Skip to contentSkip to conversation

Suspend and AGP in 2.6.0-test9

DISCUSSION Maciej Freudenheim 2 participants 2 messages Nov 3, 2003

lore
Share & tools
lore
#0 lore raw

Hi!

2.6.0-test9 is the first kernel with *almost* working suspend to ram and suspend to disk.

Well, almost, because when i run X with AGP support enabled i can't resume - either it hangs forever after displaying "Waiting for DMAs to settle down..." message or it reboots right after displaying it. When i force using of PCI bus for acceleration, then suspend (to ram as well as to disk) with resume works perfectly - but of course, with disabled agp everything is significantly slower.

So, my question is - is it known (and not fixable :) bug or it's something weird and shouldn't happen ? As fair as I googled for similar problems I have found that people usually have problems with DRI, it looks like agp works ok for most of them :) However, on my laptop disabling DRI doesn't help.

I have Dell Lattitude D600 with:
- ATI Technologies Inc Radeon R250 Lf [Radeon Mobility 9000 M9]
- Intel Corp. 82855PM Processor to AGP Controllerntel Corp. 82855PM
- Latest BIOS (A06)

Here is full output from dmesg, lspci and my current kernel config:

http://student.uci.agh.edu.pl/~fahren/dmesg
http://student.uci.agh.edu.pl/~fahren/lspci
http://student.uci.agh.edu.pl/~fahren/config.gz

I've tried both 2.6.0-test9 and 2.6.0-test9-mm1 with:
- XFree's radeon drivers (from XFree86's cvs) -
As i already wrote, everything work ok untill i load intel-agp module (or don't force "BusType" to "PCI" in XF86Config) - enabling/ disabling DRI doesn't seem to affect anything.

- ATI's fglrx drivers (ver. 3.2.8) - the same, with enabled "UseInternalAGPGART" i can't resume. When disabled and without loaded intel-agp module i can.

I'm suspending by writing to /proc/acpi/sleep - writing to /sys/power/state returns nice "call trace" screen.
On older versions of kernel (<= 2.6.0-test8*) suspend just doesn't work
- /proc/acpi/sleep behaves like /dev/null :)

If anyone know sollution for it *please* let me know. :>

BTW, standby mode doesn't work at all (and never had on 2.6.0-test* for me, with 2.4 it is ok) - it goes to sleep, but when resuming it hangs after displaying "PM: Finishing up."

Maciej Freudenheim.

#1 lore raw
Quoted 5 lines · Maciej Freudenheim

So, my question is - is it known (and not fixable :) bug or it's something weird and shouldn't happen ? As fair as I googled for similar problems I have found that people usually have problems with DRI, it looks like agp works ok for most of them :) However, on my laptop disabling DRI doesn't help.

Suspend/Resume code in agpgart is virtually non-existant. I've not had chance to try suspend recently, but when I last looked at it, it wasn't in a state that made debugging particularly easy. (It's hard to see if you got things right, if it won't resume for eg). I've not had chance to try it again more recently. It's possible the various changes that have gone on over the last month or so have improved the situation somewhat.

Dave