PROBLEM: 2.4.23-rc4 -> rc1 hang with change to ip_nat_core.c made in pre4
submitted Wed Nov 12 14:12:56 HST 2003 by Beau E. Cox <[email protected]>
*******************************************************************
* This problem is driving me crazy. This is the forth
* report I have made and the only response has been
* a request that I isolate where in the development
* line the problem began to appear; I have done this
* and, after compliing and testing lots of kernels
* have isolated the problem to a patch made to
* ip_nat_core.c in pre4 (see X). I am trying to let the
* right developer know of my woes, and would really
* like some help in solving this problem. Please let
* me know if I should address someone else or if I can
* provide more information and/or testing. I would
* like to reslove this before 23 comes out.
******************************************************************
[1.] One line summary of the problem:
Starting with 2.4.23-pre4 my system hangs during startup and/or is generally unstable - may be network related (see [ X. ] below.)
[2.] Full description of the problem/report:
Origionally I had catagorized this problem with the startup sequence; the system always seemed to hang when squid was started before mysql, etc. Moving squid near the end of the startup process, I thought the problem was in hand. However, the system (pre9) proved unstable (would not stay up for longer than one day.)
The problem exibits itself with a solid 'hang'; no oops, no dumps, nada.
[3.] Keywords (i.e., modules, networking, kernel):
networking, netfilter
[4.] Kernel version (from /proc/version):
--- /proc/version ---
Linux version 2.4.23-rc1 (Beau E. Cox: [email protected]) (gcc version 3.2.3) #1 SMP Sat Nov 8 04:33:36 HST 2003
[5.] Output of Oops.. message (if applicable) with symbolic information
resolved (see Documentation/oops-tracing.txt)
n/a
[6.] A small shell script or example program which triggers the
problem (if possible)
n/a
[7.] Environment
[7.1.] Software (add the output of the ver_linux script here)
--- ver_linux ---
If some fields are empty or look unusual you may have an old version. Compare to the current minimal requirements in Documentation/Changes.
Linux cathy.beaucox.com 2.4.23-rc1 #1 SMP Wed Nov 12 13:33:36 HST 2003 i686 unknown unknown GNU/Linux
Gnu C 3.2.3 Gnu make 3.80 util-linux 2.12 mount 2.12 modutils 2.4.26 e2fsprogs 1.34 jfsutils 1.1.4 Linux C Library 2.3.2 Dynamic linker (ldd) 2.3.2 Procps 3.1.14 Net-tools 1.60 Console-tools 0.2.3 Sh-utils 5.0 Modules Loaded serial isa-pnp parport_pc lp parport ipt_REDIRECT
ipt_limit ipt_state ip_nat_ftp iptable_nat ip_conntrack_ftp ip_conntrack iptable_filter ip_tables ide-scsi rtc
[7.2.] Processor information (from /proc/cpuinfo):
--- /proc/cpuinfo ---
processor : 0vendor_id : AuthenticAMD
cpu family : 6
model : 6
model name : AMD Athlon(tm) MP Processor 1600+
stepping : 2
cpu MHz : 1400.048
cache size : 256 KBfdiv_bug : nohlt_bug : nof00f_bug : nocoma_bug : no
fpu : yesfpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat
pse36 mmx fxsr sse syscall mp mmxext 3dnowext 3dnow
bogomips : 2791.83
processor : 1vendor_id : AuthenticAMD
cpu family : 6
model : 6
model name : AMD Athlon(tm) Processor
stepping : 2
cpu MHz : 1400.048
cache size : 256 KBfdiv_bug : nohlt_bug : nof00f_bug : nocoma_bug : no
fpu : yesfpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat
pse36 mmx fxsr sse syscall mp mmxext 3dnowext 3dnow
bogomips : 2798.38
[7.3.] Module information (from /proc/modules):
--- /proc/modules ---
serial 50628 0 (autoclean) isa-pnp 32292 0 (autoclean) [serial] parport_pc 23496 1 (autoclean) lp 6976 0 (autoclean) parport 27008 1 (autoclean) [parport_pc lp] ipt_REDIRECT 824 1 (autoclean) ipt_limit 1016 1 (autoclean) ipt_state 568 4 (autoclean) ip_nat_ftp 3024 0 (unused) iptable_nat 17848 2 [ipt_REDIRECT ip_nat_ftp] ip_conntrack_ftp 4144 1 [ip_nat_ftp] ip_conntrack 21544 3 [ipt_REDIRECT ipt_state ip_nat_ftp
iptable_nat ip_conntrack_ftp]iptable_filter 1740 1 (autoclean)ip_tables 13152 7 [ipt_REDIRECT ipt_limit ipt_state iptable_natiptable_filter]
ide-scsi 10480 0
rtc 7676 0 (autoclean)
[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
--- /proc/ioports ---
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(auto)
0376-0376 : ide1
0378-037a : parport0
037b-037f : parport0
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
1000-10ff : Linksys Network Everywhere Fast Ethernet 10/100 model NC100
1000-10ff : tulip
1400-14ff : National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller
1400-14ff : eth1
1810-1813 : Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P] System Controller
2000-2fff : PCI Bus #01
2000-20ff : ATI Technologies Inc Rage 128 PF/PRO AGP 4x TMDS
f000-f00f : Advanced Micro Devices [AMD] AMD-766 [ViperPlus] IDE
f000-f007 : ide0
f008-f00f : ide1
--- /proc/iomem ---
00000000-0009f7ff : System RAM
0009f800-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000dc000-000dcfff : Advanced Micro Devices [AMD] AMD-766 [ViperPlus] USB 000e0000-000effff : Extension ROM
000f0000-000fffff : System ROM
00100000-3fffffff : System RAM
00100000-0029be69 : Kernel code
0029be6a-00300543 : Kernel data
f0001000-f0001fff : National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller
f0001000-f0001fff : eth1
f0002000-f00023ff : Linksys Network Everywhere Fast Ethernet 10/100 model NC100
f0002000-f00023ff : tulip
f0003000-f0003fff : Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P] System Controller
f0100000-f01fffff : PCI Bus #01
f0100000-f0103fff : ATI Technologies Inc Rage 128 PF/PRO AGP 4x TMDS
f4000000-f7ffffff : Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P] System Controller
f8000000-fbffffff : PCI Bus #01
f8000000-fbffffff : ATI Technologies Inc Rage 128 PF/PRO AGP 4x TMDS
[7.5.] PCI information ('lspci -vvv' as root)
00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P] System Controller (rev 11)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 64 Region 0: Memory at f4000000 (32-bit, prefetchable) [size=64M] Region 1: Memory at f0003000 (32-bit, prefetchable) [size=4K] Region 2: I/O ports at 1810 [disabled] [size=4] Capabilities: [a0] AGP version 2.0 Status: RQ=16 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4 Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x4
00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P] AGP Bridge (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 99 Bus: primary=00, secondary=01, subordinate=01, sec-latency=68 I/O behind bridge: 00002000-00002fff Memory behind bridge: f0100000-f01fffff Prefetchable memory behind bridge: f8000000-fbffffff BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-766 [ViperPlus] ISA (rev
02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-766 [ViperPlus] IDE (rev 01) (prog-if 8a [Master SecP PriP])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 Region 4: I/O ports at f000 [size=16]
00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-766 [ViperPlus] ACPI (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
00:07.4 USB Controller: Advanced Micro Devices [AMD] AMD-766 [ViperPlus] USB (rev 07) (prog-if 10 [OHCI])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 16 (20000ns max) Interrupt: pin D routed to IRQ 11 Region 0: Memory at 000dc000 (32-bit, non-prefetchable) [size=4K]
00:0a.0 Ethernet controller: Linksys Network Everywhere Fast Ethernet 10/100 model NC100 (rev 11)
Subsystem: Linksys: Unknown device 0574
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (63750ns min, 63750ns max), cache line size 10 Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at 1000 [size=256] Region 1: Memory at f0002000 (32-bit, non-prefetchable) [size=1K] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=100mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0b.0 Ethernet controller: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller
Subsystem: Netgear: Unknown device f311
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 90 (2750ns min, 13000ns max) Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at 1400 [size=256] Region 1: Memory at f0001000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at <unassigned> [disabled] [size=64K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=320mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME+
01:05.0 VGA compatible controller: ATI Technologies Inc Rage 128 PF/PRO AGP 4x TMDS (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc Rage Fury Pro/Xpert 2000 Pro
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+
SERR- FastB2B+
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 66 (2000ns min), cache line size 10 Interrupt: pin A routed to IRQ 10 Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M] Region 1: I/O ports at 2000 [size=256] Region 2: Memory at f0100000 (32-bit, non-prefetchable) [size=16K] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: [50] AGP version 2.0 Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4 Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW- Rate=<none> Capabilities: [5c] Power Management version 2 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
[7.6.] SCSI information (from /proc/scsi/scsi)
--- /proc/scsi/scsi ---
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: SAMSUNG Model: CD-ROM SC-152L Rev: C100
Type: CD-ROM ANSI SCSI revision: 02
[7.7.] Other information that might be relevant to the problem
(please look in /proc and include all information that you think to be relevant):
--- /proc/ide/amd74xx ---
----------AMD BusMastering IDE Configuration----------------
Driver Version: 2.10 South Bridge: Advanced Micro Devices [AMD] AMD-766 [ViperPlus] IDE Revision: IDE 0x1 Highest DMA rate: UDMA100 BM-DMA base: 0xf000 PCI clock: 33.3MHz -----------------------Primary IDE-------Secondary IDE------ Prefetch Buffer: no no Post Write Buffer: no no Enabled: yes yes Simplex only: no no Cable Type: 80w 40w -------------------drive0----drive1----drive2----drive3----- Transfer Mode: UDMA PIO DMA PIO Address Setup: 30ns 90ns 30ns 90ns Cmd Active: 90ns 90ns 90ns 90ns Cmd Recovery: 30ns 30ns 30ns 30ns Data Active: 90ns 180ns 90ns 180ns Data Recovery: 30ns 450ns 30ns 450ns Cycle Time: 20ns 630ns 120ns 630ns Transfer Rate: 99.9MB/s 3.1MB/s 16.6MB/s 3.1MB/s
--- /proc/ide/drivers ---
ide-scsi version 0.93
ide-disk version 1.17
ide-default version 0.9.newide
--- all config settings (grep -v "is not set" .config) ---
#
# Automatically generated by make menuconfig: don't edit #CONFIG_X86=yCONFIG_UID16=y
#
# Code maturity level options
#CONFIG_EXPERIMENTAL=y
#
# Loadable module support
#CONFIG_MODULES=yCONFIG_MODVERSIONS=yCONFIG_KMOD=y
#
# Processor type and features
#CONFIG_MK7=yCONFIG_X86_WP_WORKS_OK=yCONFIG_X86_INVLPG=yCONFIG_X86_CMPXCHG=yCONFIG_X86_XADD=yCONFIG_X86_BSWAP=yCONFIG_X86_POPAD_OK=yCONFIG_RWSEM_XCHGADD_ALGORITHM=yCONFIG_X86_L1_CACHE_SHIFT=6CONFIG_X86_HAS_TSC=yCONFIG_X86_GOOD_APIC=yCONFIG_X86_USE_3DNOW=yCONFIG_X86_PGE=yCONFIG_X86_USE_PPRO_CHECKSUM=yCONFIG_X86_F00F_WORKS_OK=yCONFIG_X86_MCE=yCONFIG_X86_CPUID=yCONFIG_HIGHMEM4G=yCONFIG_HIGHMEM=yCONFIG_HIGHIO=yCONFIG_MTRR=yCONFIG_SMP=yCONFIG_NR_CPUS=32CONFIG_X86_TSC=yCONFIG_HAVE_DEC_LOCK=y
#
# General setup
#CONFIG_NET=yCONFIG_X86_IO_APIC=yCONFIG_X86_LOCAL_APIC=yCONFIG_PCI=yCONFIG_PCI_GOANY=yCONFIG_PCI_BIOS=yCONFIG_PCI_DIRECT=yCONFIG_ISA=yCONFIG_PCI_NAMES=yCONFIG_SYSVIPC=yCONFIG_SYSCTL=yCONFIG_KCORE_ELF=yCONFIG_BINFMT_ELF=y
#
# ACPI Support
#CONFIG_ACPI_BOOT=y
#
# Memory Technology Devices (MTD)
#
#
# Parallel port support
#CONFIG_PARPORT=mCONFIG_PARPORT_PC=mCONFIG_PARPORT_PC_CML1=mCONFIG_PARPORT_PC_FIFO=yCONFIG_PARPORT_1284=y
#
# Plug and Play configuration
#CONFIG_PNP=mCONFIG_ISAPNP=m
#
# Block devices
#CONFIG_BLK_DEV_FD=mCONFIG_BLK_DEV_LOOP=mCONFIG_BLK_DEV_NBD=mCONFIG_BLK_DEV_RAM=mCONFIG_BLK_DEV_RAM_SIZE=4096
#
# Multi-device support (RAID and LVM)
#
#
# Networking options
#CONFIG_PACKET=yCONFIG_PACKET_MMAP=yCONFIG_NETFILTER=yCONFIG_UNIX=yCONFIG_INET=y
#
# IP: Netfilter Configuration
#CONFIG_IP_NF_CONNTRACK=mCONFIG_IP_NF_FTP=mCONFIG_IP_NF_IRC=mCONFIG_IP_NF_QUEUE=mCONFIG_IP_NF_IPTABLES=mCONFIG_IP_NF_MATCH_LIMIT=mCONFIG_IP_NF_MATCH_MAC=mCONFIG_IP_NF_MATCH_MARK=mCONFIG_IP_NF_MATCH_MULTIPORT=mCONFIG_IP_NF_MATCH_TOS=mCONFIG_IP_NF_MATCH_AH_ESP=mCONFIG_IP_NF_MATCH_LENGTH=mCONFIG_IP_NF_MATCH_TTL=mCONFIG_IP_NF_MATCH_TCPMSS=mCONFIG_IP_NF_MATCH_STATE=mCONFIG_IP_NF_MATCH_UNCLEAN=mCONFIG_IP_NF_MATCH_OWNER=mCONFIG_IP_NF_FILTER=mCONFIG_IP_NF_TARGET_REJECT=mCONFIG_IP_NF_TARGET_MIRROR=mCONFIG_IP_NF_NAT=mCONFIG_IP_NF_NAT_NEEDED=yCONFIG_IP_NF_TARGET_MASQUERADE=mCONFIG_IP_NF_TARGET_REDIRECT=mCONFIG_IP_NF_NAT_SNMP_BASIC=mCONFIG_IP_NF_NAT_IRC=mCONFIG_IP_NF_NAT_FTP=mCONFIG_IP_NF_MANGLE=mCONFIG_IP_NF_TARGET_TOS=mCONFIG_IP_NF_TARGET_MARK=mCONFIG_IP_NF_TARGET_LOG=mCONFIG_IP_NF_TARGET_ULOG=mCONFIG_IP_NF_TARGET_TCPMSS=m
#
# IP: Virtual Server Configuration
#
#
# SCTP Configuration (EXPERIMENTAL)
#CONFIG_IPV6_SCTP__=y
#
# Appletalk devices
#
#
# QoS and/or fair queueing
#
#
# Network testing
#
#
# Telephony Support
#
#
# ATA/IDE/MFM/RLL support
#CONFIG_IDE=y
#
# IDE, ATA and ATAPI Block devices
#CONFIG_BLK_DEV_IDE=yCONFIG_BLK_DEV_IDEDISK=yCONFIG_IDEDISK_MULTI_MODE=yCONFIG_BLK_DEV_IDECD=mCONFIG_BLK_DEV_IDESCSI=mCONFIG_BLK_DEV_IDEPCI=yCONFIG_IDEPCI_SHARE_IRQ=yCONFIG_BLK_DEV_IDEDMA_PCI=yCONFIG_IDEDMA_PCI_AUTO=yCONFIG_BLK_DEV_IDEDMA=yCONFIG_IDEDMA_PCI_WIP=yCONFIG_BLK_DEV_ADMA100=yCONFIG_BLK_DEV_AMD74XX=yCONFIG_IDEDMA_AUTO=yCONFIG_BLK_DEV_IDE_MODES=y
#
# SCSI support
#CONFIG_SCSI=yCONFIG_BLK_DEV_SR=mCONFIG_BLK_DEV_SR_VENDOR=yCONFIG_SR_EXTRA_DEVS=2CONFIG_CHR_DEV_SG=mCONFIG_SCSI_CONSTANTS=y
#
# SCSI low-level drivers
#
#
# Fusion MPT device support
#
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
#
# I2O device support
#
#
# Network device support
#CONFIG_NETDEVICES=y
#
# ARCnet devices
#
#
# Ethernet (10 or 100Mbit)
#CONFIG_NET_ETHERNET=yCONFIG_NET_PCI=yCONFIG_TULIP=yCONFIG_NATSEMI=y
#
# Ethernet (1000 Mbit)
#
#
# Wireless LAN (non-hamradio)
#
#
# Token Ring devices
#
#
# Wan interfaces
#
#
# Amateur Radio support
#
#
# IrDA (infrared) support
#
#
# ISDN subsystem
#
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
#
# Input core support
#CONFIG_INPUT=mCONFIG_INPUT_JOYDEV=mCONFIG_INPUT_EVDEV=m
#
# Character devices
#CONFIG_VT=yCONFIG_VT_CONSOLE=yCONFIG_SERIAL=mCONFIG_SERIAL_EXTENDED=yCONFIG_SERIAL_SHARE_IRQ=yCONFIG_UNIX98_PTYS=yCONFIG_UNIX98_PTY_COUNT=256CONFIG_PRINTER=m
#
# I2C support
#
#
# Mice
#CONFIG_MOUSE=yCONFIG_PSMOUSE=y
#
# Joysticks
#
#
# Watchdog Cards
#CONFIG_RTC=m
#
# Ftape, the floppy tape device driver
#
#
# Direct Rendering Manager (XFree86 DRI support)
#
#
# Multimedia devices
#
#
# File systems
#CONFIG_AUTOFS_FS=yCONFIG_AUTOFS4_FS=yCONFIG_REISERFS_FS=yCONFIG_EXT3_FS=yCONFIG_JBD=yCONFIG_FAT_FS=mCONFIG_VFAT_FS=mCONFIG_TMPFS=yCONFIG_RAMFS=yCONFIG_ISO9660_FS=yCONFIG_JOLIET=yCONFIG_ZISOFS=yCONFIG_PROC_FS=yCONFIG_DEVFS_FS=yCONFIG_DEVPTS_FS=yCONFIG_EXT2_FS=y
#
# Network File Systems
#CONFIG_NFS_FS=yCONFIG_NFS_V3=yCONFIG_NFS_DIRECTIO=yCONFIG_NFSD=yCONFIG_NFSD_V3=yCONFIG_NFSD_TCP=yCONFIG_SUNRPC=yCONFIG_LOCKD=yCONFIG_LOCKD_V4=yCONFIG_SMB_FS=yCONFIG_SMB_NLS_DEFAULT=yCONFIG_SMB_NLS_REMOTE="cp437"CONFIG_ZISOFS_FS=y
#
# Partition Types
#CONFIG_PARTITION_ADVANCED=yCONFIG_MSDOS_PARTITION=yCONFIG_SMB_NLS=yCONFIG_NLS=y
#
# Native Language Support
#CONFIG_NLS_DEFAULT="iso8859-1"CONFIG_NLS_CODEPAGE_437=mCONFIG_NLS_ISO8859_1=m
#
# Console drivers
#CONFIG_VGA_CONSOLE=yCONFIG_VIDEO_SELECT=y
#
# Frame-buffer support
#
#
# Sound
#
#
# USB support
#CONFIG_USB=mCONFIG_USB_PRINTER=m
#
# USB Serial Converter support
#
#
# Support for USB gadgets
#
#
# Bluetooth support
#
#
# Kernel hacking
#CONFIG_LOG_BUF_SHIFT=0
#
# Cryptographic options
#
#
# Library routines
#CONFIG_ZLIB_INFLATE=yCONFIG_ZLIB_DEFLATE=m
[X.] Other notes, patches, fixes, workarounds:
I rolled back the change to ip_nat_core.c made in pre4 (to pre3 level) and the system is stable. My patch:
--- linux-2.4.23-pre4/net/ipv4/netfilter/ip_nat_core.c 2003-11-08
03:01:59.000000000 -1000
+++ linux-2.4.23-pre3/net/ipv4/netfilter/ip_nat_core.c 2003-11-08
03:00:47.000000000 -1000
@@ -157,8 +157,8 @@
continue;
}
- if (!(mr->range[i].flags & IP_NAT_RANGE_PROTO_SPECIFIED)
- || proto->in_range(&newtuple, IP_NAT_MANIP_SRC,
+ if ((mr->range[i].flags & IP_NAT_RANGE_PROTO_SPECIFIED)
+ && proto->in_range(&newtuple, IP_NAT_MANIP_SRC,
&mr->range[i].min, &mr->range[i].max))
return 1;
}
Aloha => Beau;
Marcelo has reverted the change in question, so his current 2.4.x tree should be fine.
Quoted 2 lines · David S. Miller
Marcelo has reverted the change in question, so his current 2.4.x tree should be fine.
Thank you so much.
I guess this makes me an honary Linux kernel contribitor, er... uncontributor... :)
Aloha => Beau;
Quoted 8 lines · On Wed, 12 Nov 2003 19:24:38 -1000 "Beau E. Cox" <[email protected]> wrote:
Quoted 2 lines · David S. Miller
Marcelo has reverted the change in question, so his current 2.4.x tree should be fine.
Thank you so much.
I guess this makes me an honary Linux kernel contribitor, er... uncontributor... :)
I take what I said back temporarily, Marcelo didn't revert the change yet but I have just reminded him to do so.
It should be fixed by the time 2.4.23 final rolls out.
Quoted 9 lines · David S. Miller
Quoted 6 lines · On Wed, 12 Nov 2003 19:24:38 -1000 "Beau E. Cox" <[email protected]> wrote:
Quoted 2 lines · David S. Miller
Marcelo has reverted the change in question, so his current 2.4.x tree should be fine.
Thank you so much.
Quoted 7 lines
Quoted 2 lines
I guess this makes me an honary Linux kernel contribitor, er... uncontributor... :)
I take what I said back temporarily, Marcelo didn't revert the change yet but I have just reminded him to do so.
It should be fixed by the time 2.4.23 final rolls out.
The mentioned change is already in bkbits.net.
Quoted 2 lines · David S. Miller
Marcelo has reverted the change in question, so his current 2.4.x tree should be fine.
Thank you all for reverting the pre4 change to ip_nat_core.c that was giving me problems.
I have 2.4.23-rc2 up and running fine.
Aloha => Beau;