Skip to contentSkip to conversation

Multiple (three) RME Hammerfalls... any experience]

was Re: Patrick Shirkey 3 participants 3 messages Nov 29, 2003 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw

I have forwarded this to alsa-devel as there is probably more luck finding the answer here and it would be a valuable thread to have as a resource.

Quoted 102 lines · R Parker

Hi,

I can't help you much, however, unless JACK has recently been worked on I think there's a 32 track limitation. It's known to be technically trivial. Otherwise I don't believe alsa would be a problem, assuming you've got wordclock i/o on the hammerfall cards.

Midi Time Code syncronization in Ardour could also be problematic, it doesn't work with my Tascam DM-24. Even though transport location is accurate, the automation system can't interpret Ardour mtc. Paul has announced his intention to implement SMPTE but I'm not sure if that's been done yet.

I wonder what the status of 96kHz adat is with the hammerfall drivers.

Anyway, that's not much help. Sorry.

ron

Quoted 77 lines · --- Ronald van Engelen

Hi,

After rereading my message, I saw too many unclarities and typos, so
I'll try again.

The problem is that we have to transfer a few hours of 72-channel music
from three synced Mackie SDR24/96's to a harddisk. I don't really know what format the music is recorded in.

As my colleague is unable to use three RME Hammerfall DSP card's in his
dual G4 powermac with OSX (don't know exact version), I wondered if I
could use Linux to capture the music to harddisk.

If anybody has any experience, please let me know. Otherwise we will
proceed with one card and thus 24 channels at a time, which does work.

Thanks,
Ronald van Engelen

Op vr 28-11-2003, om 20:06 schreef Ronald van Engelen:

Quoted 3 lines

Hi there,

A colleague of mine is having major problems using

multiple (three) RME

Quoted 1 line

Hammerfall cards using Mac OS 9 and X and

consulted me for help.

Quoted 1 line

The problem is that he has to transfer a few hours

of 72-channel music

Quoted 1 line

(recorded with Mackie HDR's) to his harddisk for

further mixing and

Quoted 3 lines

processing.

I only have experience with (single and dual)

stereo cards using alsa,

Quoted 1 line

jack, ardour and ladspa. I wonder if anybody have

experience with

Quoted 1 line

multiple RME cards using alsa, and particullary

experience doing such a

Quoted 3 lines

task with mentioned tools?

I haven't had the chance to examine his

(Mac-related) problem but it

Quoted 1 line

sounds like he might suffering from problems

related to his

Quoted 6 lines

power-supply?

Regards,
Ronald van Engelen

Signature · 22 lines
Patrick Shirkey - Boost Hardware Ltd.
Http://www.boosthardware.com
Http://www.djcj.org - The Linux Audio Users guide
========================================


 Apparently upon the beginning of the barrage, the donkey broke 
discipline and panicked, toppling the cart. At that point, the rockets disconnected from the timer, leaving them strewn around the street. Tethered to the now toppled cart, the donkey was unable to escape before the arrival of U.S. troops.

United Press International
Rockets on donkeys hit major Baghdad sites

By P. MITCHELL PROTHERO
Published 11/21/2003 11:13 AM



-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program.
Does SourceForge.net help you be more productive?  Does it
help you create better code?  SHARE THE LOVE, and help us help
YOU!  Click Here: http://sourceforge.net/donate/
#2 lore raw
Quoted 3 lines
Quoted 3 lines

I can't help you much, however, unless JACK has recently been worked on I think there's a 32 track limitation. It's known to be technically trivial.

still in place at this time. there is a simple 1-2 line solution; i'm not sure if its the right one, since it simply substitutes a 64 channel limit.

Quoted 6 lines
Quoted 6 lines

Midi Time Code syncronization in Ardour could also be problematic, it doesn't work with my Tascam DM-24. Even though transport location is accurate, the automation system can't interpret Ardour mtc. Paul has announced his intention to implement SMPTE but I'm not sure if that's been done yet.

yes, to repeat a familiar refrain these days, being an MTC master on an unpatched linux system is, to the best of my knowledge, fundamentally impossible. your other systems will chase the linux master, but will not lock to it.

Quoted 2 lines
Quoted 2 lines

I wonder what the status of 96kHz adat is with the hammerfall drivers.

for the hdsp, its know to work fine. the digi9652 works, but it may require some work to configure the device properly. sorry i don't remember more (and i'm the author .. :)

Quoted 12 lines
Quoted 12 lines
Quoted 12 lines

The problem is that we have to transfer a few hours of 72-channel music
from three synced Mackie SDR24/96's to a harddisk. I don't really know
what format the music is recorded in.

As my colleague is unable to use three RME Hammerfall DSP card's in his
dual G4 powermac with OSX (don't know exact version), I wondered if I
could use Linux to capture the music to harddisk.

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

If anybody has any experience, please let me know. Otherwise we will
proceed with one card and thus 24 channels at a time, which does work.

i personally think you will have a much easier time doing it one card at a time. there is nothing about ALSA that will stop you from trying this, assuming as ron noted that you wordclock-sync all 3 cards. but you will also be streaming a large amount of data to disk (on the order of 13MB/sec at 48kHz, twice that at 96kHz), and you will need a pretty robust disk subsystem to manage this flawlessly.

--p

-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/

#3 lore raw
In reply to Patrick Shirkey

You're actually going to want 6 RME9652's if you want 72 channels at 96. In jackd/engine.c, change engine->port_max to 512. I think you won't need all of those, I think you'll need 304.

You can slave them together using pcm_multi as long as they're all linked with a master clock, alsa won't do it for you. Look for pcm.rme9652_96 in the archives, and if it's not there, I'll send it again. Be sure to use recent alsa, because syncing multiple cards kicked off a code change that prevented lockups. I'd be interested to know how low you could set your latency before jack kicks something out.

_J

Quoted 100 lines · Patrick Shirkey

I have forwarded this to alsa-devel as there is probably more luck finding the answer here and it would be a valuable thread to have as a resource.

Quoted 95 lines · R Parker

Hi,

I can't help you much, however, unless JACK has recently been worked on I think there's a 32 track limitation. It's known to be technically trivial. Otherwise I don't believe alsa would be a problem, assuming you've got wordclock i/o on the hammerfall cards.

Midi Time Code syncronization in Ardour could also be problematic, it doesn't work with my Tascam DM-24. Even though transport location is accurate, the automation system can't interpret Ardour mtc. Paul has announced his intention to implement SMPTE but I'm not sure if that's been done yet.

I wonder what the status of 96kHz adat is with the hammerfall drivers.

Anyway, that's not much help. Sorry.

ron

Quoted 70 lines · --- Ronald van Engelen

Hi,

After rereading my message, I saw too many unclarities and typos, so
I'll try again.

The problem is that we have to transfer a few hours of 72-channel music
from three synced Mackie SDR24/96's to a harddisk. I don't really know
what format the music is recorded in.

As my colleague is unable to use three RME Hammerfall DSP card's in his
dual G4 powermac with OSX (don't know exact version), I wondered if I
could use Linux to capture the music to harddisk.

If anybody has any experience, please let me know. Otherwise we will
proceed with one card and thus 24 channels at a time, which does work.

Thanks,
Ronald van Engelen

Op vr 28-11-2003, om 20:06 schreef Ronald van Engelen:

Quoted 3 lines

Hi there,

A colleague of mine is having major problems using

multiple (three) RME

Quoted 1 line

Hammerfall cards using Mac OS 9 and X and

consulted me for help.

Quoted 1 line

The problem is that he has to transfer a few hours

of 72-channel music

Quoted 1 line

(recorded with Mackie HDR's) to his harddisk for

further mixing and

Quoted 3 lines

processing.

I only have experience with (single and dual)

stereo cards using alsa,

Quoted 1 line

jack, ardour and ladspa. I wonder if anybody have

experience with

Quoted 1 line

multiple RME cards using alsa, and particullary

experience doing such a

Quoted 3 lines

task with mentioned tools?

I haven't had the chance to examine his

(Mac-related) problem but it

Quoted 1 line

sounds like he might suffering from problems

Quoted 41 lines
Quoted 8 lines
Quoted 8 lines

related to his

Quoted 6 lines

power-supply?

Regards,
Ronald van Engelen

Signature · 29 lines
Patrick Shirkey - Boost Hardware Ltd.
Http://www.boosthardware.com
Http://www.djcj.org - The Linux Audio Users guide
========================================


  Apparently upon the beginning of the barrage, the donkey broke 
discipline and panicked, toppling the cart. At that point, the rockets 
disconnected from the timer, leaving them strewn around the street. 
Tethered to the now toppled cart, the donkey was unable to escape before 
the arrival of U.S. troops.

United Press International
Rockets on donkeys hit major Baghdad sites

By P. MITCHELL PROTHERO
Published 11/21/2003 11:13 AM



-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program.
Does SourceForge.net help you be more productive?  Does it
help you create better code?  SHARE THE LOVE, and help us help
YOU!  Click Here: http://sourceforge.net/donate/
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel

-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/