFS_OS2_NS is not set
# CONFIG_NCPFS_SMALLDOS is not set
# CONFIG_NCPFS_NLS is not set
# CONFIG_NCPFS_EXTRAS is not setCONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not setCONFIG_INTERMEZZO_FS=mCONFIG_AFS_FS=mCONFIG_RXRPC=m
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not setCONFIG_MSDOS_PARTITION=yCONFIG_SMB_NLS=yCONFIG_NLS=y
#
# Native Language Support
#CONFIG_NLS_DEFAULT="iso8859-1"CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not setCONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not setCONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not setCONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Profiling support
#CONFIG_PROFILING=yCONFIG_OPROFILE=m
#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not setCONFIG_DEBUG_SPINLOCK_SLEEP=yCONFIG_FRAME_POINTER=yCONFIG_X86_EXTRA_IRQS=yCONFIG_X86_FIND_SMP_CONFIG=yCONFIG_X86_MPPARSE=y
#
# Security options
#
# CONFIG_SECURITY is not set
#
# Cryptographic options
#CONFIG_CRYPTO=yCONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not setCONFIG_CRYPTO_MD5=mCONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not setCONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not setCONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_TEST is not set
#
# Library routines
#CONFIG_CRC32=yCONFIG_ZLIB_INFLATE=yCONFIG_ZLIB_DEFLATE=yCONFIG_X86_BIOS_REBOOT=yCONFIG_PC=y
Quoted 8 lines · Mario \"jorge\" Di Nitto
Quoted 3 lines
Please set
CONFIG_KALLSYMS=yand resend the oops trace so we can see where it crashed, thanks.I've changed some items in .config, and after next reboot I've got other failures like those I already wrote.
The last boot shows multiple oops (4 I think, in dmesg), see attached files for details.
OK, thanks.
Now please add the string "initcall_debug" to your kernel boot command line.
It will cause a lot of things like
calling initcall 0xNNNNNNNN
to be printed out. Please take the last one which is printed out before the crash and look it up in your System.map.
That will tell us which initcall initialisation function the kernel was running when it crashed.