2.4.23aa1
This should be the last 2.4-aa kernel ;)
URL:
http://www.us.kernel.org/pub/linux/kernel/people/andrea/kernels/v2.4/2.4.23aa1.gz
Changelog diff between 2.4.22pre6aa3 and 2.4.23aa1:
Only in 2.4.23pre6aa3: 00_binfmt-elf-checks-3 Only in 2.4.23aa1: 00_binfmt-elf-checks-4 Only in 2.4.23pre6aa3: 00_extraversion-32 Only in 2.4.23aa1: 00_extraversion-33
Only in 2.4.23pre6aa3: 00_nfs_writeback-1 Only in 2.4.23aa1: 00_nfs_writeback-2
Only in 2.4.23pre6aa3: 00_silent-stack-overflow-19 Only in 2.4.23aa1: 00_silent-stack-overflow-20 Only in 2.4.23pre6aa3: 05_vm_22_vm-anon-lru-2 Only in 2.4.23aa1: 05_vm_22_vm-anon-lru-3 Only in 2.4.23pre6aa3: 05_vm_26-rest-1 Only in 2.4.23aa1: 05_vm_26-rest-2
Only in 2.4.23pre6aa3: 10_inode-highmem-2 Only in 2.4.23aa1: 10_inode-highmem-3
Only in 2.4.23pre6aa3: 60_tux-exports-7 Only in 2.4.23aa1: 60_tux-exports-8
Only in 2.4.23pre6aa3: 70_iget-1
Only in 2.4.23aa1: 70_iget-2
Only in 2.4.23pre6aa3: 93_NUMAQ-14
Only in 2.4.23aa1: 93_NUMAQ-16
Only in 2.4.23pre6aa3: 9900_aio-24.gz
Only in 2.4.23aa1: 9900_aio-25.gz
Only in 2.4.23pre6aa3: 9910_shm-largepage-17.gz Only in 2.4.23aa1: 9910_shm-largepage-18.gz Only in 2.4.23pre6aa3: 9920_kgdb-12.gz Only in 2.4.23aa1: 9920_kgdb-13.gz
Only in 2.4.23pre6aa3: 9925_kmsgdump-0.4.4-4.gz Only in 2.4.23aa1: 9925_kmsgdump-0.4.4-5.gz Only in 2.4.23pre6aa3: 9980_fix-pausing-6 Only in 2.4.23aa1: 9980_fix-pausing-7
Only in 2.4.23pre6aa3: 9985_blk-atomic-12 Only in 2.4.23aa1: 9985_blk-atomic-13
Only in 2.4.23pre6aa3: 9999900_q-full-1 Only in 2.4.23aa1: 9999900_q-full-2
Only in 2.4.23pre6aa3: 9999_mmap-cache-2 Only in 2.4.23aa1: 9999_mmap-cache-3
Only in 2.4.23pre6aa3: 9999_sched_yield_scale-8 Only in 2.4.23aa1: 9999_sched_yield_scale-9 Only in 2.4.23pre6aa3: 9999_zzz-dynamic-hz-3.gz Only in 2.4.23aa1: 9999_zzz-dynamic-hz-4.gz
Rediffed.
Only in 2.4.23pre6aa3: 00_do_brk-1
Only in 2.4.23pre6aa3: 00_pppoe-release-1
Only in 2.4.23pre6aa3: 00_proc-readlink-1
Only in 2.4.23pre6aa3: 00_sk98lin-char-fix-1
Only in 2.4.23pre6aa3: 00_tcp-conntrack-fin-1
Only in 2.4.23pre6aa3: 9999_01_x86_64-fault32-wrap-1 Only in 2.4.23pre6aa3: 9999900_shmem_truncate-against-swapoff-1 Only in 2.4.23pre6aa3: 9999_z-laptopmode-1
Merged in mainline.
Only in 2.4.23aa1: 00_readahead-last-page-1
Make sure to read the last page of a file via readahead if possible, otherwise we could send two synchronous requests down to the fs instead of a single one. Fix from Chuck Lever.
Only in 2.4.23aa1: 05_vm_00_anon-lru-race-better-fix-1
Serialize inserction in swapcache with the pagemap_lru_lock spinlock, to avoid having to use a flood of atomic ops (this benefits especially non x86 archs, for x86 if the cacheline is in l1 it's not a big cost). pagecache operations are unaffected this way.
Only in 2.4.23pre6aa3: 9999_z-execve-race-1 Only in 2.4.23aa1: 05_vm_02-execve-mm-fast-path-safe-1
Avoid dropping the fast path in execve when mm_users == 1. Original fix from Ernie Petrides.
Only in 2.4.23aa1: 30_00_posix-race-1 Only in 2.4.23aa1: 30_02_fix-commit-1 Only in 2.4.23aa1: 30_03_fix-osx-1
Only in 2.4.23aa1: 30_04_soft2-1
Only in 2.4.23pre6aa3: 30_05_seekdir-1 Only in 2.4.23aa1: 30_05_seekdir-2
Only in 2.4.23pre6aa3: 30_08_rdplus-1 Only in 2.4.23aa1: 30_08_rdplus-2
Only in 2.4.23aa1: 30_09_fix-unlink-1 Only in 2.4.23aa1: 30_10-sock-disconnect-1 Only in 2.4.23pre6aa3: 30_12-lockd3-1 Only in 2.4.23aa1: 30_12-lockd3-2
Only in 2.4.23pre6aa3: 30_14-pathconf-2 Only in 2.4.23aa1: 30_14-pathconf-3
Only in 2.4.23pre6aa3: 30_18-busy-inodes-1
NFS updates from Trond's website.
Only in 2.4.23pre6aa3: 50_uml-patch-2.4.20-5-2.gz Only in 2.4.23aa1: 50_uml-patch-2.4.20-5-3.gz
Rediffed. The new version pretents to change the API for munmap in the f_ops, that's too invasive for 2.4 IMHO.
Only in 2.4.23pre6aa3: 90_ext3-commit-interval-5
Obsoleted by the laptop mode (I hope it's "fully" obsoleted ;).
Only in 2.4.23pre6aa3: 9986_elevator-merge-fast-path-2
Dropped, seems to have a race of some sort (triggers on some ia64).
Quoted 4 lines · Andrea Arcangeli
Only in 2.4.23pre6aa3: 90_ext3-commit-interval-5
Obsoleted by the laptop mode (I hope it's "fully" obsoleted ;).
Maybe not. I saw one report here on lkml that showed that ext3-commit-interval is still needed even with laptop mode. :(
Quoted 8 lines · Mike Fedyk
Quoted 4 lines · Andrea Arcangeli
Only in 2.4.23pre6aa3: 90_ext3-commit-interval-5
Obsoleted by the laptop mode (I hope it's "fully" obsoleted ;).
Maybe not. I saw one report here on lkml that showed that ext3-commit-interval is still needed even with laptop mode. :(
It would be a bug of the laptop mode patch merged in mainline in such case. I tracked related changes in ext3, so I assumed it was just covered. If it isn't covered, laptop mode will be useless because the hd will never go to sleep ;)
Re: 2.4.23aa1 - scsi/pcmcia qlogic still does not build (m)
In reply to Andrea ArcangeliQuoted 2 lines · Andrea Arcangeli
This should be the last 2.4-aa kernel ;)
I guess nobody volunteered to fix it since -pre6aa2...
It builds just fine in vanilla 2.4.23.
--
Eyal Lebedinsky ([email protected]) <http://samba.org/eyal/>
Re: 2.4.23aa1 - scsi/pcmcia qlogic still does not build (m)
Quoted 7 lines · Eyal Lebedinsky
Quoted 2 lines · Andrea Arcangeli
This should be the last 2.4-aa kernel ;)
I guess nobody volunteered to fix it since -pre6aa2...
It builds just fine in vanilla 2.4.23.
is the error still the same as in your email with ID [email protected] right?
If nobody sends a fix I'll have another quick look after I'm back from vacations on Thu.
Also for the i2c troubles (you mentioned those last time), you can try if this helps.
drivers/i2c/i2c-elektor.c +1 -1
@@ -167,7 +167,6 @@ static struct i2c_algo_pcf_data pcf_isa_ .waitforpin = pcf_isa_waitforpin, .udelay = 10, .mdelay = 10, - .timeout = HZ, };static struct i2c_adapter pcf_isa_ops = {
@@ -179,6 +178,7 @@ static struct i2c_adapter pcf_isa_ops =static int __init i2c_pcfisa_init (void ) { + pcf_isa_data.timeout =HZ ;#ifdef __alpha__/* check to see we have memory mapped PCF8584 connected to the Cypress cy82c693 PCI-ISA bridge as on UP2000 board */
drivers/i2c/i2c-elv.c +1 -1
@@ -124,7 +124,6 @@ static struct i2c_algo_bit_data bit_elv_ .getscl = bit_elv_getscl, .udelay = 80, .mdelay = 80, - .timeout = HZ };static struct i2c_adapter bit_elv_ops = {
@@ -137,6 +136,7 @@ static struct i2c_adapter bit_elv_ops =static int __init i2c_bitelv_init (void ) {printk (KERN_INFO "i2c-elv.o: i2c ELV parallel port adapter module version %s (%s)\n" ,I2C_VERSION ,I2C_DATE ); + bit_elv_data.timeout =HZ ;if (base==0 ) {/* probe some values */ base=DEFAULT_BASE ;
drivers/i2c/i2c-hydra.c +1 -1
@@ -107,7 +107,6 @@ static struct i2c_algo_bit_data bit_hydr .getscl = bit_hydra_getscl, .udelay = 5, .mdelay = 5, - .timeout = HZ };static struct i2c_adapter bit_hydra_ops = {
@@ -154,6 +153,7 @@ static struct pci_driver hydra_driver =static int __init i2c_hydra_init (void ) { + bit_hydra_data.timeout =HZ ;return pci_module_init (&hydra_driver); }
drivers/i2c/i2c-i810.c +4 -2
@@ -189,7 +189,6 @@ static struct i2c_algo_bit_data i810_i2c .getscl = bit_i810i2c_getscl, .udelay = CYCLE_DELAY, .mdelay = CYCLE_DELAY, - .timeout = TIMEOUT, };static struct i2c_adapter i810_i2c_adapter = {
@@ -206,7 +205,6 @@ static struct i2c_algo_bit_data i810_ddc .getscl = bit_i810ddc_getscl, .udelay = CYCLE_DELAY, .mdelay = CYCLE_DELAY, - .timeout = TIMEOUT, };static struct i2c_adapter i810_ddc_adapter = {
@@ -293,6 +291,10 @@ static int __init i2c_i810_init(void)/* return pci_module_init(&i810_driver); */ + + i810_i2c_bit_data.timeout =TIMEOUT ; + i810_ddc_bit_data.timeout =TIMEOUT ; +pci_for_each_dev (dev) { id =pci_match_device (i810_ids, dev);if (id)
drivers/i2c/i2c-philips-par.c +3 -2
@@ -137,7 +137,6 @@ static struct i2c_algo_bit_data bit_lp_d .getscl = bit_lp_getscl, .udelay = 80, .mdelay = 80, - .timeout = HZ };static struct i2c_algo_bit_data bit_lp_data2 = {
@@ -146,7 +145,6 @@ static struct i2c_algo_bit_data bit_lp_d .getsda = bit_lp_getsda2, .udelay = 80, .mdelay = 80, - .timeout = HZ };static struct i2c_adapter bit_lp_ops = {
@@ -236,6 +234,9 @@ int __init i2c_bitlp_init(void) {printk (KERN_INFO "i2c-philips-par.o: i2c Philips parallel port adapter module version %s (%s)\n" ,I2C_VERSION ,I2C_DATE ); + bit_lp_data.timeout =HZ ; + bit_lp_data2.timeout =HZ ; +parport_register_driver (&i2c_driver);return 0 ;
drivers/i2c/i2c-savage4.c +3 -1
@@ -158,7 +158,6 @@ static struct i2c_algo_bit_data sav_i2c_ .getscl = bit_savi2c_getscl, .udelay = CYCLE_DELAY, .mdelay = CYCLE_DELAY, - .timeout = TIMEOUT };static struct i2c_adapter savage4_i2c_adapter = {
@@ -215,6 +214,9 @@ static int __init i2c_savage4_init(void)/* return pci_module_init(&savage4_driver); */ + + sav_i2c_bit_data.timeout =TIMEOUT ; +pci_for_each_dev (dev) { id =pci_match_device (savage4_ids, dev);if (id)
drivers/i2c/i2c-velleman.c +1 -1
@@ -110,7 +110,6 @@ static struct i2c_algo_bit_data bit_vell .getscl = bit_velle_getscl, .udelay = 10, .mdelay = 10, - .timeout = HZ };static struct i2c_adapter bit_velle_ops = {
@@ -123,6 +122,7 @@ static struct i2c_adapter bit_velle_opsstatic int __init i2c_bitvelle_init (void ) {printk (KERN_INFO "i2c-velleman.o: i2c Velleman K8000 adapter module version %s (%s)\n" ,I2C_VERSION ,I2C_DATE ); + bit_velle_data.timeout =HZ ;if (base==0 ) {/* probe some values */ base=DEFAULT_BASE ;
drivers/i2c/i2c-via.c +3 -1
@@ -89,7 +89,6 @@ static struct i2c_algo_bit_data bit_data .getscl = bit_via_getscl, .udelay = 5, .mdelay = 5, - .timeout = HZ };static struct i2c_adapter vt586b_adapter = {
@@ -179,6 +178,9 @@ static int __init i2c_vt586b_init(void)/* return pci_module_init(&vt586b_driver); */ + + bit_data.timeout =HZ ; +pci_for_each_dev (dev) { id =pci_match_device (vt586b_ids, dev);if (id)
drivers/i2c/i2c-voodoo3.c +4 -2
@@ -178,7 +178,6 @@ static struct i2c_algo_bit_data voo_i2c_ .getscl = bit_vooi2c_getscl, .udelay = CYCLE_DELAY, .mdelay = CYCLE_DELAY, - .timeout = TIMEOUT };static struct i2c_adapter voodoo3_i2c_adapter = {
@@ -195,7 +194,6 @@ static struct i2c_algo_bit_data voo_ddc_ .getscl = bit_vooddc_getscl, .udelay = CYCLE_DELAY, .mdelay = CYCLE_DELAY, - .timeout = TIMEOUT };static struct i2c_adapter voodoo3_ddc_adapter = {
@@ -263,6 +261,10 @@ static int __init i2c_voodoo3_init(void)/* return pci_module_init(&voodoo3_driver); */ + + voo_i2c_bit_data.timeout =TIMEOUT ; + voo_ddc_bit_data.timeout =TIMEOUT ; +pci_for_each_dev (dev) { id =pci_match_device (voodoo3_ids, dev);if (id)
Thanks.
Re: 2.4.23aa1 - scsi/pcmcia qlogic still does not build (m)
Quoted 4 lines · Andrea Arcangeli
Quoted 2 lines · Eyal Lebedinsky
Quoted 1 line · Andrea Arcangeli
Quoted 8 lines
Quoted 5 lines
Quoted 1 line
This should be the last 2.4-aa kernel ;)
I guess nobody volunteered to fix it since -pre6aa2...
It builds just fine in vanilla 2.4.23.
is the error still the same as in your email with ID [email protected] right?
Yes, problem with module_init. Same with fdomain etc..
I disabled the subsystem in order to complete the build.
Here is an example of the failure (for another module in this subsystem):
ld -m elf_i386 -r -o aha152x_cs.o aha152x_stub.o aha152x.o aha152x.o: In function `init_module':aha152x.o(.text+0x50f0): multiple definition of `init_module' aha152x_stub.o(.text+0x740): first defined here
ld: Warning: size of symbol `init_module' changed from 77 to 58 in aha152x.o
aha152x.o: In function `cleanup_module':aha152x.o(.text+0x5130): multiple definition of `cleanup_module' aha152x_stub.o(.text+0x790): first defined here
ld: Warning: size of symbol `cleanup_module' changed from 40 to 16 in aha152x.o
make[3]: *** [aha152x_cs.o] Error 1
make[3]: Leaving directory `/data2/usr/local/src/linux-2.4-aa/drivers/scsi/pcmcia'
--
Eyal Lebedinsky ([email protected]) <http://samba.org/eyal/>
Eyal Lebedinsky
AppliedRe: 2.4.23aa1 - scsi/pcmcia qlogic still does not build (m)
In reply to Andrea ArcangeliQuoted 2 lines · Andrea Arcangeli
Also for the i2c troubles (you mentioned those last time), you can try if this helps.
I applied fixes similar to your suggestion to i2c-2.7.0 and lm_sensors-2.7.0 to get these to build, looks OK.
My final depmod has this problem though:
depmod: *** Unresolved symbols in /lib/modules/2.4.23aa1/kernel/drivers/video/sis/sisfb.o
depmod: __floatsidf depmod: __divdf3 depmod: __fixunsdfsi depmod: __muldf3 depmod: __adddf3
I do not have this problem with 2.4.23, and I see the -aa1 patch actually removing some FP ops. But therer are some left in other sources (e.g. sis_main.c) so maybe some link problem was exposed?
Reverting the sis/init.c hunk does not fix this. Can it be related to this in arch/i386/Makefile:
-CFLAGS += -pipe
+CFLAGS += -pipe -msoft-float
--
Eyal Lebedinsky ([email protected]) <http://samba.org/eyal/>
Re: 2.4.23aa1 - scsi/pcmcia qlogic still does not build (m)
Quoted 17 lines · Eyal Lebedinsky
Quoted 2 lines · Andrea Arcangeli
Also for the i2c troubles (you mentioned those last time), you can try if this helps.
I applied fixes similar to your suggestion to i2c-2.7.0 and lm_sensors-2.7.0 to get these to build, looks OK.
My final depmod has this problem though:
depmod: *** Unresolved symbols in
/lib/modules/2.4.23aa1/kernel/drivers/video/sis/sisfb.odepmod: __floatsidf depmod: __divdf3 depmod: __fixunsdfsi depmod: __muldf3 depmod: __adddf3
Quoted 3 lines
I do not have this problem with 2.4.23, and I see the -aa1 patch actually removing some FP ops. But therer are some left in other sources (e.g.
sis_main.c) so maybe some link problem was exposed?
yes I've a 150k compressed updated driver from Thomas Winischhofer in my inbox for Marcelo that should fix those bugs (that would obsolete the non complete 00_sis-fpu-bugs-1), I thought it was merged in mainline but obviously not as 00_sis-fpu-bugs-1 wouldn't apply anymore. I guess Marcelo rejected it because it was very big and it wasn't fix the strict fpu bugs revealed by the -msoft-float, just guessing.
Review
Quoted 5 lines
Reverting the
sis/init.chunk does not fix this. Can it be related to this inarch/i386/Makefile:(quoted diff) +1
-1-CFLAGS += -pipe +CFLAGS += -pipe -msoft-float
yes it's related, reverting it would hide the bug, the module would load again but userspace could be corrupted at runtime.