2.6.0-test9-mm4 (does not boot)
hello,
2.6.0-test9-mm4 doesn't boot for me ... oops followed by
kernel panic - attempted to kill init (2.6.0-test9 works fine). it crashes right after initialising PNP bios. The (undecoded) oops doesn't seem to make a lot of sense (i wrote the oops down and i typed it in), and ksymoops doesn't show a lot too.
Someone has an idea what this could be, or a hint to improve oops output ? (i can reproduce it as much as i want to)
------------------- oops output
general protection fault: 0000 [#1] PREEMPT SMP CPU: 0
EIP: 0098:[<00002d6c>] Not tainted VLI
EFLAGS: 00010097
EIP is at 0x2d6c
eax: 00003410 ebx: 00000082 ecx: 00020000 edx: 00000002
esi: 00002630 edi: c1a4004d ebp: c1a40000 esp: c1a47ee2
ds: 0060 es: 0060 ss:0068
Process swapper (PID:1 threadinfo=c1a46000 task=c1a5f980)
Stack: 00000410 341026de 00000000 836d004d 0004cfea 00020002 7f28830c cfeacff2
64090909 01090109 007b6264 6000007b 00a00246 622000b0 00a861e6 00000086
000b0000 00010090 00a80000 00b00000 00a00002 bee90000 0060c02b 00820000
Call Trace:Code:
bad EIP Value
------------------ ksymoops -V -K -L -o /lib/modules/2.6.0-test9-mm4/ -m /boot/System.map-2.6.0-test9-mm4 < /root/oops.txt
Warning (Oops_read): Code line not seen, dumping what data is available
Quoted 5 lines
Quoted 5 lines
EIP;
00002d6cBefore first symbol <=====edi;
c1a4004d<__crc_unregister_chrdev+112bbc/1668b5> ebp;c1a40000<__crc_unregister_chrdev+112b6f/1668b5> esp;c1a47ee2<__crc_unregister_chrdev+11aa51/1668b5>
----------------
op Wednesday 19 November 2003 07:52 , schreef Andrew Morton in <[email protected]> :
Quoted 10 lines
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.0-test9/2.6.0-test9-mm4/
. Several fixes against patches which are only in -mm at present.
. Minor fixes which we'll queue for post-2.6.0.
. The interactivity problems which the ACPI PM timer patch showed up
should be fixed here - please sing out if not.
Signature · 3 lines
Frank Dekervel - [email protected] Mechelsestraat 88 3000 Leuven (Belgium)
Quoted 4 lines · Frank Dekervel
2.6.0-test9-mm4 doesn't boot for me ... oops followed by kernel panic - attempted to kill init (2.6.0-test9 works fine). it crashes right after initialising PNP bios.
Please make sure that you have CONFIG_KALLSYMS set.
It would help to add `initcall_debug' to the kernel boot command line. That way you will find out the address of the final initcall which was invoked before the kernel crashed. Please look that up in System.map.
Thanks.
hello,
Op Thursday 20 November 2003 01:59, schreef Andrew Morton:
Quoted 5 lines
Quoted 3 lines
2.6.0-test9-mm4 doesn't boot for me ... oops followed by kernel panic - attempted to kill init (2.6.0-test9 works fine). it crashes right after initialising PNP bios.
Please make sure that you have
CONFIG_KALLSYMSset.
it is set ... but no decoded output. probably something is messed up
kervel@bakvis:~$ cat /boot/config-2.6.0-test9-mm4 | grep -i kall CONFIG_KALLSYMS=y
Quoted 4 lines
It would help to add `initcall_debug' to the kernel boot command line. That way you will find out the address of the final initcall which was invoked before the kernel crashed. Please look that up in System.map.
kervel@bakvis:~$ cat /boot/System.map-2.6.0-test9-mm4 | grep c052ed91 c052ed91 T pnpbios_init
pnpbios says something like this:
found installation structure 0xc00f5560
version 1.0 entry 0xf0000:0x6149 dseg 0xf0000
i'm going to try without pnpbios i think.
my working 2.6.0test9 also has pnpbios setup:
kervel@bakvis:~$ cat /boot/config-2.6.0-test9 | grep -i pnpbios CONFIG_PNPBIOS=y
greetings,
frank
Signature · 3 lines
Frank Dekervel - [email protected] Mechelsestraat 88 3000 Leuven (Belgium)
Op Thursday 20 November 2003 11:34, schreef Frank Dekervel:
Quoted 9 lines
pnpbios says something like this:
found installation structure0xc00f5560
version 1.0 entry 0xf0000:0x6149 dseg0xf0000i'm going to try without pnpbios i think.
my working 2.6.0test9 also has pnpbios setup:
kervel@bakvis:~$ cat /boot/config-2.6.0-test9 | grep -i pnpbios CONFIG_PNPBIOS=y
ok, replying to myself to be more specific:
working pnpbios gives this:
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f5560
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x614a, dseg 0xf0000
PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver SCSI subsystem initialized
mm4 pnpbios gives the same numbers, but never says
PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver instead it says general protection fault
sorry,
greetings,
frank
Signature · 3 lines
Frank Dekervel - [email protected] Mechelsestraat 88 3000 Leuven (Belgium)
Quoted 23 lines · Frank Dekervel
Op Thursday 20 November 2003 11:34, schreef Frank Dekervel:
Quoted 9 lines
pnpbios says something like this:
found installation structure0xc00f5560
version 1.0 entry 0xf0000:0x6149 dseg0xf0000i'm going to try without pnpbios i think.
my working 2.6.0test9 also has pnpbios setup:
kervel@bakvis:~$ cat /boot/config-2.6.0-test9 | grep -i pnpbios CONFIG_PNPBIOS=yok, replying to myself to be more specific:
working pnpbios gives this:
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at0xc00f5560
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x614a, dseg0xf0000
PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver SCSI subsystem initialized
Quoted 4 lines
mm4 pnpbios gives the same numbers, but never says
PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver instead it says general protection fault
There are three pnpbios patches in -mm:
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.0-test9/2.6.0-test9-mm4/broken-out/pnp-fix-1.patch ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.0-test9/2.6.0-test9-mm4/broken-out/pnp-fix-2.patch ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.0-test9/2.6.0-test9-mm4/broken-out/pnp-fix-3.patch
It would help if you could determine which (if any) of these are causing the problem. You can remove the patches with
cd /usr/src/linux patch -p1 -R < ~/pnp-fix-3.patch
etcetera.
Thanks.
hello,
Quoted 6 lines
mm4 pnpbios gives the same numbers, but never says
PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver instead it says general protection faultThere are three pnpbios patches in -mm:
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.0-test9/2.6.0-test9-mm4/broken-out/pnp-fix-1.patch
"With this patch, the PnPBIOS driver will read static resources
initially and then switch to dynamic mode when allocating resources for specific nodes."
-> this one causes the trouble (general protection fault -> kernel panic) for me... without this patch
my system boots (and recognises pnpbios) fine.
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.0-test9/2.6.0-test9-mm4/broken-out/pnp-fix-2.patch
"this patch provides an option for PnPBIOS calls to be
managed by the PnPBIOS driver exclusively" (no /proc support)
-> cannot be this one, since i enabled /proc support
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.0-test9/2.6.0-test9-mm4/broken-out/pnp-fix-3.patch
-> not pnpbios related (isapnp)
greetings,
frank
Signature · 3 lines
Frank Dekervel - [email protected] Mechelsestraat 88 3000 Leuven (Belgium)
hello
something similar:
catting /proc/bus/pnp/devices makes my system oops, doing it twice makes my system crash :p
the oops looks very much like the oops (also bad EIP value, also no stack trace) i get on boot with the first patch (below) applied. As i already mailed, i need to revert that patch to make my system boot.
this oops happens with all 3 patches below reverted, so i guess it'll happen too with stock test9.
would the -mm5 pnp-fix-4.patch be worth a try ? it seems related
thanks,
greetings,
frank
Op Thursday 20 November 2003 16:22, schreef Andrew Morton:
Quoted 14 lines
There are three pnpbios patches in -mm:
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.0-test9/2
.6.0-test9-mm4/broken-out/pnp-fix-1.patchftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.0-test9/2.6.0-test9-mm4/broken-out/pnp-fix-2.patchftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.0-test9/2.6.0-test9-mm4/broken-out/pnp-fix-3.patchIt would help if you could determine which (if any) of these are causing the problem. You can remove the patches with
cd
/usr/src/linux
patch -p1 -R <~/pnp-fix-3.patch
Signature · 3 lines
Frank Dekervel - [email protected] Mechelsestraat 88 3000 Leuven (Belgium)
Quoted 11 lines · Frank Dekervel
hello
something similar:
catting
/proc/bus/pnp/devicesmakes my system oops, doing it twice makes my system crash :pthe oops looks very much like the oops (also bad EIP value, also no stack trace) i get on boot with the first patch (below) applied. As i already mailed, i need to revert that patch to make my system boot.
Quoted 8 lines
this oops happens with all 3 patches below reverted, so i guess it'll happen too with stock test9.
would the -mm5 pnp-fix-4.patch be worth a try ? it seems related
thanks,
greetings,
frank
Hi,
Thanks for the testing. I don't think pnp-fix-4.patch should affect this problem. I will probably be creating a blacklist for PnPBIOS systems that have this bug. Currently, I'm waiting to see if reading static resources has any positive affects on some additional systems. If not then I may switch back to the the original behavior. DMI information for your system would be helpful.
Thanks,
Adam
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
Op Monday 24 November 2003 00:05, schreef u:
Quoted 9 lines
Quoted 5 lines
- will the original behaviour really solve the problem (not only a symptom) ? as i wrote, i can trigger almost the same oops (general protection fault #0000 , invalid EIP value ), probably non-fatal because another process is killed instead of the pid=1 process, and i can trigger it on a mm4 with all pnpbios fixes backed out ...
Yes but through the
/proc/bus/pnp/devicesfile. Correct? It is independent from this change and would also need to be corrected. Does the escd interface in/proc/bus/pnpalso trigger an oops?
yup it seems so, but this time with valid backtrace
bakvis:/proc/bus/pnp# cat escd Segmentation fault
in dmesg:
Unable to handle kernel paging request at virtual address fffec01a printing eip: 000055bf *pde = 00004067 *pte = 00000000 Oops: 0000 [#1] PREEMPT SMP CPU: 1 EIP: 0098:[<000055bf>] Tainted: PF VLI EFLAGS: 00210086
EIP is at 0x55bf
eax: 000001ff ebx: 00b06341 ecx: 000000a0 edx: 00000000
esi: 0000001a edi: 00000000 ebp: ce47de9c esp: ce47de68
ds: 00b0 es: 00a8 ss: 0068
Process cat (pid: 9496, threadinfo=ce47c000 task=e87fe080)
Stack: 000a0002 00b00000 000600a8 5b995598 00000000 635f00a0 007b0033 c000007b
0206ce47 61e60020 008600a8 00000100 0090000b 00000042 00b000a8 000000a0
00000000 c02bc9d2 00000060 00200082 00200033 c1210000 0000007b c017007b
Call Trace:
[<c02bc9d2>] __pnp_bios_read_escd+0x130/0x1bb
[<c017007b>] flush_old_exec+0x2cd/0xab2
[<c02bca78>] pnp_bios_read_escd+0x1b/0x40
[<c02bdcea>] proc_read_escd+0x65/0xf4
[<c02bdc85>] proc_read_escd+0x0/0xf4
[<c019d321>] proc_file_read+0xc4/0x26c
[<c01641b2>] vfs_read+0xb0/0x119
[<c0164459>] sys_read+0x42/0x63
[<c03f353b>] syscall_call+0x7/0xb
Code: Bad EIP value.
<6>note: cat[9496] exited with preempt_count 2greetings,
frank
Signature · 3 lines
Frank Dekervel - [email protected] Mechelsestraat 88 3000 Leuven (Belgium)
Quoted 6 lines · Frank Dekervel
Op Monday 24 November 2003 00:05, schreef u:
Quoted 5 lines
Quoted 5 lines
- will the original behaviour really solve the problem ?(not only a symptom) ? as i wrote, i can trigger almost the same oops (general protection fault #0000 , invalid EIP value ), probably non-fatal because another process is killed instead of the pid=1 process, and i can trigger it on a mm4 with all pnpbios fixes backed out ...
Is the oops triggered by reading /proc/bus/pnp/devices a general protection fault? Once in a while it will produce a different error in userspace. If so, I'd like to see the output.
Quoted 8 lines
Quoted 4 lines
Yes but through the
/proc/bus/pnp/devicesfile. ?Correct? ?It is independent from this change and would also need to be corrected. ?Does the escd interface in/proc/bus/pnpalso trigger an oops?yup it seems so, but this time with valid backtrace
bakvis:/proc/bus/pnp# cat escd Segmentation fault
Could you please try this patch (without pnp-patch-1)... It may fix the ESCD reading problem. If it doesn't oops when catted, you may want to test it out with lsescd by Gunther Mayer.
(http://home.t-online.de/home/gunther.mayer/lsescd-0.10.tar.bz2)
drivers/pnp/pnpbios/bioscalls.c +2 -2
@@ -493,7 +493,7 @@if (!pnp_bios_present ())return ESCD_FUNCTION_NOT_SUPPORTED ; status =call_pnp_bios (PNP_READ_ESCD ,0 ,PNP_TS1 ,PNP_TS2 ,PNP_DS ,0 ,0 ,0 , - data,65536 , (void *)nvram_base,65536 ); + data,65536 ,__va ((void *)nvram_base),65536 );return status; }
@@ -516,7 +516,7 @@if (!pnp_bios_present ())return ESCD_FUNCTION_NOT_SUPPORTED ; status =call_pnp_bios (PNP_WRITE_ESCD ,0 ,PNP_TS1 ,PNP_TS2 ,PNP_DS ,0 ,0 ,0 , - data,65536 , nvram_base,65536 ); + data,65536 ,__va ((void *)nvram_base),65536 ); return status; }#endif
Also just out of curiosity, could I see what the real mode CS and DS are? I'm looking for patterns...
So far all of the offenders have a datasegement at 0xf0000.
drivers/pnp/pnpbios/core.c +3 -0
@@ -460,6 +460,9 @@ check->fields.version >>4 , check->fields.version &15 , check->fields.pm16cseg, check->fields.pm16offset, check->fields.pm16dseg); +printk (KERN_INFO "PnPBIOS: realmode entry 0x%x:0x%x, dseg 0x%x\n" , + check->fields.rmcseg, check->fields.rmoffset, + check->fields.rmdseg); pnp_bios_install = check;return 1 ; }
Thanks,
Adam