Skip to contentSkip to conversation

ide-scsi question: 2x

DISCUSSION Nico Schottelius 4 participants 5 messages Nov 6, 2003

lore
Share & tools
lore
#0 lore raw

Hello!

1. why is printk used without KERN_* makro?
like ' printk("[ ");' (267), ide-scsi from 2.6.0test9, version 0.92
(there are more examples)

2. is the command line hdx=ide-scsi still necessary?
-> if not, we should update the help
Can't we pass the options via module parameters (if it is a module) ? -> if yes, we should update the help
-> if no, is it possible to implement it?

Nico

#1 lore raw
Quoted 1 line · Nico Schottelius

Hello!

Hi,

Quoted 3 lines

1. why is printk used without KERN_* makro?
like ' printk("[ ");' (267), ide-scsi from 2.6.0test9, version
0.92 (there are more examples)

Because it was not updated to use KERN_*?

Quoted 1 line

2. is the command line hdx=ide-scsi still necessary?

Yes, IMO "hdx=driver_name" should be removed instead.

Quoted 2 lines

-> if not, we should update the help
Can't we pass the options via module parameters (if it is a module) ?

It is possible for ide-cd, I don't remember about ide-scsi. Anyway not modular case is the more difficult one.

Quoted 1 line

-> if yes, we should update the help

Dunno.

BTW I don't think you'll get response from gadio.

--bartlomiej

#2 lore raw

Bartlomiej Zolnierkiewicz [Thu, Nov 06, 2003 at 03:58:40PM +0100]:

Quoted 5 lines
Quoted 3 lines

1. why is printk used without KERN_* makro?
like ' printk("[ ");' (267), ide-scsi from 2.6.0test9, version
0.92 (there are more examples)

Because it was not updated to use KERN_*?

If somebody tells me what KERN_* are possible, I will update ide-scsi.

Quoted 3 lines
Quoted 1 line

2. is the command line hdx=ide-scsi still necessary?

Yes, IMO "hdx=driver_name" should be removed instead.

I rechecked this: It is not necessary anymore.

Quoted 4 lines
Quoted 2 lines

-> if yes, we should update the help

Dunno.

If I update the helpfile, who takes the patch?

Quoted 1 line

BTW I don't think you'll get response from gadio.

Why not?

Nico

#3 lore raw
Quoted 5 lines · Nico Schottelius
Quoted 3 lines
Quoted 1 line

2. is the command line hdx=ide-scsi still necessary?

Yes, IMO "hdx=driver_name" should be removed instead.

I rechecked this: It is not necessary anymore.

So how do you put drive to scsi emulation if you don't use procfs?

Quoted 5 lines
Quoted 3 lines
Quoted 1 line

-> if yes, we should update the help

Dunno.

If I update the helpfile, who takes the patch?

Me if it is okay.

--bartlomiej

#4 lore raw
In reply to Bartlomiej Zolnierkiewicz
Followup to:  <[email protected]>
By author:    Bartlomiej Zolnierkiewicz <[email protected]>
In newsgroup: linux.dev.kernel
Quoted 12 lines · Nico Schottelius
Quoted 1 line

Hello!

Hi,

Quoted 3 lines

1. why is printk used without KERN_* makro?
like ' printk("[ ");' (267), ide-scsi from 2.6.0test9, version
0.92 (there are more examples)

Because it was not updated to use KERN_*?

Unfortunately the interface is a bit braindead. KERN_* only applies to the beginning of a line.

-hpa

Signature · 4 lines
<[email protected]> at work, <[email protected]> in private!
If you send me mail in HTML format I will assume it's spam.
"Unix gives you enough rope to shoot yourself in the foot."
Architectures needed: ia64 m68k mips64 ppc ppc64 s390 s390x sh v850 x86-64