Skip to contentSkip to conversation

serio chaining in 2.6.x?

DISCUSSION Zinx Verituse 2 participants 4 messages Nov 17, 2003

lore
Share & tools
lore
#0 lore raw

I have a device (the device in question is the infamous cuecat) which connects between the computer and a PS/2 device, and I'm trying to figure out a good way to chain serio devices, such as:

	atkbd <-> cuecat <-> lowlevel driver

The serio driver, however, is very clearly not designed for such chaining. So, the question is:

What do you folks think the best method for chaining the serio drivers is?

Signature · 1 line
Zinx Verituse
#1 lore raw
Quoted 10 lines · Zinx Verituse

I have a device (the device in question is the infamous cuecat) which connects between the computer and a PS/2 device, and I'm trying to figure out a good way to chain serio devices, such as:

	atkbd <-> cuecat <-> lowlevel driver

The serio driver, however, is very clearly not designed for such chaining. So, the question is:

What do you folks think the best method for chaining the serio drivers is?

You grab the port. Then you create a new one and register it. And you forward all data that's not destined for you through to the new serio port.

Signature · 2 lines
Vojtech Pavlik
SuSE Labs, SuSE CR
#2 lore raw
Quoted 2 lines · Vojtech Pavlik
Quoted 1 line · Zinx Verituse

[snip]

Quoted 9 lines
Quoted 2 lines

What do you folks think the best method for chaining the serio drivers is?

You grab the port. Then you create a new one and register it. And you forward all data that's not destined for you through to the new serio port.

Signature · 1 line
Vojtech Pavlik

Many thanks -- I hadn't considered creating a new port, and I'm sure this solution will work perfectly :)

Signature · 1 line
Zinx Verituse
#3 lore raw
Quoted 11 lines · Zinx Verituse
Quoted 2 lines · Vojtech Pavlik
Quoted 1 line · Zinx Verituse

[snip]

Quoted 7 lines
Quoted 2 lines

What do you folks think the best method for chaining the serio drivers is?

You grab the port. Then you create a new one and register it. And you forward all data that's not destined for you through to the new serio port.

Quoted 6 lines
Quoted 2 lines
Signature · 1 line
Vojtech Pavlik

Many thanks -- I hadn't considered creating a new port, and I'm sure this solution will work perfectly :)

Unfortunately, I hit a snag... I can't see a way to rescan or disconnect all the ports that need intercepted (or, indeed, any of them that are already connected)

Suggestions welcome :)

Signature · 1 line
Zinx Verituse