Skip to contentSkip to conversation

Weird partititon recocnising problem in 2.6.0-testX

DISCUSSION Konstantin Kletschke 2 participants 4 messages Nov 10, 2003

lore
Share & tools
lore
#1 lore raw
Quoted 6 lines · Konstantin Kletschke

We have a new boot log at

http://ludenkalle.de/ide_change_kernel.txt

With CONFIG_BLK_DEV_IDEDISK=y but unset CONFIG_BLK_DEV_HD_IDE and the inserted (and no used) printk stuff.

Good. Now it really does partition reading.
At some later time we must come back and find out what is wrong with hd.c. You call the printk stuff unused, but it was used and printed

partition start 63 size 4096512 type 85 p1
partition start 4096575 size 15904350 type 85 p2
partition start 0 size 0 type 0
partition start 0 size 0 type 0

Let us compare with your data from earlier:

   Device Boot    Start       End    Blocks   Id  System
/dev/hda1   *         1       365   2931831   83  Linux
/dev/hda2           366      1245   7068600    5  Extended
/dev/hda5           366       487    979933+  83  Linux
/dev/hda6          1185      1245    489951   82  Linux swap

Clearly, you have EZDrive installed, the table below is what is found in sector 1, the data printed above is what is in sector 0. The tables differ - fdisk was used after installation of EZDrive.

I suppose that booting with boot parameter "hda=remap" should work. At some later time we must worry about how to get rid of EZDrive.

Andries

#2 lore raw
Quoted 7 lines · Andries Brouwer
Quoted 3 lines

With CONFIG_BLK_DEV_IDEDISK=y but unset CONFIG_BLK_DEV_HD_IDE and the inserted (and no used) printk stuff.

At some later time we must come back and find out what is wrong with hd.c. You call the printk stuff unused, but it was used and printed

It was unused earlier, now, with CONFIG_BLK_DEV_IDEDISK=y but _unset_ CONFIG_BLK_DEV_HD_IDE it gets printed (to clear that).

Quoted 4 lines

Clearly, you have EZDrive installed, the table below is what is found in sector 1, the data printed above is what is in sector 0. The tables differ - fdisk was used after installation of EZDrive.

Hm, interesting... I don't know what was on this disk in earlier days... So it may be a help dd'ing Sektor 0 and 1 and create new table?

But of course after debugging that if you are interesting in that (which seems to be the case here :)).

Here is what 2.6.0-test6-mm4 looks like when booting (wo printk mod):

http://ludenkalle.de/2.6.0-test6-mm4.txt

Quoted 2 lines

I suppose that booting with boot parameter "hda=remap" should work. At some later time we must worry about how to get rid of EZDrive.

OK, lets see...

Konsti

Signature · 5 lines
2.6.0-test8-love3
Konstantin Kletschke <[email protected]>, <[email protected]>
GPG KeyID EF62FCEF
Fingerprint: 13C9 B16B 9844 EC15 CC2E  A080 1E69 3FDA EF62 FCEF
keulator.homelinux.org up 2:00, 18 users