Promise 20378 + 2.6.0-test10 + libata patch 1
Quoted 4 lines
From: Jeff Garzik <[email protected]>
Nope, libata Promise driver only supports Serial ATA.
Bummer. Will it ever support PATA?
Is the Promise RAID support noticably faster than using md and a dumb ATA/133 controller?
I'm trying to decide now if I should get a couple SATA<>PATA convertors, or just get a dumb ATA/133 controller and go that way with md.
_________________________________________________________________
Gift-shop online from the comfort of home at MSN Shopping! No crowds, free parking. http://shopping.msn.com
Quoted 7 lines · Joe Blow
Quoted 4 lines
From: Jeff Garzik <[email protected]>
Nope, libata Promise driver only supports Serial ATA.
Bummer. Will it ever support PATA?
No plans.
Quoted 1 line
Is the Promise RAID support noticably faster than using md and a dumb ATA/133 controller?
Using standard kernel drivers, Promise RAID _is_ md.
Jeff
Quoted 10 lines · Jeff Garzik
Quoted 7 lines · Joe Blow
Quoted 4 lines
From: Jeff Garzik <[email protected]>
Nope, libata Promise driver only supports Serial ATA.
Bummer. Will it ever support PATA?
No plans.
What exactly is needed to get got SATA and PATA support comparable to the driver provided by promise? Would it be possible to adapt the existing promise PATA IDE driver to drive the PATA port, while the libata Promise driver handles the SATA ports. Or would a new driver be needed?
How would the two drivers share the same PCI device?
-Erik
--
Erik B. Andersen http://codepoet-consulting.com/
--This message was written using 73% post-consumer electrons--
Quoted 14 lines · Erik Andersen
Quoted 10 lines · Jeff Garzik
Quoted 6 lines · Joe Blow
Quoted 3 lines
From: Jeff Garzik <[email protected]>
Nope, libata Promise driver only supports Serial ATA.
Bummer. Will it ever support PATA?
No plans.
Quoted 7 lines
What exactly is needed to get got SATA and PATA support comparable to the driver provided by promise? Would it be possible to adapt the existing promise PATA IDE driver to drive the PATA port, while the libata Promise driver handles the SATA ports. Or would a new driver be needed?
How would the two drivers share the same PCI device?
It looks like libata pretty much needs to do PATA, in this case and a couple others. Promise sent me a couple 2037x test cards with a PATA port on them, so just now need the time... :)
Getting PATA disks working should be very, very easy. Getting ATAPI devices working requires some libata core hacking, though the ATAPI code is mostly there already.
Jeff