Toshiba P25-S507 laptop and freezes with 2.6.0-test9
My Toshiba P25-S507 P4 2.8 running vanilla 2.6.0-test9 occasionally freezes. The freezes occur during events such as closing or opening the lid or removing/inserting the power adapter and sometimes during halt.
The freezes are reasonably rare. Occuring perhaps once every 3 days or so.
On the other hand, I have not been able to force one. Purposely playing with the power or the lid switch I have not been able to cause the freeze. However, everytime it happens it has been associated with one of the actions listed above.
I believe the freezes do happen with earlier 2.6.0-test kernels, but they seemed more rare then.
I don't recall a freeze ever occuring with 2.4.20-gentoo-r5.
Signature · 1 line
Brian Litzinger
Quoted 5 lines · * [email protected] ([email protected]) wrote:
My Toshiba P25-S507 P4 2.8 running vanilla 2.6.0-test9 occasionally freezes. The freezes occur during events such as closing or opening the lid or removing/inserting the power adapter and sometimes during halt.
These are ACPI events (at least lid and power adaptor). So, are you compiling in ACPI support? If so does it still happen with acpi=off kernel command line option? Do you still have keyboard when it freezes? If so, alt-sysrq-p or alt-sysrq-t show anything useful? And, finally, you aren't using an nVidia binary only module for that GeForce are you?
thanks,
-chris
Signature · 1 line
Linux Security Modules http://lsm.immunix.org http://lsm.bkbits.net
Quoted 5 lines · * [email protected] ([email protected]) wrote:
Quoted 4 lines
My Toshiba P25-S507 P4 2.8 running vanilla 2.6.0-test9 occasionally freezes. The freezes occur during events such as closing or opening the lid or removing/inserting the power adapter and sometimes during halt.
Quoted 5 lines · Chris Wright
These are ACPI events (at least lid and power adaptor). So, are you compiling in ACPI support? If so does it still happen with acpi=off kernel command line option? Do you still have keyboard when it freezes? If so, alt-sysrq-p or alt-sysrq-t show anything useful? And, finally, you aren't using an nVidia binary only module for that GeForce are you?
Yes I use APCI support.
Ah, I have been trying to use 'noacpi' so I guess I have failed to turn it off. I'll give 'acpi=off' a try.
The keyboard is as dead as the rest of the system.
I am running the nVidia binary module.
I'll run 'acpi=off' for a week or two and then try the nv driver.
Thanks for the help,
Signature · 1 line
Brian Litzinger