Skip to contentSkip to conversation

cannot mask irqs by pci=irqmask=

DISCUSSION Jing Xu 2 participants 2 messages Nov 21, 2003

lore
Share & tools
lore

Jing Xu

author
#0 lore raw

Hello,

I'm having some trouble with PCI IRQ's and I was hoping someone here could help.

I'm running linux 2.4.20 and rtai 24.1.11. My linux kernel module needs to use IRQ 9 10 11 for AGP graphic card, sound card and PCI-Dio24 IO card. These irqs are also shared by USB controllers. My module hangs when it tries to request the above irqs used by USB devices. I figured it would be a good idea to remove this apparent conflict. I have scoured the web and found that I can reserve these IRQs by specifying pci=irqmask=0x0e10 on the kernel boot line.

I have tried to set "pci=irqmask=0x0e10" to reserve Irq 9 10 11 4 from my driver, and it hasn't had any effect - those irqs are still used by usb controllers on initialization.

How do I change these IRQ's? Is there some other configuration file I haven't found? If anyone can provide any insight into this, I would appreciate it greatly. Let me know what/if any details you need - I am by no means an expert in this area and didn't want to post reams of irrelevant information, but if there is something I'm missing let me know and I'll get it...

Thanks in advance,

jing

__________________________________
Do you Yahoo!?
Free Pop-Up Blocker - Get it now
http://companion.yahoo.com/

#1 lore raw
Quoted 8 lines · Jing Xu

How do I change these IRQ's? Is there some other configuration file I haven't found? If anyone can provide any insight into this, I would appreciate it greatly. Let me know what/if any details you need - I am by no means an expert in this area and didn't want to post reams of irrelevant information, but if there is something I'm missing let me know and I'll get it...

You can modify PCI slot IRQ assignment in your BIOS, or you could simply disable the USB driver in the kernel.